Linux Hardware Monitor

• Thread Index

• Re: [PATCH 6/8] hwmon: (tmp421) support specifying n-factor via DT
  • From: Guenter Roeck
• Re: [PATCH 7/8] hwmon: (tmp421) really disable channels
  • From: Guenter Roeck
• Re: [PATCH 5/8] hwmon: (tmp421) support disabling channels from DT
  • From: Guenter Roeck
• [PATCH 8/8] dt-bindings: hwmon: allow specifying channels for tmp421
  • From: Krzysztof Adamski
• [PATCH 7/8] hwmon: (tmp421) really disable channels
  • From: Krzysztof Adamski
• [PATCH 6/8] hwmon: (tmp421) support specifying n-factor via DT
  • From: Krzysztof Adamski
• [PATCH 5/8] hwmon: (tmp421) support disabling channels from DT
  • From: Krzysztof Adamski
• [PATCH 4/8] hwmon: (tmp421) add support for defining labels from DT
  • From: Krzysztof Adamski
• [PATCH 3/8] hwmon: (tmp421) introduce a channel struct
  • From: Krzysztof Adamski
• [PATCH 2/8] hwmon: (tmp421) introduce MAX_CHANNELS define
  • From: Krzysztof Adamski
• [PATCH 1/8] dt-bindings: hwmon: add missing tmp421 binding
  • From: Krzysztof Adamski
• [PATCH 0/8] Add per channel properies support in tmp421
  • From: Krzysztof Adamski
• [PATCH v4] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• Re: [PATCH] hwmon: (raspberrypi) Use generic notification mechanism
  • From: Guenter Roeck
• [PATCH] hwmon: (raspberrypi) Use generic notification mechanism
  • From: W_Armin
• Re: [PATCH RESEND] hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_info
  • From: Guenter Roeck
• Re: [PATCH v2 23/52] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Guenter Roeck
• [hwmon:hwmon] BUILD SUCCESS 15d4ec3b12b54ff069016f15c8e66aa727f6d890
  • From: kernel test robot
• Re: [PATCH v2 23/52] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Rob Herring
• Re: [PATCH] hwmon: (dell-smm) Show fan_max param in sysfs
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (dell-smm) Show fan_max param in sysfs
  • From: Armin Wolf
• Re: [PATCH] hwmon: (dell-smm) Show fan_max param in sysfs
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (dell-smm) Show fan_max param in sysfs
  • From: Pali Rohár
• [PATCH] hwmon: (dell-smm) Show fan_max param in sysfs
  • From: W_Armin
• Re: [PATCH 3/3] k10temp: Add power sensor for family 19h
  • From: Guenter Roeck
• Re: [PATCH 2/3] k10temp: Remove residues of current and voltage
  • From: Guenter Roeck
• Re: [PATCH 1/3] x86/amd_nb: Add support for HSMP mailbox access
  • From: Borislav Petkov
• [PATCH 3/3] k10temp: Add power sensor for family 19h
  • From: Naveen Krishna Chatradhi
• [PATCH 2/3] k10temp: Remove residues of current and voltage
  • From: Naveen Krishna Chatradhi
• [PATCH 1/3] x86/amd_nb: Add support for HSMP mailbox access
  • From: Naveen Krishna Chatradhi
• Re: [PATCH v3] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Guenter Roeck
• RE: [PATCH v3] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• [PATCH v2 23/52] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Maxime Ripard
• Re: [GIT PULL] hwmon updates for v5.15
  • From: pr-tracker-bot
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Brandon Wyman
• Re: [PATCH 1/2] dt-bindings: hwmon: merge max1619 into trivial devices
  • From: Rob Herring
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Guenter Roeck
• [GIT PULL] hwmon updates for v5.15
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Brandon Wyman
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Guenter Roeck
• Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property
  • From: Chris Packham
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Eddie James
• Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Eddie James
• Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property
  • From: Chris Packham
• Re: [PATCH v2 07/15] peci: Add peci-aspeed controller driver
  • From: Winiarska, Iwona
• [hwmon:watchdog-next] BUILD SUCCESS 3b24fa6d46ee110170f34d7362281410999435a8
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 0e35f63f7f4eebd268ec236fd1bbf4e561ce8de5
  • From: kernel test robot
• Re: [PATCH v2] hwmon: add driver for Aquacomputer D5 Next
  • From: Aleksa Savic
• Re: [PATCH v2] hwmon: add driver for Aquacomputer D5 Next
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Guenter Roeck
• [PATCH v2] hwmon: add driver for Aquacomputer D5 Next
  • From: Aleksa Savic
• [PATCH] hwmon: (pmbus/ibm-cffps) Do not swap max_power_out
  • From: Brandon Wyman
• Re: [PATCH v2 3/3] hwmon: (k10temp): Show errors failing to read
  • From: Guenter Roeck
• Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property
  • From: Guenter Roeck
• Re: [PATCH v2 3/4] hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
  • From: Guenter Roeck
• Re: [PATCH v2 10/15] peci: Add support for PECI device drivers
  • From: Dan Williams
• Re: [PATCH v2 2/4] hwmon: (adt7470) Convert to use regmap
  • From: Guenter Roeck
• Re: [PATCH v2 1/4] hwmon: (adt7470) Fix some style issues
  • From: Guenter Roeck
• Re: [PATCH v2 3/3] hwmon: (k10temp): Show errors failing to read
  • From: Limonciello, Mario
• Re: [PATCH v2 3/3] hwmon: (k10temp): Show errors failing to read
  • From: Guenter Roeck
• Re: [PATCH v2 2/3] hwmon: (k10temp): Add support for yellow carp
  • From: Guenter Roeck
• Re: [PATCH v2 1/3] hwmon: (k10temp): Rework the temperature offset calculation
  • From: Guenter Roeck
• Re: [PATCH 5/6] hwmon: (k10temp): Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
  • From: Limonciello, Mario
• Re: [PATCH v2 2/3] hwmon: (k10temp): Add support for yellow carp
  • From: Borislav Petkov
• [PATCH v2 2/3] hwmon: (k10temp): Add support for yellow carp
  • From: Mario Limonciello
• [PATCH v2 3/3] hwmon: (k10temp): Show errors failing to read
  • From: Mario Limonciello
• [PATCH v2 0/3] Extend k10temp support for more APUs
  • From: Mario Limonciello
• [PATCH v2 1/3] hwmon: (k10temp): Rework the temperature offset calculation
  • From: Mario Limonciello
• Re: [PATCH] hwmon: add driver for Aquacomputer D5 Next
  • From: Aleksa Savic
• Re: [PATCH v2 09/15] peci: Add sysfs interface for PECI bus
  • From: Dan Williams
• Re: [PATCH v2 08/15] peci: Add device detection
  • From: Dan Williams
• Re: [PATCH 5/6] hwmon: (k10temp): Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
  • From: Guenter Roeck
• Re: [PATCH 1/6] hwmon: (k10temp): Add additional missing Zen2 and Zen3 APUs
  • From: Guenter Roeck
• Re: [PATCH v2 07/15] peci: Add peci-aspeed controller driver
  • From: Dan Williams
• Re: [PATCH] hwmon: add driver for Aquacomputer D5 Next
  • From: Guenter Roeck
