The only possible assignment of a function to get a voltage to
convert to a resistance is to use the internal function
ntc_adc_iio_read() which is only available when using IIO
and OF.
Bite the bullet and mandate OF and IIO, drop the read_uv()
callback abstraction and some ifdefs.
As no board is using the platform data, all users are using
OF and IIO anyway.
Cc: Peter Rosin <peda@xxxxxxxxxx>
Cc: Chris Lesiak <chris.lesiak@xxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/hwmon/Kconfig | 5 ++--
drivers/hwmon/ntc_thermistor.c | 49 +++++++++-------------------------
2 files changed, 16 insertions(+), 38 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 64bd3dfba2c4..e491e8f354bb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1414,8 +1414,9 @@ config SENSORS_PC87427
will be called pc87427.
config SENSORS_NTC_THERMISTOR
- tristate "NTC thermistor support from Murata"
- depends on !OF || IIO=n || IIO
+ tristate "NTC thermistor support"
+ depends on OF
+ depends on IIO
depends on THERMAL || !THERMAL_OF
help
This driver supports NTC thermistors sensor reading and its
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 8a78e899fa12..cedb3ee0f762 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -28,8 +28,7 @@ enum ntc_thermistor_type {
struct ntc_thermistor_platform_data {
/*
- * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use
- * read_uV()
+ * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required.
*
* How to setup pullup_ohm, pulldown_ohm, and connect is
* described at Documentation/hwmon/ntc_thermistor.rst
@@ -39,9 +38,7 @@ struct ntc_thermistor_platform_data {
* chan: iio_channel pointer to communicate with the ADC which the
* thermistor is using for conversion of the analog values.
*/
- int (*read_uv)(struct ntc_thermistor_platform_data *);
unsigned int pullup_uv;
-
unsigned int pullup_ohm;
unsigned int pulldown_ohm;
enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
@@ -346,7 +343,6 @@ struct ntc_data {
int n_comp;
};
-#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO)
static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
{
struct iio_channel *channel = pdata->chan;
@@ -451,20 +447,9 @@ ntc_thermistor_parse_dt(struct device *dev)
pdata->connect = NTC_CONNECTED_GROUND;
pdata->chan = chan;
- pdata->read_uv = ntc_adc_iio_read;
return pdata;
}
-#else
-static struct ntc_thermistor_platform_data *
-ntc_thermistor_parse_dt(struct device *dev)
-{
- return NULL;
-}
-
-#define ntc_match NULL
-
-#endif
static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
{
@@ -594,13 +579,10 @@ static int ntc_thermistor_get_ohm(struct ntc_data *data)
{
int read_uv;
- if (data->pdata->read_uv) {
- read_uv = data->pdata->read_uv(data->pdata);
- if (read_uv < 0)
- return read_uv;
- return get_ohm_of_thermistor(data, read_uv);
- }
- return -EINVAL;
+ read_uv = ntc_adc_iio_read(data->pdata);
+ if (read_uv < 0)
+ return read_uv;
+ return get_ohm_of_thermistor(data, read_uv);
}
static int ntc_read(struct device *dev, enum hwmon_sensor_types type,
@@ -681,19 +663,14 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
return -ENODEV;
}
- if (!pdata->read_uv) {
- dev_err(dev, "read_uv missing\n");
- return -EINVAL;
- }
-
- if (pdata->read_uv && (pdata->pullup_uv == 0 ||
- (pdata->pullup_ohm == 0 && pdata->connect ==
- NTC_CONNECTED_GROUND) ||
- (pdata->pulldown_ohm == 0 && pdata->connect ==
- NTC_CONNECTED_POSITIVE) ||
- (pdata->connect != NTC_CONNECTED_POSITIVE &&
- pdata->connect != NTC_CONNECTED_GROUND))) {
- dev_err(dev, "Required data to use read_uv not supplied.\n");
+ if (pdata->pullup_uv == 0 ||
+ (pdata->pullup_ohm == 0 && pdata->connect ==
+ NTC_CONNECTED_GROUND) ||
+ (pdata->pulldown_ohm == 0 && pdata->connect ==
+ NTC_CONNECTED_POSITIVE) ||
+ (pdata->connect != NTC_CONNECTED_POSITIVE &&
+ pdata->connect != NTC_CONNECTED_GROUND)) {
+ dev_err(dev, "Required data to use NTC driver not supplied.\n");
return -EINVAL;
}
--
2.31.1
