Linux Bluetooth Wireless

• Date Index

• Re: [PATCH] net/socket: Ensure length of input socket option param >= sizeof(int), (continued)
  • Re: [PATCH] net/socket: Ensure length of input socket option param >= sizeof(int), Eric Dumazet
    • Re: [PATCH] net/socket: Ensure length of input socket option param >= sizeof(int), Luiz Augusto von Dentz
    • [PATCH] Bluetooth: fix oob in rfcomm_sock_setsockopt, Edward Adam Davis
      • Re: [PATCH] Bluetooth: fix oob in rfcomm_sock_setsockopt, Luiz Augusto von Dentz
      • RE: Bluetooth: fix oob in rfcomm_sock_setsockopt, bluez . test . bot
    • Re: [PATCH] net/socket: Ensure length of input socket option param >= sizeof(int), Edward Adam Davis
      • Re: [PATCH] net/socket: Ensure length of input socket option param >= sizeof(int), Eric Dumazet
      • Re: [PATCH] net/socket: Ensure length of input socket option param >= sizeof(int), Jakub Kicinski
  • RE: net/socket: Ensure length of input socket option param >= sizeof(int), bluez . test . bot
  • Re: [PATCH] net/socket: the length value of the input socket option parameter is too small, Eric Dumazet
• [syzbot] [bluetooth?] KASAN: slab-out-of-bounds Read in l2cap_sock_setsockopt, syzbot
• [syzbot] [bluetooth?] KASAN: slab-out-of-bounds Read in sco_sock_setsockopt, syzbot
  • [PATCH] Bluetooth: fix oob in sco_sock_setsockopt, Edward Adam Davis
    • Re: [PATCH] Bluetooth: fix oob in sco_sock_setsockopt, Luiz Augusto von Dentz
    • RE: Bluetooth: fix oob in sco_sock_setsockopt, bluez . test . bot
• [bluez/bluez] 031174: device: Fix attemting to set WakeAllowed without i..., Luiz Augusto von Dentz
• [bluez/bluez] ca3d0d: adapter: Enable Wideband Speech, Luiz Augusto von Dentz
• [PATCH v2] Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl, me
  • RE: [v2] Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl, bluez . test . bot
• QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
  • QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
  • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
    • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
      • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
        • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
      • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Kalle Valo
        • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
          • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Kalle Valo
      • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
        • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
          • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
          • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Luiz Augusto von Dentz
            • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
            • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
              • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
                • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
                  • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
                    • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
                      • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, quic_zijuhu
                        • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
                          • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, quic_zijuhu
                            • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, Wren Turkal
                              • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, quic_zijuhu
                              • Re: QCA6390 bluetooth doesn't work after warm boot or disable/reenable, quic_zijuhu
• [PATCH] Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl, me
  • RE: Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl, bluez . test . bot
• [bluez/bluez] 036583: device: Add btd_device_bearer_is_connected, Pauli Virtanen
• dead link for subscribing to mailing list on bluez website, Wren Turkal
  • dead link for subscribing to mailing list on bluez website, Wren Turkal
  • Re: dead link for subscribing to mailing list on bluez website, Wren Turkal
    • Re: dead link for subscribing to mailing list on bluez website, Wren Turkal
• [PATCH BlueZ v7 0/7] tests: add TX timestamping tests, Pauli Virtanen
  • [PATCH BlueZ v7 1/7] lib: add BT_SCM_ERROR, Pauli Virtanen
    • RE: tests: add TX timestamping tests, bluez . test . bot
  • [PATCH BlueZ v7 2/7] iso-tester: Add tests for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v7 4/7] btdev: set nonzero SCO mtu & max pkt, Pauli Virtanen
  • [PATCH BlueZ v7 3/7] l2cap-tester: Add test for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v7 5/7] sco-tester: add TX timestamping test, Pauli Virtanen
  • [PATCH BlueZ v7 6/7] bthost: handle client L2CAP conn in LE credit based mode, Pauli Virtanen
  • [PATCH BlueZ v7 7/7] l2cap-tester: add tests for LE Client read/write/tx-timestamping, Pauli Virtanen
  • Re: [PATCH BlueZ v7 0/7] tests: add TX timestamping tests, patchwork-bot+bluetooth
• [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Luiz Augusto von Dentz
  • RE: [v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, bluez . test . bot
  • <Possible follow-ups>
  • [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Luiz Augusto von Dentz
    • [PATCH v1 1/4] Bluetooth: SCO: Fix not validating setsockopt user input, Luiz Augusto von Dentz
    • RE: [v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, bluez . test . bot
    • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, patchwork-bot+bluetooth
    • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Janne Grunau
      • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Luiz Augusto von Dentz
        • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Janne Grunau
          • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Luiz Augusto von Dentz
            • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Luiz Augusto von Dentz
              • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Hector Martin
                • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Sven Peter
                  • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Luiz Augusto von Dentz
                    • Re: [PATCH v1] Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync, Sven Peter
• [PATCH net] Bluetooth: validate setsockopt(RFCOMM_LM) user input, Eric Dumazet
  • RE: [net] Bluetooth: validate setsockopt(RFCOMM_LM) user input, bluez . test . bot
  • Re: [PATCH net] Bluetooth: validate setsockopt(RFCOMM_LM) user input, Simon Horman
• [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Eric Dumazet
  • RE: [net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, bluez . test . bot
  • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Luiz Augusto von Dentz
    • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Eric Dumazet
      • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Luiz Augusto von Dentz
        • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Eric Dumazet
          • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Luiz Augusto von Dentz
            • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Eric Dumazet
              • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Luiz Augusto von Dentz
                • Re: [PATCH net] Bluetooth: validate setsockopt( BT_PKT_STATUS / BT_DEFER_SETUP) user input, Eric Dumazet
• On https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465, Dmitry Antipov
• [PATCH BlueZ v2 0/1] Autoconnecttimeout max value increased to 20480 msecs, Mahesh Talewad
  • [PATCH BlueZ v2 1/1] Increase autoconnect timeout max from 16.384s to 20.480s, Mahesh Talewad
    • Re: [PATCH BlueZ v2 1/1] Increase autoconnect timeout max from 16.384s to 20.480s, Paul Menzel
    • RE: Autoconnecttimeout max value increased to 20480 msecs, bluez . test . bot
    • Re: [PATCH BlueZ v2 1/1] Increase autoconnect timeout max from 16.384s to 20.480s, Luiz Augusto von Dentz
• [PATCH] Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit, Archie Pusaka
  • RE: Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit, bluez . test . bot
  • Re: [PATCH] Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit, patchwork-bot+bluetooth
• [Bug 218680] New: bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
  • [Bug 218680] bluetooth connected status not shown in KDE desktop GUIs, bugzilla-daemon
• [PATCH BlueZ 0/1] Fixes busy loop when disabling, Dimitris
  • [PATCH BlueZ 1/1] Revert "device: Consider service state on device_is_connected", Dimitris
    • RE: Fixes busy loop when disabling, bluez . test . bot
    • Re: [PATCH BlueZ 1/1] Revert "device: Consider service state on device_is_connected", Paul Menzel
      • Re: [PATCH BlueZ 1/1] Revert "device: Consider service state on device_is_connected", Dimitris
  • [PATCH BlueZ 0/1] V2: Fix busy loop when disabling BT, Dimitris
    • [PATCH BlueZ 1/1] Refactor btd_device_is_connected, Dimitris
      • RE: V2: Fix busy loop when disabling BT, bluez . test . bot
      • Re: [PATCH BlueZ 1/1] Refactor btd_device_is_connected, Luiz Augusto von Dentz
        • Re: [PATCH BlueZ 1/1] Refactor btd_device_is_connected, Dimitris
          • Re: [PATCH BlueZ 1/1] Refactor btd_device_is_connected, Luiz Augusto von Dentz
            • Re: [PATCH BlueZ 1/1] Refactor btd_device_is_connected, Dimitris
        • [PATCH BlueZ 0/1] V3: Fix busy loop when disabling BT, Dimitris
          • [PATCH BlueZ 1/1] refactor bearer connected test, Dimitris
            • RE: V3: Fix busy loop when disabling BT, bluez . test . bot
          • Re: [PATCH BlueZ 0/1] V3: Fix busy loop when disabling BT, patchwork-bot+bluetooth
• [PATCH BlueZ v6 0/7] tests: add TX timestamping tests, Pauli Virtanen
  • [PATCH BlueZ v6 4/7] btdev: set nonzero SCO mtu & max pkt, Pauli Virtanen
  • [PATCH BlueZ v6 3/7] l2cap-tester: Add test for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v6 5/7] sco-tester: add TX timestamping test, Pauli Virtanen
  • [PATCH BlueZ v6 7/7] l2cap-tester: add tests for LE Client read/write/tx-timestamping, Pauli Virtanen
  • [PATCH BlueZ v6 6/7] bthost: handle client L2CAP conn in LE credit based mode, Pauli Virtanen
  • [PATCH BlueZ v6 1/7] lib: add BT_SCM_ERROR, Pauli Virtanen
    • RE: tests: add TX timestamping tests, bluez . test . bot
  • [PATCH BlueZ v6 2/7] iso-tester: Add tests for TX timestamping, Pauli Virtanen
• [PATCH BlueZ] advertising: Do not crash in case of adv update failure, Arkadiusz Bokowy
  • RE: [BlueZ] advertising: Do not crash in case of adv update failure, bluez . test . bot
  • [PATCH BlueZ v2] advertising: Do not crash in case of adv update failure, Arkadiusz Bokowy
    • RE: [BlueZ,v2] advertising: Do not crash in case of adv update failure, bluez . test . bot
• [PATCH BlueZ v5 0/7] tests: add TX timestamping tests, Pauli Virtanen
  • [PATCH BlueZ v5 4/7] btdev: set nonzero SCO mtu & max pkt, Pauli Virtanen
  • [PATCH BlueZ v5 3/7] l2cap-tester: Add test for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v5 6/7] bthost: handle client L2CAP conn in LE credit based mode, Pauli Virtanen
  • [PATCH BlueZ v5 2/7] iso-tester: Add tests for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v5 5/7] sco-tester: add TX timestamping test, Pauli Virtanen
  • [PATCH BlueZ v5 1/7] lib: add BT_SCM_ERROR, Pauli Virtanen
    • RE: tests: add TX timestamping tests, bluez . test . bot
      • Re: tests: add TX timestamping tests, Luiz Augusto von Dentz
  • [PATCH BlueZ v5 7/7] l2cap-tester: add tests for LE Client read/write/tx-timestamping, Pauli Virtanen
• [PATCH] [RFC] Bluetooth: fix race condition in sco_connect(), Dmitry Antipov
  • RE: [RFC] Bluetooth: fix race condition in sco_connect(), bluez . test . bot
• [PATCH v2 0/7] mmc/wifi/bluetooth: store owner from modules with sdio_register_driver(), Krzysztof Kozlowski
  • [PATCH v2 1/7] Bluetooth: btmrvl_sdio: drop driver owner initialization, Krzysztof Kozlowski
    • RE: mmc/wifi/bluetooth: store owner from modules with sdio_register_driver(), bluez . test . bot
  • [PATCH v2 2/7] Bluetooth: btmtksdio: drop driver owner initialization, Krzysztof Kozlowski
  • [PATCH v2 4/7] wifi: ath10k: sdio: drop driver owner initialization, Krzysztof Kozlowski
  • [PATCH v2 3/7] wifi: ath10k: sdio: simplify module initialization, Krzysztof Kozlowski
  • [PATCH v2 5/7] wifi: brcm80211: drop driver owner initialization, Krzysztof Kozlowski
  • [PATCH v2 6/7] wifi: mwifiex: drop driver owner initialization, Krzysztof Kozlowski
  • [PATCH v2 7/7] wifi: wfx: drop driver owner initialization, Krzysztof Kozlowski
  • Re: [PATCH v2 0/7] mmc/wifi/bluetooth: store owner from modules with sdio_register_driver(), Ulf Hansson
• [PATCH 0/1] Bluetooth: Handle HAS_IOPORT dependencies, Niklas Schnelle
  • [PATCH 1/1] Bluetooth: add HAS_IOPORT dependencies, Niklas Schnelle
    • RE: Bluetooth: Handle HAS_IOPORT dependencies, bluez . test . bot
• [PATCH BlueZ] plugins: Add new plugin to fix airpods pairing, Frédéric Danis
  • RE: [BlueZ] plugins: Add new plugin to fix airpods pairing, bluez . test . bot
  • Re: [PATCH BlueZ] plugins: Add new plugin to fix airpods pairing, Szymon Janc
    • Re: [PATCH BlueZ] plugins: Add new plugin to fix airpods pairing, Frédéric Danis
• [Bluez PATCH 0/2] Fix descriptor display issue in btmon, Howard Chung
  • [Bluez PATCH 1/2] shared/gatt: Rename some gatt insert functions to append, Howard Chung
    • RE: Fix descriptor display issue in btmon, bluez . test . bot
    • Re: [Bluez PATCH 1/2] shared/gatt: Rename some gatt insert functions to append, Luiz Augusto von Dentz
  • [Bluez PATCH 2/2] shared/gatt: Add descriptor insert function, Howard Chung
    • Re: [Bluez PATCH 2/2] shared/gatt: Add descriptor insert function, Luiz Augusto von Dentz
      • Re: [Bluez PATCH 2/2] shared/gatt: Add descriptor insert function, Yun-hao Chung
        • Re: [Bluez PATCH 2/2] shared/gatt: Add descriptor insert function, Luiz Augusto von Dentz
          • Re: [Bluez PATCH 2/2] shared/gatt: Add descriptor insert function, Luiz Augusto von Dentz
• [bluetooth-next:master] BUILD SUCCESS 3e3fa13686bf73bddc07072894085ef93df65ace, kernel test robot
• [bluez/bluez] 0d3822: bap: Fix endpoint unregister for BAP broadcast source, Luiz Augusto von Dentz
• [PATCH BlueZ v4 0/7] tests: add TX timestamping tests, Pauli Virtanen
  • [PATCH BlueZ v4 4/7] btdev: set nonzero SCO mtu & max pkt, Pauli Virtanen
  • [PATCH BlueZ v4 1/7] lib: add BT_SCM_ERROR, Pauli Virtanen
    • RE: tests: add TX timestamping tests, bluez . test . bot
  • [PATCH BlueZ v4 3/7] l2cap-tester: Add test for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v4 2/7] iso-tester: Add tests for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v4 6/7] bthost: handle client L2CAP conn in LE credit based mode, Pauli Virtanen
  • [PATCH BlueZ v4 5/7] sco-tester: add TX timestamping test, Pauli Virtanen
  • [PATCH BlueZ v4 7/7] l2cap-tester: add tests for LE Client read/write/tx-timestamping, Pauli Virtanen
• [PATCH v2] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, me
  • RE: [v2] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, bluez . test . bot
  • Re: [PATCH v2] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, Uri Arev
    • Re: [PATCH v2] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, Uri Arev
  • Re: [PATCH v2] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, patchwork-bot+bluetooth
• [PATCH BlueZ] adapter: add support for setting NO_ERRQUEUE_POLL experimental feature, Pauli Virtanen
  • RE: [BlueZ] adapter: add support for setting NO_ERRQUEUE_POLL experimental feature, bluez . test . bot
• [PATCH BlueZ v3 0/8] tests: add TX timestamping tests, Pauli Virtanen
  • [PATCH BlueZ v3 1/8] lib: add BT_SCM_ERROR and BT_NO_ERRQUEUE_POLL, Pauli Virtanen
    • Re: [PATCH BlueZ v3 1/8] lib: add BT_SCM_ERROR and BT_NO_ERRQUEUE_POLL, Luiz Augusto von Dentz
    • RE: tests: add TX timestamping tests, bluez . test . bot
  • [PATCH BlueZ v3 4/8] btdev: set nonzero SCO mtu & max pkt, Pauli Virtanen
  • [PATCH BlueZ v3 3/8] l2cap-tester: Add test for TX timestamping, Pauli Virtanen
  • [PATCH BlueZ v3 2/8] iso-tester: Add tests for TX timestamping, Pauli Virtanen
    • Re: [PATCH BlueZ v3 2/8] iso-tester: Add tests for TX timestamping, Luiz Augusto von Dentz
  • [PATCH BlueZ v3 5/8] sco-tester: add TX timestamping test, Pauli Virtanen
  • [PATCH BlueZ v3 6/8] bthost: handle client L2CAP conn in LE credit based mode, Pauli Virtanen
  • [PATCH BlueZ v3 7/8] l2cap-tester: add tests for LE Client read/write/tx-timestamping, Pauli Virtanen
  • [PATCH BlueZ v3 8/8] iso-tester: add test for BT_NO_ERRQUEUE_POLL, Pauli Virtanen
• [PATCH v3] Bluetooth: add experimental BT_NO_ERRQUEUE_POLL socket option, Pauli Virtanen
  • RE: [v3] Bluetooth: add experimental BT_NO_ERRQUEUE_POLL socket option, bluez . test . bot
  • Re: [PATCH v3] Bluetooth: add experimental BT_NO_ERRQUEUE_POLL socket option, Luiz Augusto von Dentz
    • Re: [PATCH v3] Bluetooth: add experimental BT_NO_ERRQUEUE_POLL socket option, Pauli Virtanen
• [PATCH] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, me
  • Re: [PATCH] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, Luiz Augusto von Dentz
    • Re: [PATCH] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, Uri Arev
      • Re: [PATCH] Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, Uri Arev
  • RE: Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl, bluez . test . bot
• [PATCH BlueZ 0/1] bap: Fix endpoint unregister for BAP broadcast source, Silviu Florian Barbulescu
  • [PATCH BlueZ 1/1] bap: Fix endpoint unregister for BAP broadcast source, Silviu Florian Barbulescu
    • RE: bap: Fix endpoint unregister for BAP broadcast source, bluez . test . bot
  • Re: [PATCH BlueZ 0/1] bap: Fix endpoint unregister for BAP broadcast source, patchwork-bot+bluetooth
• [PATCH BlueZ 0/3] iso-tester: Add test for Broadcast Receiver Get BASE, Iulia Tanasescu
  • [PATCH BlueZ 1/3] lib: Add macros for HCI_MAX_PER_AD_LENGTH and EIR_SERVICE_DATA_LENGTH, Iulia Tanasescu
    • RE: iso-tester: Add test for Broadcast Receiver Get BASE, bluez . test . bot
  • [PATCH BlueZ 2/3] bthost: Add support for Set PA data, Iulia Tanasescu
  • [PATCH BlueZ 3/3] iso-tester: Add test for Broadcast Receiver Get BASE, Iulia Tanasescu
    • Re: [PATCH BlueZ 3/3] iso-tester: Add test for Broadcast Receiver Get BASE, Luiz Augusto von Dentz
• [PATCH 0/2] Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated, Iulia Tanasescu
  • [PATCH 1/2] Bluetooth: ISO: Make iso_get_sock_listen generic, Iulia Tanasescu
    • RE: Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated, bluez . test . bot
    • Re: [PATCH 1/2] Bluetooth: ISO: Make iso_get_sock_listen generic, Luiz Augusto von Dentz
  • [PATCH 2/2] Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated, Iulia Tanasescu
  • Re: [PATCH 0/2] Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated, patchwork-bot+bluetooth
• [PATCH] Bluetooth: fix memory leak in hci_req_sync_complete(), Dmitry Antipov
  • RE: Bluetooth: fix memory leak in hci_req_sync_complete(), bluez . test . bot
  • Re: [PATCH] Bluetooth: fix memory leak in hci_req_sync_complete(), patchwork-bot+bluetooth
• [bluetooth-next:master] BUILD SUCCESS 2216e1eabc7ca013eb1e8007846253dee72dcb76, kernel test robot
• [syzbot] [bluetooth?] WARNING in msft_do_close, syzbot
• [bluez/bluez] 4520ec: mgmt-tester: Adjust Coded PHY scan interval and wi..., Luiz Augusto von Dentz
• [PATCH v1] Bluetooth: btintel: Attempt to reset if Read Version fail during setup, Luiz Augusto von Dentz
  • RE: [v1] Bluetooth: btintel: Attempt to reset if Read Version fail during setup, bluez . test . bot
  • Re: [PATCH v1] Bluetooth: btintel: Attempt to reset if Read Version fail during setup, Manuel Mendez
• [syzbot] [bluetooth?] memory leak in corrupted (2), syzbot
• [PATCH BlueZ v4 1/3] input/device: Fix not handling IdleTimeout when uhid is in use, Luiz Augusto von Dentz
  • [PATCH BlueZ v4 2/3] input.conf: Change IdleTimeout unit to be in seconds, Luiz Augusto von Dentz
  • [PATCH BlueZ v4 3/3] input/device: Add replay support, Luiz Augusto von Dentz
  • RE: [BlueZ,v4,1/3] input/device: Fix not handling IdleTimeout when uhid is in use, bluez . test . bot
• [PATCH bluetooth] Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old(), Nathan Chancellor
  • RE: Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old(), bluez . test . bot
  • Re: [PATCH bluetooth] Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old(), Justin Stitt
  • Re: [PATCH bluetooth] Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old(), patchwork-bot+bluetooth
• [PATCH v2 1/2] Bluetooth: btintel: Dump exception event, Kiran K
  • [PATCH v2 2/2] Bluetooth: btintel: Direct exception event to bluetooth stack, Kiran K
  • RE: [v2,1/2] Bluetooth: btintel: Dump exception event, bluez . test . bot
  • RE: [PATCH v2 1/2] Bluetooth: btintel: Dump exception event, K, Kiran
• [PATCH v1 1/2] Bluetooth: btintel: Direct exception event to bluetooth stack, Kiran K
  • [PATCH v1 2/2] Bluetooth: btintel: Dump exception event, Kiran K
  • RE: [PATCH v1 1/2] Bluetooth: btintel: Direct exception event to bluetooth stack, K, Kiran
  • RE: [v1,1/2] Bluetooth: btintel: Direct exception event to bluetooth stack, bluez . test . bot
• [PATCH v2 00/25] virtio: store owner from modules with register_virtio_driver(), Krzysztof Kozlowski
  • [PATCH v2 01/25] virtio: store owner from modules with register_virtio_driver(), Krzysztof Kozlowski
    • RE: virtio: store owner from modules with register_virtio_driver(), bluez . test . bot
  • [PATCH v2 02/25] virtio: balloon: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 03/25] virtio: input: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 04/25] virtio: mem: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 05/25] um: virt-pci: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 06/25] virtio_blk: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 06/25] virtio_blk: drop owner assignment, Stefan Hajnoczi
  • [PATCH v2 07/25] bluetooth: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 08/25] hwrng: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 09/25] virtio_console: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 10/25] crypto: virtio - drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 11/25] firmware: arm_scmi: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 11/25] firmware: arm_scmi: virtio: drop owner assignment, Sudeep Holla
  • [PATCH v2 12/25] gpio: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 12/25] gpio: virtio: drop owner assignment, Linus Walleij
  • [PATCH v2 13/25] drm/virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 14/25] iommu: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 15/25] misc: nsm: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 15/25] misc: nsm: drop owner assignment, Alexander Graf
  • [PATCH v2 16/25] net: caif: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 17/25] net: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 18/25] net: 9p: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 19/25] vsock/virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 19/25] vsock/virtio: drop owner assignment, Stefan Hajnoczi
  • [PATCH v2 20/25] wifi: mac80211_hwsim: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 21/25] nvdimm: virtio_pmem: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 21/25] nvdimm: virtio_pmem: drop owner assignment, Gupta, Pankaj
    • Re: [PATCH v2 21/25] nvdimm: virtio_pmem: drop owner assignment, Ira Weiny
  • [PATCH v2 22/25] rpmsg: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH v2 23/25] scsi: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 23/25] scsi: virtio: drop owner assignment, Stefan Hajnoczi
    • Re: [PATCH v2 23/25] scsi: virtio: drop owner assignment, Martin K. Petersen
  • [PATCH v2 24/25] fuse: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 24/25] fuse: virtio: drop owner assignment, Stefan Hajnoczi
  • [PATCH v2 25/25] sound: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH v2 25/25] sound: virtio: drop owner assignment, Anton Yakovlev
  • Re: [PATCH v2 00/25] virtio: store owner from modules with register_virtio_driver(), Krzysztof Kozlowski
    • Re: [PATCH v2 00/25] virtio: store owner from modules with register_virtio_driver(), Michael S. Tsirkin
• [PATCH 0/7] mmc/wifi/bluetooth: store owner from modules with sdio_register_driver(), Krzysztof Kozlowski
  • [PATCH 1/7] mmc: sdio: store owner from modules with sdio_register_driver(), Krzysztof Kozlowski
    • RE: mmc/wifi/bluetooth: store owner from modules with sdio_register_driver(), bluez . test . bot
    • Re: [PATCH 1/7] mmc: sdio: store owner from modules with sdio_register_driver(), Francesco Dolcini
      • Re: [PATCH 1/7] mmc: sdio: store owner from modules with sdio_register_driver(), Krzysztof Kozlowski
  • [PATCH 2/7] bluetooth: btmrvl_sdio: drop driver owner initialization, Krzysztof Kozlowski
  • [PATCH 3/7] bluetooth: btmtksdio: drop driver owner initialization, Krzysztof Kozlowski
  • [PATCH 4/7] wifi: ath10k: sdio: drop driver owner initialization, Krzysztof Kozlowski
    • Re: [PATCH 4/7] wifi: ath10k: sdio: drop driver owner initialization, Jeff Johnson
  • [PATCH 5/7] wifi: brcm80211: drop driver owner initialization, Krzysztof Kozlowski
    • Re: [PATCH 5/7] wifi: brcm80211: drop driver owner initialization, Arend Van Spriel
  • [PATCH 6/7] wifi: marvell: mwifiex: drop driver owner initialization, Krzysztof Kozlowski
    • Re: [PATCH 6/7] wifi: marvell: mwifiex: drop driver owner initialization, Francesco Dolcini
    • Re: [PATCH 6/7] wifi: marvell: mwifiex: drop driver owner initialization, Kalle Valo
  • [PATCH 7/7] wifi: silabs: wfx: drop driver owner initialization, Krzysztof Kozlowski
    • Re: [PATCH 7/7] wifi: silabs: wfx: drop driver owner initialization, Kalle Valo
  • Re: [PATCH 0/7] mmc/wifi/bluetooth: store owner from modules with sdio_register_driver(), Ulf Hansson
• pull request: bluetooth 2024-03-29, Luiz Augusto von Dentz
  • Re: pull request: bluetooth 2024-03-29, patchwork-bot+netdevbpf
  • Re: pull request: bluetooth 2024-03-29, patchwork-bot+bluetooth
• [PATCH BlueZ 0/1] bap: Remove entry of deleted device from bcast_pa_requests queue, Vlad Pruteanu
  • [PATCH BlueZ 1/1] bap: Remove entry of deleted device from bcast_pa_requests queue, Vlad Pruteanu
    • Re: [PATCH BlueZ 1/1] bap: Remove entry of deleted device from bcast_pa_requests queue, Luiz Augusto von Dentz
    • RE: bap: Remove entry of deleted device from bcast_pa_requests queue, bluez . test . bot
• [PATCH AUTOSEL 4.19 11/11] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH AUTOSEL 5.4 15/15] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH AUTOSEL 5.10 17/17] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH AUTOSEL 5.15 20/20] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH AUTOSEL 6.1 31/31] Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922, Sasha Levin
• [PATCH AUTOSEL 6.1 30/31] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH AUTOSEL 6.6 52/52] Bluetooth: Add new quirk for broken read key length on ATS2851, Sasha Levin
• [PATCH AUTOSEL 6.6 51/52] Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922, Sasha Levin
• [PATCH AUTOSEL 6.6 50/52] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH AUTOSEL 6.8 68/68] Bluetooth: Add new quirk for broken read key length on ATS2851, Sasha Levin
• [PATCH AUTOSEL 6.8 67/68] Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922, Sasha Levin
• [PATCH AUTOSEL 6.8 66/68] Bluetooth: btintel: Fix null ptr deref in btintel_read_version, Sasha Levin
• [PATCH BlueZ v1 0/1] Autoconnecttimeout max value increased to 20000 msecs, Mahesh Talewad
  • [PATCH BlueZ v1 1/1] Autoconnecttimeout max value increased to 20000 msecs from 16384 msecs, Mahesh Talewad
    • RE: Autoconnecttimeout max value increased to 20000 msecs, bluez . test . bot
    • Re: [PATCH BlueZ v1 1/1] Autoconnecttimeout max value increased to 20000 msecs from 16384 msecs, Paul Menzel
• [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853, WangYuli
  • RE: [RESEND.,v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853, bluez . test . bot
  • Re: [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853, patchwork-bot+bluetooth
• [PATCH v1] Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED, Luiz Augusto von Dentz
  • RE: [v1] Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED, bluez . test . bot
  • Re: [PATCH v1] Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED, patchwork-bot+bluetooth
• [PATCH v1 1/2] Bluetooth: Add proper definitions for scan interval and window, Luiz Augusto von Dentz
  • [PATCH v1 2/2] Bluetooth: hci_sync: Fix using the same interval and window for Coded PHY, Luiz Augusto von Dentz
  • RE: [v1,1/2] Bluetooth: Add proper definitions for scan interval and window, bluez . test . bot
  • Re: [PATCH v1 1/2] Bluetooth: Add proper definitions for scan interval and window, patchwork-bot+bluetooth
• [PATCH BlueZ v3 1/2] input/device: Fix not handling IdleTimeout when uhid is in use, Luiz Augusto von Dentz
  • [PATCH BlueZ v3 2/2] input.conf: Change IdleTimeout unit to be in seconds, Luiz Augusto von Dentz
  • RE: [BlueZ,v3,1/2] input/device: Fix not handling IdleTimeout when uhid is in use, bluez . test . bot
• [bluez/bluez] 868d8f: shared/shell: Add script command, iulia-tanasescu
• [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Werner Sembach
  • Re: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Paul Menzel
    • Re: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Christoffer Sandberg
  • RE: Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, bluez . test . bot
  • Re: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Luiz Augusto von Dentz
    • Re: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Werner Sembach
      • Re: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Pauli Virtanen
        • Re: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, Werner Sembach
  • RE: [PATCH] Bluetooth: btintel: Add devices to HCI_QUIRK_BROKEN_LE_CODED, K, Kiran
• [PATCH v1 1/3] Bluetooth: btintel: Export few static functions, Kiran K
  • [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, Kiran K
    • Re: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, Paul Menzel
      • RE: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, K, Kiran
        • Re: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, Luiz Augusto von Dentz
    • Re: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, Luiz Augusto von Dentz
      • Re: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, Luiz Augusto von Dentz
      • RE: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, K, Kiran
    • Re: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, Bjorn Helgaas
      • RE: [PATCH v1 2/3] Bluetooth: btintel_pcie: Add support for PCIE transport, K, Kiran
  • [PATCH v1 3/3] Bluetooth: btintel_pcie: Add *setup* function to download firmware, Kiran K
    • Re: [PATCH v1 3/3] Bluetooth: btintel_pcie: Add *setup* function to download firmware, Bjorn Helgaas
      • RE: [PATCH v1 3/3] Bluetooth: btintel_pcie: Add *setup* function to download firmware, K, Kiran
    • Re: [PATCH v1 3/3] Bluetooth: btintel_pcie: Add *setup* function to download firmware, Bjorn Helgaas
      • Re: [PATCH v1 3/3] Bluetooth: btintel_pcie: Add *setup* function to download firmware, Bjorn Helgaas
  • RE: [v1,1/3] Bluetooth: btintel: Export few static functions, bluez . test . bot
• [no subject], Павел Решетников
• [bluetooth-next:master] BUILD SUCCESS db4597cc88b2621706dc39a7363e61f4e7734425, kernel test robot