• [PATCH] hwmon: add driver for Aquacomputer D5 Next
  • From: Aleksa Savic
• Re: [PATCH v2 07/15] peci: Add peci-aspeed controller driver
  • From: Winiarska, Iwona
• Re: [PATCH v2 06/15] peci: Add core infrastructure
  • From: Winiarska, Iwona
• Re: [PATCH 2/6] x86/amd_nb: Rename PCI_DEVICE_ID_AMD_19H_DF_F3 to match specific model
  • From: Guenter Roeck
• Re: [PATCH 3/6] hwmon: (k10temp): Rework the temperature offset calculation
  • From: Guenter Roeck
• Re: [PATCH 4/6] hwmon: (k10temp): Show errors failing to read
  • From: Guenter Roeck
• [PATCH 6/6] hwmon: (k10temp): Add support for yellow carp
  • From: Mario Limonciello
• [PATCH 3/6] hwmon: (k10temp): Rework the temperature offset calculation
  • From: Mario Limonciello
• [PATCH 5/6] hwmon: (k10temp): Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
  • From: Mario Limonciello
• [PATCH 2/6] x86/amd_nb: Rename PCI_DEVICE_ID_AMD_19H_DF_F3 to match specific model
  • From: Mario Limonciello
• [PATCH 4/6] hwmon: (k10temp): Show errors failing to read
  • From: Mario Limonciello
• [PATCH 1/6] hwmon: (k10temp): Add additional missing Zen2 and Zen3 APUs
  • From: Mario Limonciello
• [PATCH 0/6] Add k10temp support for more client APUs
  • From: Mario Limonciello
• [hwmon:hwmon-next] BUILD SUCCESS b3a7ab2d4376726178909e27b6956c012277ac4e
  • From: kernel test robot
• Re: [PATCH] asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
  • From: Hans de Goede
• [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property
  • From: Chris Packham
• [PATCH v2 0/4] hwmon: (adt7470) Clean up
  • From: Chris Packham
• [PATCH v2 3/4] hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
  • From: Chris Packham
• [PATCH v2 1/4] hwmon: (adt7470) Fix some style issues
  • From: Chris Packham
• [PATCH v2 2/4] hwmon: (adt7470) Convert to use regmap
  • From: Chris Packham
• Re: [PATCH v2 07/15] peci: Add peci-aspeed controller driver
  • From: Dan Williams
• Re: [PATCH v2 06/15] peci: Add core infrastructure
  • From: Dan Williams
• Re: [PATCH v2] hwmon: adt7410: fix hwmon sysfs attrs not being created
  • From: Guenter Roeck
• [PATCH] asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
  • From: Jiapeng Chong
• [PATCH v2] hwmon: adt7410: fix hwmon sysfs attrs not being created
  • From: Cosmin Tanislav
• Re: [PATCH 1/2] hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
  • From: Chris Packham
• Re: [PATCH 1/2] hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
  • From: Guenter Roeck
• Re: [PATCH v3] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Guenter Roeck
• Re: [PATCH RESEND] hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_info
  • From: Guenter Roeck
• Re: [PATCH v9 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings
  • From: Rob Herring
• Re: [PATCH v9 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
  • From: Guenter Roeck
• [PATCH v9 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver
  • From: Luka Kovacic
• [PATCH v9 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
  • From: Luka Kovacic
• [PATCH v9 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation
  • From: Luka Kovacic
• [PATCH v9 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
  • From: Luka Kovacic
• [PATCH v9 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
  • From: Luka Kovacic
• [PATCH v9 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
  • From: Luka Kovacic
• [PATCH v9 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings
  • From: Luka Kovacic
• [PATCH v9 0/7] Add support for the IEI WT61P803 PUZZLE MCU
  • From: Luka Kovacic
• [PATCH] hwmon: adt7410: fix hwmon sysfs attrs not being created
  • From: Cosmin Tanislav
• [PATCH v3] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• Re: [PATCH 1/2] dt-bindings: hwmon: merge max1619 into trivial devices
  • From: Rob Herring
• Re: [PATCH 2/2] dt-bindings: hwmon: merge max31785 into trivial devices
  • From: Rob Herring
• [PATCH RESEND] hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_info
  • From: W_Armin
• [PATCH] hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_info
  • From: W_Armin
• Re: [PATCH 1/2] dt-bindings: hwmon: merge max1619 into trivial devices
  • From: Guenter Roeck
• Re: [PATCH 2/2] dt-bindings: hwmon: merge max31785 into trivial devices
  • From: Guenter Roeck
• [PATCH 2/2] dt-bindings: hwmon: merge max31785 into trivial devices
  • From: Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: hwmon: merge max1619 into trivial devices
  • From: Krzysztof Kozlowski
• Re: [PATCH] hwmon: (adt7470) Add support for PWM inversion
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (adt7470) Add support for PWM inversion
  • From: Robert Hancock
• Re: [PATCH] hwmon: (adt7470) Add support for PWM inversion
  • From: Guenter Roeck
• Re: [PATCH] hwmon: remove amd_energy driver in Makefile
  • From: Guenter Roeck
• [PATCH] hwmon: remove amd_energy driver in Makefile
  • From: Lukas Bulwahn
• [PATCH] hwmon: (adt7470) Add support for PWM inversion
  • From: Robert Hancock
• [PATCH i2c-next 4/4] i2c: mlxcpld: Allow flexible polling time setting for I2C transactions
  • From: Vadim Pasternak
• [PATCH i2c-next 3/4] i2c: mlxcpld: Reduce polling time for performance improvement
  • From: Vadim Pasternak
• [PATCH i2c-next 2/4] i2c: mlxcpld: Modify register setting for 400KHz frequency
  • From: Vadim Pasternak
• [PATCH i2c-next 1/4] i2c: mlxcpld: Fix criteria for frequency setting
  • From: Vadim Pasternak
• [PATCH i2c-next 0/4] i2c: mlxcpld: Add fixes and features for transaction polling time setting
  • From: Vadim Pasternak
• [hwmon:hwmon-next] BUILD SUCCESS b51f752c586c2a5b93790896093713e5537f849f
  • From: kernel test robot
• Re: [PATCH RESEND v2] hwmon: (dell-smm) Rework SMM function debugging
  • From: Guenter Roeck
• Re: [PATCH RESEND v2] hwmon: (dell-smm) Rework SMM function debugging
  • From: Pali Rohár
• [PATCH RESEND v2] hwmon: (dell-smm) Rework SMM function debugging
  • From: W_Armin
• [PATCH v2] hwmon: (dell-smm) Rework SMM function debugging
  • From: W_Armin
• Re: [PATCH v2] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Guenter Roeck
• Re: [PATCH 4/4] hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
  • From: Guenter Roeck
• Re: [PATCH 1/4] hwmon: (dell-smm) Mark tables as __initconst
  • From: Guenter Roeck
• Re: [PATCH 2/4] hwmon: (dell-smm) Rework SMM function debugging
  • From: Pali Rohár
• Re: [PATCH 3/4] hwmon: (dell-smm) Enable automatic fan speed control for all channels
  • From: Guenter Roeck
• Re: [PATCH 2/4] hwmon: (dell-smm) Rework SMM function debugging
  • From: Guenter Roeck
• Re: [PATCH 3/4] hwmon: (dell-smm) Enable automatic fan speed control for all channels
  • From: Pali Rohár
• Re: [PATCH 2/4] hwmon: (dell-smm) Rework SMM function debugging
  • From: Pali Rohár
• Re: [PATCH 4/4] hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
  • From: Pali Rohár
• Re: [PATCH 1/4] hwmon: (dell-smm) Mark tables as __initconst
  • From: Pali Rohár
• [PATCH 3/4] hwmon: (dell-smm) Enable automatic fan speed control for all channels
  • From: W_Armin
• [PATCH 2/4] hwmon: (dell-smm) Rework SMM function debugging
  • From: W_Armin
• [PATCH 1/4] hwmon: (dell-smm) Mark tables as __initconst
  • From: W_Armin
• [PATCH 4/4] hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
  • From: W_Armin
• [PATCH 0/4] hwmon: (dell-smm) Misc cleanups
  • From: W_Armin
• RE: [PATCH] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• [hwmon:hwmon-next] BUILD SUCCESS 84fdde0385d41f3e7c4911feaecc119ff70bf570
  • From: kernel test robot
• [PATCH v2] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• Re: [PATCH] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Guenter Roeck
• RE: [PATCH] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• Re: [PATCH net-next v2 1/1] net: phy: nxp-tja11xx: log critical health state
  • From: patchwork-bot+netdevbpf
• Re: [PATCH v2 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Guenter Roeck
• Re: [PATCH v2 1/2] hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits
  • From: Guenter Roeck
• Re: [PATCH 3/3] hwmon: axi-fan-control: support temperature vs pwm points
  • From: Guenter Roeck
• Re: [PATCH 2/3] hwmon: axi-fan-control: handle irqs in natural order
  • From: Guenter Roeck
• Re: [PATCH 1/3] hwmon: axi-fan-control: make sure the clock is enabled
  • From: Guenter Roeck
• Re: [PATCH v2] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
  • From: Guenter Roeck
• Re: [PATCH 0/2] hwmon: (pmbus/bpa-rs600) cleanup and workaround
  • From: Guenter Roeck
• Re: [PATCH 0/2] hwmon: (pmbus/bpa-rs600) cleanup and workaround
  • From: Chris Packham
• [PATCH v2 0/2] hwmon: (pmbus/bpa-rs600) cleanup and workaround
  • From: Chris Packham
• [PATCH v2 1/2] hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits
  • From: Chris Packham
• [PATCH v2 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Chris Packham
• Re: [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Guenter Roeck
• Re: [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Chris Packham
• Re: [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Guenter Roeck
• Re: [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Chris Packham
• Re: [PATCH 1/2] hwmon: (pmbus/bpa-rs600) Remove duplicate defininitions
  • From: Chris Packham
• Re: [PATCH 1/2] hwmon: (pmbus/bpa-rs600) Remove duplicate defininitions
  • From: Guenter Roeck
• Re: [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Guenter Roeck
• Re: hwmon: Error handling in w83793.c, w83791d.c, w83792d.c
  • From: Guenter Roeck
• Re: [PATCH] hwmon: Correct the error handling in w83793.c, w83791d.c, w83792d.c
  • From: Guenter Roeck
• Re: [PATCH v2 04/15] dt-bindings: Add bindings for peci-aspeed
  • From: Rob Herring
• Re: [PATCH v2 03/15] dt-bindings: Add generic bindings for PECI
  • From: Rob Herring
• Re: hwmon: Error handling in w83793.c, w83791d.c, w83792d.c
  • From: Guenter Roeck
• hwmon: Error handling in w83793.c, w83791d.c, w83792d.c
  • From: Nadezda Lutovinova
• [PATCH] hwmon: Correct the error handling in w83793.c, w83791d.c, w83792d.c
  • From: Nadezda Lutovinova
• Re: [PATCH net-next v2 1/1] net: phy: nxp-tja11xx: log critical health state
  • From: Andrew Lunn
• [PATCH 1/3] hwmon: axi-fan-control: make sure the clock is enabled
  • From: Nuno Sá
• [PATCH 3/3] hwmon: axi-fan-control: support temperature vs pwm points
  • From: Nuno Sá
• [PATCH 2/3] hwmon: axi-fan-control: handle irqs in natural order
  • From: Nuno Sá
• [PATCH 0/3] AXI FAN new features and improvements
  • From: Nuno Sá
• [PATCH net-next v2 1/1] net: phy: nxp-tja11xx: log critical health state
  • From: Oleksij Rempel
• [PATCH 1/2] hwmon: (pmbus/bpa-rs600) Remove duplicate defininitions
  • From: Chris Packham
• [PATCH 0/2] hwmon: (pmbus/bpa-rs600) cleanup and workaround
  • From: Chris Packham
• [PATCH 2/2] hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  • From: Chris Packham
• Re: [PATCH net-next v1] net: phy: nxp-tja11xx: log critical health state
  • From: Andrew Lunn
• Re: [PATCH net-next v1] net: phy: nxp-tja11xx: log critical health state
  • From: Guenter Roeck
• Re: [PATCH net-next v1] net: phy: nxp-tja11xx: log critical health state
  • From: Andrew Lunn
• [PATCH net-next v1] net: phy: nxp-tja11xx: log critical health state
  • From: Oleksij Rempel
• [PATCH v2] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
  • From: Brandon Wyman
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
  • From: Brandon Wyman
• Re: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
  • From: Winiarska, Iwona
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Winiarska, Iwona
• Re: [PATCH v2 00/15] Introduce PECI subsystem
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 1/3] mfd: da9063: Add HWMON dependencies
  • From: Lee Jones
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Guenter Roeck
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Zev Weiss
• Re: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
  • From: Guenter Roeck
• Re: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
  • From: Winiarska, Iwona
• Re: [PATCH v2 12/15] hwmon: peci: Add cputemp driver
  • From: Winiarska, Iwona
• [hwmon:hwmon-next] BUILD SUCCESS ae832e297be7d8cc9b4417058d1de57a9af35eff
  • From: kernel test robot
• Re: [PATCH 2/2] hwmon: (w83781d) Match on device tree compatibles
  • From: Guenter Roeck
• Re: [PATCH 1/2] dt-bindings: hwmon: Add bindings for Winbond W83781D
  • From: Guenter Roeck
• Re: [PATCH 1/2] dt-bindings: hwmon: Add bindings for Winbond W83781D
  • From: Rob Herring
• Re: [PATCH 00/38] Replace deprecated CPU-hotplug
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
  • From: Guenter Roeck
• Re: [PATCH 00/38] Replace deprecated CPU-hotplug
  • From: Hans de Goede
• Re: [PATCH 13/38] hwmon: Replace deprecated CPU-hotplug functions.
  • From: Guenter Roeck
• Re: [PATCH v2 12/15] hwmon: peci: Add cputemp driver
  • From: Guenter Roeck
• [PATCH 13/38] hwmon: Replace deprecated CPU-hotplug functions.
