On Sun, Dec 19, 2021 at 01:22:39PM +0300, Arseny Demidov wrote:
> In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
> the correct value should be 0x100. The register ip_tmr is expressed
> in units of IP clk cycles, in accordance with the datasheet.
> Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
>
> Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
> Signed-off-by: Arseny Demidov <a.demidov@xxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/mr75203.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
> index 868243dba1ee..1ba1e3145969 100644
> --- a/drivers/hwmon/mr75203.c
> +++ b/drivers/hwmon/mr75203.c
> @@ -93,7 +93,7 @@
> #define VM_CH_REQ BIT(21)
>
> #define IP_TMR 0x05
> -#define POWER_DELAY_CYCLE_256 0x80
> +#define POWER_DELAY_CYCLE_256 0x100
> #define POWER_DELAY_CYCLE_64 0x40
>
> #define PVT_POLL_DELAY_US 20