• [syzbot] [bluetooth?] KASAN: slab-use-after-free Read in mgmt_pending_foreach, syzbot
• [Bug 218651] New: kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
  • [Bug 218651] kernel 6.8.2 - Bluetooth bug/dump at boot, bugzilla-daemon
• Maximum Bonded Devices, Chris Laplante
  • Re: Maximum Bonded Devices, Luiz Augusto von Dentz
    • RE: Maximum Bonded Devices, Chris Laplante
      • Re: Maximum Bonded Devices, Luiz Augusto von Dentz
        • RE: Maximum Bonded Devices, Chris Laplante
• [PATCH v2][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Gustavo A. R. Silva
  • RE: [v2,next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, bluez . test . bot
  • Re: [PATCH v2][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Luiz Augusto von Dentz
    • Re: [PATCH v2][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Gustavo A. R. Silva
      • Re: [PATCH v2][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Kees Cook
        • Re: [PATCH v2][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Gustavo A. R. Silva
  • Re: [PATCH v2][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, patchwork-bot+bluetooth
• [PATCH BlueZ 0/2] Remove POLLOUT check before bcast defer accept, Iulia Tanasescu
  • [PATCH BlueZ 2/2] iso-tester: Separate iso_defer_accept into dedicated functions, Iulia Tanasescu
    • Re: [PATCH BlueZ 2/2] iso-tester: Separate iso_defer_accept into dedicated functions, Luiz Augusto von Dentz
      • Re: [PATCH BlueZ 2/2] iso-tester: Separate iso_defer_accept into dedicated functions, Pauli Virtanen
        • Re: [PATCH BlueZ 2/2] iso-tester: Separate iso_defer_accept into dedicated functions, Iulia Tanasescu
  • [PATCH BlueZ 1/2] btio: Remove POLLOUT check from bt_io_bcast_accept, Iulia Tanasescu
    • RE: Remove POLLOUT check before bcast defer accept, bluez . test . bot
  • Re: [PATCH BlueZ 0/2] Remove POLLOUT check before bcast defer accept, patchwork-bot+bluetooth
• [PATCH BlueZ v1] monitor/att: Add support for decoding GATT Long Reads, Luiz Augusto von Dentz
  • RE: [BlueZ,v1] monitor/att: Add support for decoding GATT Long Reads, bluez . test . bot
  • Re: [PATCH BlueZ v1] monitor/att: Add support for decoding GATT Long Reads, patchwork-bot+bluetooth
  • <Possible follow-ups>
  • [PATCH BlueZ v1] monitor/att: Add support for decoding GATT Long Reads, Luiz Augusto von Dentz
    • RE: [BlueZ,v1] monitor/att: Add support for decoding GATT Long Reads, bluez . test . bot
• [PATCH] Bluetooth: Fix TOCTOU in HCI debugfs implementation, Bastien Nocera
  • RE: Bluetooth: Fix TOCTOU in HCI debugfs implementation, bluez . test . bot
  • Re: [PATCH] Bluetooth: Fix TOCTOU in HCI debugfs implementation, patchwork-bot+bluetooth
  • Re: [PATCH] Bluetooth: Fix TOCTOU in HCI debugfs implementation, Gui-Dong Han
• [PATCH v1] Bluetooth: btintel: Fail *setup* if firmware download fails, Kiran K
• [PATCH BlueZ 0/1] Fix MediaEndpoint prop codec for bcast src endpoint, Silviu Florian Barbulescu
  • [PATCH BlueZ 1/1] bap: Fix MediaEndpoint prop codec for bcast src endpoint, Silviu Florian Barbulescu
    • RE: Fix MediaEndpoint prop codec for bcast src endpoint, bluez . test . bot
  • Re: [PATCH BlueZ 0/1] Fix MediaEndpoint prop codec for bcast src endpoint, patchwork-bot+bluetooth
• [PATCH 00/22] virtio: store owner from modules with register_virtio_driver(), Krzysztof Kozlowski
  • [PATCH 01/22] virtio: store owner from modules with register_virtio_driver(), Krzysztof Kozlowski
    • RE: virtio: store owner from modules with register_virtio_driver(), bluez . test . bot
    • Re: [PATCH 01/22] virtio: store owner from modules with register_virtio_driver(), Stefano Garzarella
      • Re: [PATCH 01/22] virtio: store owner from modules with register_virtio_driver(), Krzysztof Kozlowski
        • Re: [PATCH 01/22] virtio: store owner from modules with register_virtio_driver(), Stefano Garzarella
    • Re: [PATCH 01/22] virtio: store owner from modules with register_virtio_driver(), Michael S. Tsirkin
  • [PATCH 02/22] um: virt-pci: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH 02/22] um: virt-pci: drop owner assignment, Johannes Berg
      • Re: [PATCH 02/22] um: virt-pci: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 03/22] virtio_blk: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 04/22] bluetooth: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 05/22] hwrng: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 06/22] virtio_console: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 07/22] crypto: virtio - drop owner assignment, Krzysztof Kozlowski
  • [PATCH 11/22] iommu: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 13/22] net: caif: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 14/22] net: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 15/22] net: 9p: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 16/22] net: vmw_vsock: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH 16/22] net: vmw_vsock: virtio: drop owner assignment, Stefano Garzarella
  • [PATCH 08/22] firmware: arm_scmi: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 12/22] misc: nsm: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 17/22] wireless: mac80211_hwsim: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH 17/22] wireless: mac80211_hwsim: drop owner assignment, Kalle Valo
      • Re: [PATCH 17/22] wireless: mac80211_hwsim: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 19/22] rpmsg: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH 19/22] rpmsg: virtio: drop owner assignment, Mathieu Poirier
  • [PATCH 09/22] gpio: virtio: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH 09/22] gpio: virtio: drop owner assignment, Viresh Kumar
    • Re: [PATCH 09/22] gpio: virtio: drop owner assignment, Bartosz Golaszewski
      • Re: [PATCH 09/22] gpio: virtio: drop owner assignment, Stefano Garzarella
      • Re: [PATCH 09/22] gpio: virtio: drop owner assignment, Krzysztof Kozlowski
        • Re: [PATCH 09/22] gpio: virtio: drop owner assignment, Bartosz Golaszewski
  • [PATCH 20/22] scsi: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 21/22] fuse: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 22/22] sound: virtio: drop owner assignment, Krzysztof Kozlowski
  • [PATCH 18/22] nvdimm: virtio_pmem: drop owner assignment, Krzysztof Kozlowski