  • From: Sebastian Andrzej Siewior
• [PATCH 00/38] Replace deprecated CPU-hotplug
  • From: Sebastian Andrzej Siewior
• [hwmon:watchdog-next] BUILD SUCCESS b3ffffdb86b9d09185ace6a7daaf8c4e8bb61317
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS d3899ec4120c3dfa8d85d5c76221d70c49621d86
  • From: kernel test robot
• [PATCH v2 15/15] docs: Add PECI documentation
  • From: Iwona Winiarska
• [PATCH v2 14/15] docs: hwmon: Document PECI drivers
  • From: Iwona Winiarska
• [PATCH v2 12/15] hwmon: peci: Add cputemp driver
  • From: Iwona Winiarska
• [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
  • From: Iwona Winiarska
• [PATCH v2 11/15] peci: Add peci-cpu driver
  • From: Iwona Winiarska
• [PATCH v2 10/15] peci: Add support for PECI device drivers
  • From: Iwona Winiarska
• [PATCH v2 09/15] peci: Add sysfs interface for PECI bus
  • From: Iwona Winiarska
• [PATCH v2 08/15] peci: Add device detection
  • From: Iwona Winiarska
• [PATCH v2 07/15] peci: Add peci-aspeed controller driver
  • From: Iwona Winiarska
• [PATCH v2 05/15] ARM: dts: aspeed: Add PECI controller nodes
  • From: Iwona Winiarska
• [PATCH v2 06/15] peci: Add core infrastructure
  • From: Iwona Winiarska
• [PATCH v2 04/15] dt-bindings: Add bindings for peci-aspeed
  • From: Iwona Winiarska
• [PATCH v2 03/15] dt-bindings: Add generic bindings for PECI
  • From: Iwona Winiarska
• [PATCH v2 02/15] x86/cpu: Extract cpuid helpers to arch-independent
  • From: Iwona Winiarska
• [PATCH v2 01/15] x86/cpu: Move intel-family to arch-independent headers
  • From: Iwona Winiarska
• [PATCH v2 00/15] Introduce PECI subsystem
  • From: Iwona Winiarska
• Re: [PATCH] hwmon: (dell-smm) Add Dell Precision 7510 to fan control whitelist
  • From: Guenter Roeck
• Re: [PATCH] hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (dell-smm) Add Dell Precision 7510 to fan control whitelist
  • From: Pali Rohar
• [PATCH] hwmon: (dell-smm) Add Dell Precision 7510 to fan control whitelist
  • From: Carlos Alberto Lopez Perez
• Re: [PATCH] hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  • From: Aleksandr Mezin
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Winiarska, Iwona
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Winiarska, Iwona
• RE: [RFC PATCH 0/6] AXI FAN new features and improvements
  • From: Sa, Nuno
• Re: [PATCH v3 0/2] hwmon: Add StarFive JH7100 temperature sensor
  • From: Guenter Roeck
• Re: [PATCH v3 0/2] hwmon: Add StarFive JH7100 temperature sensor
  • From: Emil Renner Berthing
• [hwmon:hwmon-next] BUILD SUCCESS b5fff043a80127ccaff963252a4d25a643a971c3
  • From: kernel test robot
• Re: [PATCH 12/14] hwmon: peci: Add dimmtemp driver
  • From: Winiarska, Iwona
• Re: [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Guenter Roeck
• Re: [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Winiarska, Iwona
• Re: [PATCH 10/14] peci: Add peci-cpu driver
  • From: Winiarska, Iwona
• Re: [PATCH 10/14] peci: Add peci-cpu driver
  • From: Winiarska, Iwona
• Re: [PATCH 09/14] peci: Add support for PECI device drivers
  • From: Winiarska, Iwona
• Re: [PATCH 08/14] peci: Add device detection
  • From: Winiarska, Iwona
• Re: [linux-next:master 3918/4407] drivers/hwmon/sbrmi.c:211:7: warning: variable 'ret' is used uninitialized whenever switch case is taken
  • From: Guenter Roeck
• Re: [PATCH 2/2] hwmon: (w83781d) Match on device tree compatibles
  • From: Guenter Roeck
• [hwmon:hwmon-next] BUILD SUCCESS c35d96845882fa7d1e134049fcda52b294c79c85
  • From: kernel test robot
• Re: [PATCH 09/14] peci: Add support for PECI device drivers
  • From: Zev Weiss
• [PATCH 2/2] hwmon: (w83781d) Match on device tree compatibles
  • From: Linus Walleij
• [PATCH 1/2] dt-bindings: hwmon: Add bindings for Winbond W83781D
  • From: Linus Walleij
• Re: [PATCH 08/14] peci: Add device detection
  • From: Zev Weiss
• Re: [PATCH 09/14] peci: Add support for PECI device drivers
  • From: Winiarska, Iwona
• Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision
  • From: Moritz Fischer
• Re: [PATCH v5 1/3] fpga: dfl: expose feature revision from struct dfl_device
  • From: Moritz Fischer
• Re: [PATCH 08/14] peci: Add device detection
  • From: Winiarska, Iwona
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Zev Weiss
• [hwmon:watchdog-next] BUILD SUCCESS 2b250702df1bea678c2135e5aa309698d59d867c
  • From: kernel test robot
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Winiarska, Iwona
• Re: [PATCH v7 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Pali Rohár
• [hwmon:hwmon] BUILD SUCCESS 03726fd90f4bc4ea309f9bf6faf24960d6d2e986
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 36c4d19d52b01d8dec42d0bb27c03d9f28774462
  • From: kernel test robot
• Re: [PATCH v7 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
  • From: Guenter Roeck
• Re: [PATCH v7 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Armin Wolf
• Re: [PATCH v7 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Guenter Roeck
• [PATCH] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
  • From: Brandon Wyman
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Guenter Roeck
• [PATCH v7 6/6] hwmon: (dell-smm-hwmon) Fix fan mutliplier detection for 3rd fan
  • From: W_Armin
• [PATCH v7 5/6] hwmon: (dell-smm-hwmon) Convert to devm_hwmon_device_register_with_info()
  • From: W_Armin
• [PATCH v7 4/6] hwmon: (dell-smm-hwmon) Move variables into a driver private data structure
  • From: W_Armin
• [PATCH v7 3/6] hwmon: (dell-smm-hwmon) Use devm_add_action_or_reset()
  • From: W_Armin
• [PATCH v7 2/6] hwmon: (dell-smm-hwmon) Mark functions as __init
  • From: W_Armin
• [PATCH v7 1/6] hwmon: (dell-smm-hwmon) Use platform device
  • From: W_Armin
• [PATCH v7 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: W_Armin
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Pali Rohár
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Armin Wolf
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Guenter Roeck
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Armin Wolf
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Guenter Roeck
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Armin Wolf
• Re: [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: Guenter Roeck
• [PATCH v6 5/6] hwmon: (dell-smm-hwmon) Convert to devm_hwmon_device_register_with_info()
  • From: W_Armin
• [PATCH v6 4/6] hwmon: (dell-smm-hwmon) Move variables into a driver private data structure
  • From: W_Armin
• [PATCH v6 6/6] hwmon: (dell-smm-hwmon) Fix fan mutliplier detection for 3rd fan
  • From: W_Armin
• [PATCH v6 3/6] hwmon: (dell-smm-hwmon) Use devm_add_action_or_reset()
  • From: W_Armin
• [PATCH v6 2/6] hwmon: (dell-smm-hwmon) Mark functions as __init
  • From: W_Armin
• [PATCH v6 1/6] hwmon: (dell-smm-hwmon) Use platform device
  • From: W_Armin
• [PATCH v6 0/6] hwmon: (dell-smm-hwmon) Convert to new hwmon registration api
  • From: W_Armin
• Re: [RFC PATCH 0/6] AXI FAN new features and improvements
  • From: Guenter Roeck
• Re: [PATCH v3 0/2] hwmon: Add StarFive JH7100 temperature sensor
  • From: Emil Renner Berthing
• Re: [PATCH v4 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Guenter Roeck
• Re: [PATCH v3 0/2] hwmon: Add StarFive JH7100 temperature sensor
  • From: Guenter Roeck
• Re: [PATCH] hwmon: sht4x: update Documentation for Malformed table
  • From: Guenter Roeck
• Re: [PATCH] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Guenter Roeck
• Re: [PATCH 0/3] for_each_*_bit: move to find.h and reconsider
  • From: Yury Norov
• [PATCH] hwmon: Add Maxim MAX6620 hardware monitoring driver
  • From: Balac, Arun Saravanan
• Re: [RFC][PATCH] hwmon: (pmbus) Support 4th PSU temperature sensor
  • From: Guenter Roeck
• Re: [PATCH] platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
  • From: Thomas Weißschuh
• Re: [PATCH] platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
  • From: Hans de Goede
• Re: [RFC][PATCH] hwmon: (pmbus) Support 4th PSU temperature sensor
