Re: Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>Basically OK, but you have lots of whitespace issues, so I can't apply
>your patch. Please resend and make sure it applies.

Sorry, I rewrite my patch here.

Signed-off-by: EunBong Song <eunb.song@xxxxxxxxxxx>
 ---
 drivers/i2c/busses/i2c-octeon.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 935585e..b2e3259 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -183,7 +183,7 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
 	struct octeon_i2c *i2c = dev_id;
 
 	octeon_i2c_int_disable(i2c);
-	wake_up_interruptible(&i2c->queue);
+	wake_up(&i2c->queue);
 
 	return IRQ_HANDLED;
 }
@@ -206,9 +206,9 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
 
 	octeon_i2c_int_enable(i2c);
 
-	result = wait_event_interruptible_timeout(i2c->queue,
-						  octeon_i2c_test_iflg(i2c),
-						  i2c->adap.timeout);
+	result = wait_event_timeout(i2c->queue,
+					octeon_i2c_test_iflg(i2c),
+					i2c->adap.timeout);
 
 	octeon_i2c_int_disable(i2c);
 
-- 
1.7.0.1

Thanks.ÿ淸º{.nÇ+돴윯돪†+%듚ÿ깁負¥Šwÿº{.nÇ+돴¥Š{깸-쒩)í끾èw*jgП¨¶‰šŽ듶¢jÿ¾?G«앶ÿ◀◁¦j:+v돣ŠwèjØm¶Ÿÿ?®w?듺þf"·hš뤴얎ÿ녪¥


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux