The difference between TMP431 and other chips of this series is that the
TMP431 has an additional sensor. The register addresses for other sensors
are the same for all chips. It is therefore unnecessary to maintain two
different arrays for TMP431 and the other chips. Just use the same array
for all chips and add the TMP431 register addresses as third column.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/tmp401.c | 39 +++++++++++----------------------------
1 file changed, 11 insertions(+), 28 deletions(-)
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index b31f4964f852..29c857a76c9e 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -49,36 +49,22 @@ enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
#define TMP401_MANUFACTURER_ID_REG 0xFE
#define TMP401_DEVICE_ID_REG 0xFF
-static const u8 TMP401_TEMP_MSB_READ[7][2] = {
- { 0x00, 0x01 }, /* temp */
- { 0x06, 0x08 }, /* low limit */
- { 0x05, 0x07 }, /* high limit */
- { 0x20, 0x19 }, /* therm (crit) limit */
- { 0x30, 0x34 }, /* lowest */
- { 0x32, 0x36 }, /* highest */
-};
-
-static const u8 TMP401_TEMP_MSB_WRITE[7][2] = {
- { 0, 0 }, /* temp (unused) */
- { 0x0C, 0x0E }, /* low limit */
- { 0x0B, 0x0D }, /* high limit */
- { 0x20, 0x19 }, /* therm (crit) limit */
- { 0x30, 0x34 }, /* lowest */
- { 0x32, 0x36 }, /* highest */
-};
-
-static const u8 TMP432_TEMP_MSB_READ[4][3] = {
+static const u8 TMP401_TEMP_MSB_READ[7][3] = {
{ 0x00, 0x01, 0x23 }, /* temp */
{ 0x06, 0x08, 0x16 }, /* low limit */
{ 0x05, 0x07, 0x15 }, /* high limit */
- { 0x20, 0x19, 0x1A }, /* therm (crit) limit */
+ { 0x20, 0x19, 0x1a }, /* therm (crit) limit */
+ { 0x30, 0x34, 0x00 }, /* lowest */
+ { 0x32, 0x36, 0x00 }, /* highest */
};
-static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
- { 0, 0, 0 }, /* temp - unused */
+static const u8 TMP401_TEMP_MSB_WRITE[7][3] = {
+ { 0x00, 0x00, 0x00 }, /* temp (unused) */
{ 0x0C, 0x0E, 0x16 }, /* low limit */
{ 0x0B, 0x0D, 0x15 }, /* high limit */
- { 0x20, 0x19, 0x1A }, /* therm (crit) limit */
+ { 0x20, 0x19, 0x1a }, /* therm (crit) limit */
+ { 0x30, 0x34, 0x00 }, /* lowest */
+ { 0x32, 0x36, 0x00 }, /* highest */
};
/* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
@@ -182,9 +168,7 @@ static int tmp401_update_device_reg16(struct i2c_client *client,
for (j = 0; j < num_regs; j++) { /* temp / low / ... */
u8 regaddr;
- regaddr = data->kind == tmp432 ?
- TMP432_TEMP_MSB_READ[j][i] :
- TMP401_TEMP_MSB_READ[j][i];
+ regaddr = TMP401_TEMP_MSB_READ[j][i];
if (j == 3) { /* crit is msb only */
val = i2c_smbus_read_byte_data(client, regaddr);
} else {
@@ -336,8 +320,7 @@ static ssize_t temp_store(struct device *dev,
mutex_lock(&data->update_lock);
- regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
- : TMP401_TEMP_MSB_WRITE[nr][index];
+ regaddr = TMP401_TEMP_MSB_WRITE[nr][index];
if (nr == 3) { /* crit is msb only */
i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
} else {
--
2.33.0