  • From: Paul Menzel
• [RFC][PATCH] hwmon: (pmbus) Support 4th PSU temperature sensor
  • From: Paul Menzel
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Guenter Roeck
• [PATCH] hwmon: sht4x: update Documentation for Malformed table
  • From: Randy Dunlap
• Re: [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Zev Weiss
• Re: [PATCH 10/14] peci: Add peci-cpu driver
  • From: Zev Weiss
• Re: [PATCH 09/14] peci: Add support for PECI device drivers
  • From: Guenter Roeck
• Re: [PATCH 09/14] peci: Add support for PECI device drivers
  • From: Zev Weiss
• Re: [PATCH 08/14] peci: Add device detection
  • From: Zev Weiss
• Re: [PATCH 10/14] peci: Add peci-cpu driver
  • From: David Müller (ELSOFT AG)
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Zev Weiss
• Re: [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Zev Weiss
• RE: [RFC PATCH 0/6] AXI FAN new features and improvements
  • From: Sa, Nuno
• [hwmon:watchdog-next] BUILD SUCCESS ac48f3b2773e7725ae9f41a068725ea56882df44
  • From: kernel test robot
• Re: [PATCH v4 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Rob Herring
• Re: [PATCH 12/14] hwmon: peci: Add dimmtemp driver
  • From: Zev Weiss
• [PATCH v3 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor
  • From: Emil Renner Berthing
• [PATCH v3 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings
  • From: Emil Renner Berthing
• [PATCH v3 0/2] hwmon: Add StarFive JH7100 temperature sensor
  • From: Emil Renner Berthing
• [PATCH] platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
  • From: Thomas Weißschuh
• Re: [PATCH 0/5] hwmon: Add driver for MAX6620 Fan controller
  • From: Guenter Roeck
• [PATCH v4 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Naveen Krishna Chatradhi
• [PATCH v4 2/3] hwmon: sbrmi: Add Documentation
  • From: Naveen Krishna Chatradhi
• [PATCH v4 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Naveen Krishna Chatradhi
• RE: [PATCH 0/5] hwmon: Add driver for MAX6620 Fan controller
  • From: Balac, Arun Saravanan
• Re: [PATCH v3 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Guenter Roeck
• RE: [PATCH v3 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Chatradhi, Naveen Krishna
• Re: [PATCH v3 2/3] hwmon: sbrmi: Add Documentation
  • From: Guenter Roeck
• Re: [PATCH v3 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Guenter Roeck
• Re: [PATCH v3 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Guenter Roeck
• Re: [PATCH] hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  • From: Guenter Roeck
• [hwmon:hwmon-next] BUILD SUCCESS 88316b6c34b4bccab3b9d67a9b311b41a0ad2723
  • From: kernel test robot
• [PATCH] hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  • From: Aleksandr Mezin
• Re: [PATCH] hwmon: (w83627ehf) Make DEVICE_ATTR_RO static
  • From: Guenter Roeck
• [PATCH] hwmon: (w83627ehf) Make DEVICE_ATTR_RO static
  • From: W_Armin
• Re: [PATCH 14/54] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Rob Herring
• [hwmon:hwmon-next] BUILD SUCCESS e2c744af9cd3f1949a01a11ca97bd76b455ce3a9
  • From: kernel test robot
• Re: (subset) [PATCH 00/15] Fix some DT binding references at next-20210722
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] hwmon: (w83627ehf) Switch to SIMPLE_DEV_PM_OPS
  • From: Guenter Roeck
• Re: [PATCH 02/15] dt-bindings: firmware: update arm,scpi.yaml reference
  • From: Guenter Roeck
• Re: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Guenter Roeck
• RE: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Sa, Nuno
• Re: [PATCH 02/15] dt-bindings: firmware: update arm,scpi.yaml reference
  • From: Sudeep Holla
• [PATCH 02/15] dt-bindings: firmware: update arm,scpi.yaml reference
  • From: Mauro Carvalho Chehab
• [PATCH 00/15] Fix some DT binding references at next-20210722
  • From: Mauro Carvalho Chehab
• Re: [PATCH 14/54] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Maxime Ripard
• Re: [PATCH 14/54] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Jonathan Cameron
• Re: [PATCH 3/3] fsi: occ: Add dynamic debug to dump command and response
  • From: Jeremy Kerr
• [PATCH v2] hwmon: (w83627ehf) Switch to SIMPLE_DEV_PM_OPS
  • From: W_Armin
• [PATCH v2 3/3] fsi: occ: Add dynamic debug to dump command and response
  • From: Eddie James
• [PATCH v2 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: Eddie James
• [PATCH v2 0/3] OCC: fsi and hwmon: Set sequence number in submit interface
  • From: Eddie James
• [PATCH v2 1/3] fsi: occ: Force sequence numbering per OCC
  • From: Eddie James
• Re: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Guenter Roeck
• [PATCH 14/54] dt-bindings: hwmon: Add IIO HWMON binding
  • From: Maxime Ripard
• Re: [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: Eddie James
• Re: [PATCH 1/3] fsi: occ: Force sequence numbering per OCC
  • From: Eddie James
• Re: [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: Joel Stanley
• Re: [PATCH 1/3] fsi: occ: Force sequence numbering per OCC
  • From: Joel Stanley
• [hwmon:master] BUILD SUCCESS 51f2e83fd62623a04d2a327bfd4d2a9bc131f142
  • From: kernel test robot
• [PATCH v3 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Naveen Krishna Chatradhi
• [PATCH v3 2/3] hwmon: sbrmi: Add Documentation
  • From: Naveen Krishna Chatradhi
• [PATCH v3 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Naveen Krishna Chatradhi
• Re: [PATCH 12/14] hwmon: peci: Add dimmtemp driver
  • From: Winiarska, Iwona
• Re: [PATCH 12/14] hwmon: peci: Add dimmtemp driver
  • From: Guenter Roeck
• Re: [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Winiarska, Iwona
• Re: [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Guenter Roeck
• Re: [PATCH v2 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Guenter Roeck
• RE: [PATCH v2 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Chatradhi, Naveen Krishna
• RE: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Sa, Nuno
• RE: [RFC PATCH 1/6] hwmon: axi-fan-control: make sure the clock is enabled
  • From: Sa, Nuno
• RE: [RFC PATCH 6/6] hwmon: axi-fan-control: support temperature vs pwm points
  • From: Sa, Nuno
• Re: [PATCH 3/3] fsi: occ: Add dynamic debug to dump command and response
  • From: kernel test robot
• Re: [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: kernel test robot
• Re: [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: kernel test robot
• [hwmon:hwmon-next] BUILD SUCCESS 47f53972ca1553c9ef6d6e422a0ab61824bbcb40
  • From: kernel test robot
• Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision
  • From: Moritz Fischer
• Re: [PATCH 06/14] peci: Add core infrastructure
  • From: Dan Williams
• Re: [RFC PATCH 1/6] hwmon: axi-fan-control: make sure the clock is enabled
  • From: Guenter Roeck
• Re: [RFC PATCH 6/6] hwmon: axi-fan-control: support temperature vs pwm points
  • From: Guenter Roeck
• Re: [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: Guenter Roeck
• Re: [PATCH v5 3/3] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Guenter Roeck
• Re: [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
  • From: Quan Nguyen
• Re: [PATCH 06/14] peci: Add core infrastructure
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 06/14] peci: Add core infrastructure
  • From: Dan Williams
• Re: [PATCH 04/14] dt-bindings: Add bindings for peci-aspeed
  • From: Winiarska, Iwona
• Re: [PATCH 08/14] peci: Add device detection
  • From: Winiarska, Iwona
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Winiarska, Iwona
• Re: [PATCH 06/14] peci: Add core infrastructure
  • From: Winiarska, Iwona
• Re: [PATCH v5 1/3] fpga: dfl: expose feature revision from struct dfl_device
  • From: Tom Rix
• Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision
  • From: Tom Rix
• Re: [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
  • From: Rob Herring
• Re: [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision
  • From: Mark Brown
• [PATCH 0/3] OCC: fsi and hwmon: Set sequence number in submit interface
  • From: Eddie James
• [PATCH 3/3] fsi: occ: Add dynamic debug to dump command and response
  • From: Eddie James
• [PATCH 2/3] hwmon: (occ) Remove sequence numbering and checksum calculation
  • From: Eddie James
• [PATCH 1/3] fsi: occ: Force sequence numbering per OCC
  • From: Eddie James
• Re: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Guenter Roeck
• [PATCH v5 3/3] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Martin Hundebøll
• [PATCH v5 2/3] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• [PATCH v5 1/3] fpga: dfl: expose feature revision from struct dfl_device
  • From: Martin Hundebøll
• [PATCH v5 0/3] fpga/spi/hwmon: Initial support for Silicom N5010 PAC
  • From: Martin Hundebøll
• Re: [PATCH] hwmon: nct6775: Add missing voltage reading NCT6796D
  • From: Henk
• Re: [PATCH v3 3/4] mfd: intel-m10-bmc: add n5010 variant
  • From: Lee Jones
• RE: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Sa, Nuno
• Re: [PATCH v2 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Guenter Roeck
• Re: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Guenter Roeck
• Re: [PATCH 00/14] Introduce PECI subsystem
  • From: Dan Williams
• RE: [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers
  • From: Luck, Tony
• Re: [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers
  • From: Dan Williams
• Re: [PATCH 12/14] hwmon: peci: Add dimmtemp driver
  • From: Guenter Roeck
• Re: [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Guenter Roeck
• Re: [PATCH 00/14] Introduce PECI subsystem
  • From: Winiarska, Iwona
• Re: [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent
  • From: Winiarska, Iwona
• Re: [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent
  • From: Winiarska, Iwona
• Re: [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers
  • From: Winiarska, Iwona
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Winiarska, Iwona
• Re: [PATCH 04/14] dt-bindings: Add bindings for peci-aspeed
  • From: Rob Herring
• RE: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Sa, Nuno
• Re: [PATCH 08/14] peci: Add device detection
  • From: Williams, Dan J
• Re: [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings
  • From: Esmil
• Re: [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings
  • From: Rob Herring
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Williams, Dan J
• Re: [PATCH 06/14] peci: Add core infrastructure
  • From: Williams, Dan J
• Re: [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent
  • From: Williams, Dan J
• Re: [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers
  • From: Williams, Dan J
• Re: [PATCH 00/14] Introduce PECI subsystem
  • From: Williams, Dan J
• Re: [PATCH v2] dt-bindings: hwmon: Convert NTC thermistor to YAML
  • From: Linus Walleij
• Re: [PATCH] hwmon: nct6775: Add missing voltage reading NCT6796D
  • From: Guenter Roeck
• Re: [PATCH v4 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: Tom Rix
• Re: [PATCH] hwmon: nct6775: Add missing voltage reading NCT6796D
  • From: Henk
• Re: [PATCH v4 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• Re: [PATCH v4 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Tom Rix
• Re: [PATCH v4 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• Re: [PATCH] dt-bindings: Move fixed string 'patternProperties' to 'properties'
  • From: Mark Brown
• Re: [PATCH v4 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: Martin Hundebøll
• Re: [PATCH] hwmon: nct6775: Add missing voltage reading NCT6796D
  • From: Guenter Roeck
• Re: [PATCH] hwmon: nct6775: Add missing voltage reading NCT6796D
  • From: Henk
• Re: [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver
  • From: Quan Nguyen
• Re: [PATCH] dt-bindings: Move fixed string 'patternProperties' to 'properties'
  • From: Guenter Roeck
• [PATCH] dt-bindings: Move fixed string 'patternProperties' to 'properties'
  • From: Rob Herring
• Re: [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver
  • From: Guenter Roeck
• Re: [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver
  • From: Quan Nguyen
• Re: [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver
  • From: Guenter Roeck
• [PATCH v5 4/4] docs: hwmon: (smpro-hwmon) Add documentation
  • From: Quan Nguyen
• [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver
  • From: Quan Nguyen
• [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver
  • From: Quan Nguyen
• [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
  • From: Quan Nguyen
• [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver
  • From: Quan Nguyen
• Re: [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Randy Dunlap
• [PATCH 14/14] docs: Add PECI documentation
  • From: Iwona Winiarska
• [PATCH 13/14] docs: hwmon: Document PECI drivers
  • From: Iwona Winiarska
• [PATCH 12/14] hwmon: peci: Add dimmtemp driver
  • From: Iwona Winiarska
• [PATCH 11/14] hwmon: peci: Add cputemp driver
  • From: Iwona Winiarska
• [PATCH 10/14] peci: Add peci-cpu driver
  • From: Iwona Winiarska
• [PATCH 09/14] peci: Add support for PECI device drivers
  • From: Iwona Winiarska
• [PATCH 08/14] peci: Add device detection
  • From: Iwona Winiarska
• [PATCH 07/14] peci: Add peci-aspeed controller driver
  • From: Iwona Winiarska
• [PATCH 06/14] peci: Add core infrastructure
  • From: Iwona Winiarska
• [PATCH 05/14] ARM: dts: aspeed: Add PECI controller nodes
  • From: Iwona Winiarska
• [PATCH 04/14] dt-bindings: Add bindings for peci-aspeed
  • From: Iwona Winiarska
• [PATCH 03/14] dt-bindings: Add generic bindings for PECI
  • From: Iwona Winiarska
• [PATCH 02/14] x86/cpu: Extract cpuid helpers to arch-independent
  • From: Iwona Winiarska
• [PATCH 01/14] x86/cpu: Move intel-family to arch-independent headers
  • From: Iwona Winiarska
• [PATCH 00/14] Introduce PECI subsystem
  • From: Iwona Winiarska
• Re: [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Rob Herring
• Re: [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings
  • From: Rob Herring
• Re: [PATCH v2] dt-bindings: hwmon: Convert NTC thermistor to YAML
  • From: Rob Herring
• [hwmon:hwmon-next] BUILD SUCCESS 3352a33e7f9c9b41e7f19b7386ce6e1cb2b7d77d
  • From: kernel test robot
• Re: [PATCH 3/3] hwmon: (w83627ehf) Switch to SIMPLE_DEV_PM_OPS
  • From: Armin Wolf
• [hwmon:watchdog-next] BUILD SUCCESS 00962bee9671c7bafb3d8c52c5b30a90449e33ba
  • From: kernel test robot
• [PATCH 5.10 250/593] hwmon: (lm70) Use device_get_match_data()
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/3] hwmon: (w83627ehf) Switch to SIMPLE_DEV_PM_OPS
  • From: Guenter Roeck
• [hwmon:hwmon-next 7/7] drivers/hwmon/w83627ehf.c:1954:6: error: 'struct w83627ehf_data' has no member named 'vbat'
  • From: kernel test robot
• [hwmon:hwmon-next 7/7] drivers/hwmon/w83627ehf.c:1954:6: error: 'struct w83627ehf_data' has no member named 'vbat'
  • From: kernel test robot
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Randy Dunlap
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• Re: [PATCH v3 3/3] Documentation: hwmon: New information for DA9063
  • From: Guenter Roeck
• Re: [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH 0/3] hwmon: (w83627ehf) Cleanups
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (pmbus/bpa-rs600): Support BPD-RS600
  • From: Guenter Roeck
• [PATCH 3/3] hwmon: (w83627ehf) Switch to SIMPLE_DEV_PM_OPS
  • From: W_Armin
• [PATCH 2/3] hwmon: (w83627ehf) Remove w83627ehf_remove()
  • From: W_Armin
• [PATCH 1/3] hwmon: (w83627ehf) Use platform_create_bundle
  • From: W_Armin
• [PATCH 0/3] hwmon: (w83627ehf) Cleanups
  • From: W_Armin
• [PATCH] hwmon: (pmbus/bpa-rs600): Support BPD-RS600
  • From: Chris Packham
• [PATCH 07/13] mailbox: pcc: Use PCC mailbox channel pointer instead of standard
  • From: Sudeep Holla
• [RFC PATCH 5/6] hwmon: axi-fan-control: clear the fan fault irq at startup
  • From: Nuno Sá
• [RFC PATCH 0/6] AXI FAN new features and improvements
  • From: Nuno Sá
• [RFC PATCH 6/6] hwmon: axi-fan-control: support temperature vs pwm points
  • From: Nuno Sá
• [RFC PATCH 4/6] hwmon: axi-fan-control: handle irqs in natural order
  • From: Nuno Sá
• [RFC PATCH 3/6] dt-bindings: axi-fan-control: add tacho properties
  • From: Nuno Sá
• [RFC PATCH 2/6] hwmon: axi-fan-control: add tacho devicetree properties
  • From: Nuno Sá
• [RFC PATCH 1/6] hwmon: axi-fan-control: make sure the clock is enabled
  • From: Nuno Sá
• Fwd: [PATCH] hwmon: nct6775: Add missing voltage reading NCT6796D
  • From: Henk
• Re: [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• [PATCH v2 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Naveen Krishna Chatradhi
• [PATCH v2 2/3] hwmon: sbrmi: Add Documentation
  • From: Naveen Krishna Chatradhi
• [PATCH v2 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Naveen Krishna Chatradhi
• RE: [PATCH 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Chatradhi, Naveen Krishna
• Re: [PATCH 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Guenter Roeck
• RE: [PATCH 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Chatradhi, Naveen Krishna
• [PATCH v3 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• [PATCH v3 1/3] mfd: da9063: Add HWMON dependencies
  • From: Vincent Pelletier
• [PATCH v3 3/3] Documentation: hwmon: New information for DA9063
  • From: Vincent Pelletier
• Re: [PATCH v3]: hwmon: nct6775: Fix some issues with NCT6796D
  • From: Guenter Roeck
• [PATCH v3]: hwmon: nct6775: Fix some issues with NCT6796D
  • From: Henk
• Re: PATCH: HWMON: (nct6775) Correct number of inputs on NCT6796D
  • From: Guenter Roeck
• PATCH: HWMON: (nct6775) Correct number of inputs on NCT6796D
  • From: Henk
• Re: [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• Re: [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH 3/3] Documentation: hwmon: New information for DA9063
  • From: Guenter Roeck
• Re: [PATCH 1/3] mfd: da9063: Add HWMON dependencies
  • From: Guenter Roeck
• Re: [PATCH v4 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Tom Rix
• [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• [PATCH 3/3] Documentation: hwmon: New information for DA9063
  • From: Vincent Pelletier
• [PATCH 1/3] mfd: da9063: Add HWMON dependencies
  • From: Vincent Pelletier
• Re: [PATCH v4 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: Tom Rix
• Re: [PATCH 0/5] hwmon: Add driver for MAX6620 Fan controller
  • From: Guenter Roeck
• [PATCH 5/5] hwmon: Update MAX6620 driver as per linux code guidelines
  • From: Balac, Arun Saravanan
• [PATCH 3/5] hwmon: Update MAX6620 driver to support newer kernel
  • From: Balac, Arun Saravanan
• [PATCH 4/5] hwmon: Add attributes in MAX6620 driver to retrieve fan fault status
  • From: Balac, Arun Saravanan
• [PATCH 2/5] hwmon: MAX6620 fix rpm calculation accuracy
  • From: Balac, Arun Saravanan
• [PATCH 1/5] hwmon: Driver for MAX6620 Fan sensor
  • From: Balac, Arun Saravanan
• [PATCH 0/5] hwmon: Add driver for MAX6620 Fan controller
  • From: Balac, Arun Saravanan
• [hwmon:master] BUILD SUCCESS af9efb8b661e98ec48abe85c22f4f7fb667f5195
  • From: kernel test robot
• Re: [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Guenter Roeck
• Re: [PATCH 3/3] Documentation: hwmon: New information for DA9063
  • From: Guenter Roeck
• [PATCH 3/3] Documentation: hwmon: New information for DA9063
  • From: Vincent Pelletier
• [PATCH 2/3] hwmon: da9063: HWMON driver
  • From: Vincent Pelletier
• [PATCH 1/3] mfd: da9063: Add HWMON dependencies
  • From: Vincent Pelletier
• Re: [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
  • From: kernel test robot
• Re: [PATCH v2] hwmon: (ntc_thermistor): Use library interpolation
  • From: Guenter Roeck
• Re: [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
  • From: Guenter Roeck
• Re: [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
  • From: Guenter Roeck
• Re: HWMON: (nct6775) Correct number of inputs on NCT6796D
  • From: Guenter Roeck
• [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
  • From: Pavo Banicevic
• [PATCH v8 7/7] MAINTAINERS: Add an entry for the IEI WT61P803 PUZZLE driver
  • From: Pavo Banicevic
• [PATCH v8 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation
  • From: Pavo Banicevic
• [PATCH v8 4/7] drivers: leds: Add the IEI WT61P803 PUZZLE LED driver
  • From: Pavo Banicevic
• [PATCH v8 3/7] drivers: hwmon: Add the IEI WT61P803 PUZZLE HWMON driver
  • From: Pavo Banicevic
• [PATCH v8 2/7] drivers: mfd: Add a driver for IEI WT61P803 PUZZLE MCU
  • From: Pavo Banicevic
• [PATCH v8 1/7] dt-bindings: Add IEI vendor prefix and IEI WT61P803 PUZZLE driver bindings
  • From: Pavo Banicevic
• [PATCH v8 0/7] Add support for the IEI WT61P803 PUZZLE MCU
  • From: Pavo Banicevic
• HWMON: (nct6775) Correct number of inputs on NCT6796D
  • From: Henk
• [PATCH v4 4/4] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Martin Hundebøll
• [PATCH v4 3/4] mfd: intel-m10-bmc: add n5010 variant
  • From: Martin Hundebøll
• [PATCH v4 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• [PATCH v4 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: Martin Hundebøll
• [PATCH v4 0/4] fpga/mfd/hwmon: Initial support for Silicom N5010 PAC
  • From: Martin Hundebøll
• [PATCH AUTOSEL 5.10 55/70] hwmon: (max31790) Fix pwmX_enable attributes
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 37/50] hwmon: (max31790) Fix pwmX_enable attributes
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 36/50] hwmon: (max31790) Report correct current pwm duty cycles
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 54/70] hwmon: (max31790) Report correct current pwm duty cycles
  • From: Sasha Levin
• [PATCH AUTOSEL 5.12 60/80] hwmon: (max31790) Report correct current pwm duty cycles
  • From: Sasha Levin
• [PATCH AUTOSEL 5.12 61/80] hwmon: (max31790) Fix pwmX_enable attributes
  • From: Sasha Levin
• [PATCH AUTOSEL 5.13 64/85] hwmon: (max31790) Fix pwmX_enable attributes
  • From: Sasha Levin
• [PATCH AUTOSEL 5.13 63/85] hwmon: (max31790) Report correct current pwm duty cycles
  • From: Sasha Levin
• [PATCH v2] hwmon: (ntc_thermistor): Use library interpolation
  • From: Linus Walleij
• Re: [PATCH] hwmon: (ntc_thermistor): Use library interpolation
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (ntc_thermistor): Use library interpolation
  • From: Jonathan Cameron
• [PATCH] hwmon: (ntc_thermistor): Use library interpolation
  • From: Linus Walleij
• [PATCH v2] dt-bindings: hwmon: Convert NTC thermistor to YAML
  • From: Linus Walleij
• [PATCH] dt-bindings: hwmon: Convert NTC thermistor to YAML
  • From: Linus Walleij
• Re: [PATCH v6 1/2] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Guenter Roeck
• Re: [PATCH v6 2/2] hwmon: (pmbus) Try use read_status() to read status register
  • From: Guenter Roeck
• [PATCH v6 2/2] hwmon: (pmbus) Try use read_status() to read status register
  • From: ainux . wang
• [PATCH v6 1/2] hwmon: (pmbus) Add support for MPS MP2949A
  • From: ainux . wang
• [PATCH v6 0/2] hwmon: (pmbus) Add support for MPS MP2949A
  • From: ainux . wang
• Re: [PATCH v3 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Moritz Fischer
• Re: [PATCH v3 3/4] mfd: intel-m10-bmc: add n5010 variant
  • From: matthew . gerlach
• Re: [PATCH v2 4/5] mfd: intel-m10-bmc: add n5010 variant
  • From: Lee Jones
• RE: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: matthew . gerlach
• Re: [PATCH v3 4/4] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: matthew . gerlach
• Re: [PATCH v3 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: matthew . gerlach
• RE: [PATCH 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Chatradhi, Naveen Krishna
• RE: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: Wu, Hao
• RE: [PATCH v3 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: Wu, Hao
• Re: [PATCH] hwmon: (aspeed-pwm-tacho) Using falling edge.
  • From: Guenter Roeck
• [PATCH v3 4/4] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Martin Hundebøll
• [PATCH v3 3/4] mfd: intel-m10-bmc: add n5010 variant
  • From: Martin Hundebøll
• [PATCH v3 1/4] fpga: dfl: expose feature revision from struct dfl_device
  • From: Martin Hundebøll
• [PATCH v3 2/4] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• [PATCH v3 0/4] fpga/mfd/hwmon: Initial support for Silicom N5010 PAC
  • From: Martin Hundebøll
• Re: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• Re: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: Mark Brown
• Re: [PATCH] hwmon: (aspeed-pwm-tacho) Using falling edge.
  • From: Billy Tsai
• [hwmon:watchdog-next] BUILD SUCCESS 4085a54cef04dbc121b0af7cd06f79df9c9f6a44
  • From: kernel test robot
• Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Ainux Wang
• Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Guenter Roeck
• Re: [PATCH v2 5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Xu Yilun
• Re: [PATCH v2 4/5] mfd: intel-m10-bmc: add n5010 variant
  • From: Xu Yilun
• Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Ainux Wang
• Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Ainux Wang
• Re: [GIT PULL] hwmon updates for v5.14
  • From: pr-tracker-bot
• Re: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: Moritz Fischer
• Re: [PATCH v2 5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Moritz Fischer
• Re: [PATCH v2 5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Guenter Roeck
• Re: [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor
  • From: Guenter Roeck
• Re: [PATCH 2/3] hwmon: sbrmi: Add Documentation
  • From: Guenter Roeck
• Re: [PATCH 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Guenter Roeck
• Re: [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor
  • From: Esmil
• Re: [PATCH v2 5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (aspeed-pwm-tacho) Using falling edge.
  • From: Guenter Roeck
• Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Guenter Roeck
• [GIT PULL] hwmon updates for v5.14
  • From: Guenter Roeck
• Re: [PATCH v2 4/5] mfd: intel-m10-bmc: add n5010 variant
  • From: Lee Jones
• Re: [PATCH v2 5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Xu Yilun
• Re: [PATCH v2 4/5] mfd: intel-m10-bmc: add n5010 variant
  • From: Xu Yilun
• Re: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: Xu Yilun
• RE: [PATCH v2 2/5] fpga: dfl: expose feature revision from struct dfl_device
  • From: Wu, Hao
• Re: [PATCH 2/3] find: micro-optimize for_each_{set,clear}_bit()
  • From: Yury Norov
• Re: [PATCH v2 2/5] fpga: dfl: expose feature revision from struct dfl_device
  • From: Moritz Fischer
• Re: [PATCH v2 4/5] mfd: intel-m10-bmc: add n5010 variant
  • From: Moritz Fischer
• Re: [PATCH v2 1/5] fpga: dfl: pci: add device IDs for Silicom N501x PAC cards
  • From: Moritz Fischer
• [PATCH 3/3] dt-bindings: sbrmi: Add SB-RMI hwmon driver bindings
  • From: Naveen Krishna Chatradhi
• [PATCH 2/3] hwmon: sbrmi: Add Documentation
  • From: Naveen Krishna Chatradhi
• [PATCH 1/3] hwmon: sbrmi: Add support for sbrmi power module
  • From: Naveen Krishna Chatradhi
• [PATCH v2 5/5] hwmon: intel-m10-bmc-hwmon: add n5010 sensors
  • From: Martin Hundebøll
• [PATCH v2 4/5] mfd: intel-m10-bmc: add n5010 variant
  • From: Martin Hundebøll
• [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
  • From: Martin Hundebøll
• [PATCH v2 2/5] fpga: dfl: expose feature revision from struct dfl_device
  • From: Martin Hundebøll
• [PATCH v2 1/5] fpga: dfl: pci: add device IDs for Silicom N501x PAC cards
  • From: Martin Hundebøll
• [PATCH v2 0/5] fpga/mfd/hwmon: Initial support for Silicom N5010 PAC
  • From: Martin Hundebøll
• Re: [PATCH 0/4] fpga/mfd/hwmon: Initial support for Silicom N5010 PAC
  • From: Martin Hundebøll
• Re: [PATCH] hwmon: (aspeed-pwm-tacho) Using falling edge.
  • From: Billy Tsai
• [hwmon:hwmon-next] BUILD SUCCESS a5f6c0f85a09f46c88c0ac53f3d2f70eef105a65
  • From: kernel test robot
• [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor
  • From: Emil Renner Berthing
• [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings
  • From: Emil Renner Berthing
• [PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor
  • From: Emil Renner Berthing
• Re: [PATCH v5 2/2] hwmon: Support set_trips() of thermal device ops
  • From: Guenter Roeck
• Re: [PATCH v5 1/2] hwmon: (lm90) Prevent integer underflows of temperature calculations
  • From: Guenter Roeck
• Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A
  • From: Guenter Roeck
• Re: [PATCH] hwmon: (aspeed-pwm-tacho) Using falling edge.
  • From: Guenter Roeck
• Re: [RFC] hwmon: (pmbus) Some questions about PMBUS_STATUS
  • From: Guenter Roeck
• RE: [PATCH 2/4] fpga: dfl: Move DFH header register macros to linux/dfl.h
  • From: Wu, Hao
• [PATCH] hwmon: (aspeed-pwm-tacho) Using falling edge.
  • From: Billy Tsai
• Re: [PATCH 2/4] fpga: dfl: Move DFH header register macros to linux/dfl.h
  • From: Xu Yilun
• [RFC] hwmon: (pmbus) Some questions about PMBUS_STATUS
  • From: ainux . wang
• [PATCH v5 5/6] hwmon: (dell-smm-hwmon) Convert to devm_hwmon_device_register_with_info()
  • From: W_Armin
• [PATCH v5 4/6] hwmon: (dell-smm-hwmon) Move variables into a driver private data structure
  • From: W_Armin
• [PATCH v5 3/6] hwmon: (dell-smm-hwmon) Use devm_add_action_or_reset()
  • From: W_Armin
• [PATCH v5 2/6] hwmon: (dell-smm-hwmon) Mark functions as __init
  • From: W_Armin
• [PATCH v5 1/6] hwmon: (dell-smm-hwmon) Use platform device
  • From: W_Armin