    • Re: [PATCH 18/22] nvdimm: virtio_pmem: drop owner assignment, Dave Jiang
  • [PATCH 10/22] drm/virtio: drop owner assignment, Krzysztof Kozlowski
• [BlueZ,v1] obexd: Fix "Size" use g_dbus_emit_property_changed_full() to emit, Youwan Wang
  • RE: [BlueZ,v1] obexd: Fix "Size" use g_dbus_emit_property_changed_full() to emit, bluez . test . bot
  • Re: [BlueZ,v1] obexd: Fix "Size" use g_dbus_emit_property_changed_full() to emit, patchwork-bot+bluetooth
• [PATCH v2] Bluetooth: hci_event: set the conn encrypted before conn establishes, Hui Wang
  • RE: [v2] Bluetooth: hci_event: set the conn encrypted before conn establishes, bluez . test . bot
  • Re: [PATCH v2] Bluetooth: hci_event: set the conn encrypted before conn establishes, patchwork-bot+bluetooth
• [BlueZ] obexd: Fix "Size" use g_dbus_emit_property_changed_full() to emit, Youwan Wang
  • RE: [BlueZ] obexd: Fix "Size" use g_dbus_emit_property_changed_full() to emit, bluez . test . bot
• [PATCH][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Gustavo A. R. Silva
  • RE: [next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, bluez . test . bot
  • Re: [PATCH][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Luiz Augusto von Dentz
    • Re: [PATCH][next] Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings, Gustavo A. R. Silva
• [PATCH v1] Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync, Luiz Augusto von Dentz
  • RE: [v1] Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync, bluez . test . bot
  • Re: [PATCH v1] Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync, Linux regression tracking (Thorsten Leemhuis)
  • Re: [PATCH v1] Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync, patchwork-bot+bluetooth
• [PATCH BlueZ v1 1/2] shared/shell: Add script command, Luiz Augusto von Dentz
  • [PATCH BlueZ v1 2/2] shared/shell: Add commands from scripts to history, Luiz Augusto von Dentz
  • RE: [BlueZ,v1,1/2] shared/shell: Add script command, bluez . test . bot
  • Re: [PATCH BlueZ v1 1/2] shared/shell: Add script command, patchwork-bot+bluetooth
• [bluetooth-next:master] BUILD SUCCESS 0dc3ce6b3c1f0baf3203868b5bc69a2809800e2e, kernel test robot
• [REGRESSION] Oops during init in btintel_read_debug_features with today's mainline, Thorsten Leemhuis
  • Re: [REGRESSION] Oops during init in btintel_read_debug_features with today's mainline, Luiz Augusto von Dentz
• [bluez/bluez] 6849c6: shared/bap: add bt_bap_cancel_select to cancel ong..., Pauli Virtanen
• [bluez/bluez] 745450: bap: Fix setting adapter address type for unicast, howardchungg
• How do I used bluetoothctl's gatt menu to make an RFCOMMM discoverable?, Chris Genly
• [PATCH BlueZ v3 1/2] shared/bap: add bt_bap_cancel_select to cancel ongoing pac select, Pauli Virtanen
  • [PATCH BlueZ v3 2/2] bap: cancel ongoing SelectProperties() before freeing the ep, Pauli Virtanen
  • RE: [BlueZ,v3,1/2] shared/bap: add bt_bap_cancel_select to cancel ongoing pac select, bluez . test . bot
  • Re: [PATCH BlueZ v3 1/2] shared/bap: add bt_bap_cancel_select to cancel ongoing pac select, patchwork-bot+bluetooth
• [PATCH BlueZ 0/1] client/player: Fix transport.send command's transfer of packets, Vlad Pruteanu
  • [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Vlad Pruteanu
    • Re: [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Luiz Augusto von Dentz
      • RE: [EXT] Re: [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Vlad Pruteanu
        • Re: [EXT] Re: [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Luiz Augusto von Dentz
          • Re: [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Pauli Virtanen
            • Re: [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Luiz Augusto von Dentz
              • Re: [PATCH BlueZ 1/1] client/player: Fix transport.send command's transfer of packets, Pauli Virtanen
    • RE: client/player: Fix transport.send command's transfer of packets, bluez . test . bot
• [PATCH BlueZ 0/1] bap: Fix setting adapter address type for unicast, Vlad Pruteanu
  • [PATCH BlueZ 1/1] bap: Fix setting adapter address type for unicast, Vlad Pruteanu
    • RE: bap: Fix setting adapter address type for unicast, bluez . test . bot
  • Re: [PATCH BlueZ 0/1] bap: Fix setting adapter address type for unicast, patchwork-bot+bluetooth
• [PATCH v6 00/16] power: sequencing: implement the subsystem and add first users, Bartosz Golaszewski
  • [PATCH v6 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package, Bartosz Golaszewski
    • RE: power: sequencing: implement the subsystem and add first users, bluez . test . bot
    • Re: [PATCH v6 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package, Mark Brown
    • RE: power: sequencing: implement the subsystem and add first users, bluez . test . bot
    • Re: [PATCH v6 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package, Krzysztof Kozlowski
      • Re: [PATCH v6 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package, Bartosz Golaszewski
        • Re: [PATCH v6 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package, Krzysztof Kozlowski
    • Re: [PATCH v6 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package, Krzysztof Kozlowski
  • [PATCH v6 02/16] regulator: dt-bindings: describe the PMU module of the WCN7850 package, Bartosz Golaszewski
    • Re: [PATCH v6 02/16] regulator: dt-bindings: describe the PMU module of the WCN7850 package, Mark Brown
    • Re: [PATCH v6 02/16] regulator: dt-bindings: describe the PMU module of the WCN7850 package, Krzysztof Kozlowski
      • Re: [PATCH v6 02/16] regulator: dt-bindings: describe the PMU module of the WCN7850 package, Bartosz Golaszewski
  • [PATCH v6 03/16] dt-bindings: net: bluetooth: qualcomm: describe regulators for QCA6390, Bartosz Golaszewski
  • [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Bartosz Golaszewski
    • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Kalle Valo
      • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Bartosz Golaszewski
        • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Kalle Valo
          • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Bartosz Golaszewski
            • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Kalle Valo
              • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Bartosz Golaszewski
                • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Johan Hovold
          • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Johan Hovold
        • Re: [PATCH v6 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390, Jeff Johnson
  • [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Bartosz Golaszewski
    • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Kalle Valo
      • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Bartosz Golaszewski
        • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Kalle Valo
          • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Krzysztof Kozlowski
            • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Krzysztof Kozlowski
          • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Bartosz Golaszewski
            • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Jeff Johnson
    • Re: [PATCH v6 05/16] dt-bindings: net: wireless: describe the ath12k PCI module, Krzysztof Kozlowski
  • [PATCH v6 06/16] arm64: dts: qcom: sm8550-qrd: add the Wifi node, Bartosz Golaszewski
  • [PATCH v6 07/16] arm64: dts: qcom: sm8650-qrd: add the Wifi node, Bartosz Golaszewski
  • [PATCH v6 08/16] arm64: dts: qcom: qrb5165-rb5: add the Wifi node, Bartosz Golaszewski
  • [PATCH v6 12/16] PCI/pwrctl: add PCI power control core code, Bartosz Golaszewski
    • Re: [PATCH v6 12/16] PCI/pwrctl: add PCI power control core code, Simon Horman
  • [PATCH v6 09/16] PCI: hold the rescan mutex when scanning for the first time, Bartosz Golaszewski
  • [PATCH v6 10/16] PCI/pwrctl: reuse the OF node for power controlled devices, Bartosz Golaszewski
  • [PATCH v6 11/16] PCI/pwrctl: create platform devices for child OF nodes of the port node, Bartosz Golaszewski
  • [PATCH v6 13/16] power: sequencing: implement the pwrseq core, Bartosz Golaszewski
  • [PATCH v6 15/16] Bluetooth: qca: use the power sequencer for QCA6390, Bartosz Golaszewski
  • [PATCH v6 16/16] PCI/pwrctl: add a PCI power control driver for power sequenced devices, Bartosz Golaszewski
  • [PATCH v6 14/16] power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets, Bartosz Golaszewski
  • Re: [PATCH v6 00/16] power: sequencing: implement the subsystem and add first users, Xilin Wu
    • Re: [PATCH v6 00/16] power: sequencing: implement the subsystem and add first users, Bartosz Golaszewski
• [Bluez PATCH] Advertising: Emit features property update, Howard Chung
  • Re: [Bluez PATCH] Advertising: Emit features property update, patchwork-bot+bluetooth
  • RE: [Bluez] Advertising: Emit features property update, bluez . test . bot
• [PATCH] Bluetooth: hci_event: conn is already encryped before conn establishes, Hui Wang
  • RE: Bluetooth: hci_event: conn is already encryped before conn establishes, bluez . test . bot
  • Re: [PATCH] Bluetooth: hci_event: conn is already encryped before conn establishes, Paul Menzel
    • Re: [PATCH] Bluetooth: hci_event: conn is already encryped before conn establishes, Hui Wang
  • Re: [PATCH] Bluetooth: hci_event: conn is already encryped before conn establishes, Luiz Augusto von Dentz
    • Re: [PATCH] Bluetooth: hci_event: conn is already encryped before conn establishes, Hui Wang
• New Order., Aminda Sebastian
• How do I use bluetoothctl's gatt menu to make an RFCOMMM discoverable?, Chris Genly
• [PATCH BlueZ v2 1/2] shared/bap: add bt_bap_cancel_select to cancel ongoing pac select, Pauli Virtanen
  • [PATCH BlueZ v2 2/2] bap: cancel ongoing SelectProperties() before freeing the ep, Pauli Virtanen
    • Re: [PATCH BlueZ v2 2/2] bap: cancel ongoing SelectProperties() before freeing the ep, Luiz Augusto von Dentz
  • RE: [BlueZ,v2,1/2] shared/bap: add bt_bap_cancel_select to cancel ongoing pac select, bluez . test . bot
• [PATCH] Bluetooth: Fix unused value warning in sco_sock_connect, Bharath SM
  • RE: Bluetooth: Fix unused value warning in sco_sock_connect, bluez . test . bot
  • Re: [PATCH] Bluetooth: Fix unused value warning in sco_sock_connect, Pauli Virtanen
• [bluez/bluez] 87cabb: bap: Fix not setting adapter address type, Luiz Augusto von Dentz
• [PATCH BlueZ] avctp: Remove redundant UUID checks and additions, Xiao Yao
  • Re: [PATCH BlueZ] avctp: Remove redundant UUID checks and additions, Luiz Augusto von Dentz
    • Re: [PATCH BlueZ] avctp: Remove redundant UUID checks and additions, Yao Xiao
  • RE: [BlueZ] avctp: Remove redundant UUID checks and additions, bluez . test . bot
• [PATCH BlueZ v2] bap: Fix not setting adapter address type, Luiz Augusto von Dentz
  • Re: [PATCH BlueZ v2] bap: Fix not setting adapter address type, patchwork-bot+bluetooth
  • RE: [BlueZ,v2] bap: Fix not setting adapter address type, bluez . test . bot
• [PATCH BlueZ v1] bap: Fix not setting adapter address type, Luiz Augusto von Dentz
  • RE: [BlueZ,v1] bap: Fix not setting adapter address type, bluez . test . bot
• [bluez/bluez] bbf198: Fix crash in iov_append_ltv function, Luiz Augusto von Dentz
• [BR] bluez/bluez-libs regression, Rustmilian
• [PATCH BlueZ 0/1] Adjust SDU size based on the number of locations, Silviu Florian Barbulescu
  • [PATCH BlueZ 1/1] player: Adjust SDU size based on the number of locations, Silviu Florian Barbulescu
    • RE: Adjust SDU size based on the number of locations, bluez . test . bot
• [BlueZ] obexd: Remove redundant judgments and fix code style, Youwan Wang
  • RE: [BlueZ] obexd: Remove redundant judgments and fix code style, bluez . test . bot
  • Re: [BlueZ] obexd: Remove redundant judgments and fix code style, patchwork-bot+bluetooth
• [bluetooth-next:master] BUILD SUCCESS 60482ab92867d8f5f79994865860a6f41c83d5f3, kernel test robot
• [PATCH BlueZ 0/1] Fix crash in iov_append_ltv function, Silviu Florian Barbulescu
  • [PATCH BlueZ 1/1] Fix crash in iov_append_ltv function, Silviu Florian Barbulescu
    • RE: Fix crash in iov_append_ltv function, bluez . test . bot
  • Re: [PATCH BlueZ 0/1] Fix crash in iov_append_ltv function, patchwork-bot+bluetooth
• [PATCH BlueZ v1] shared/btsnoop: Add proper identifiers for ISO packets, Luiz Augusto von Dentz
  • RE: [BlueZ,v1] shared/btsnoop: Add proper identifiers for ISO packets, bluez . test . bot
  • Re: [PATCH BlueZ v1] shared/btsnoop: Add proper identifiers for ISO packets, patchwork-bot+bluetooth
• [PATCH BlueZ 0/2] Allow endpoint config without local endpoint argument, Silviu Florian Barbulescu
  • [PATCH BlueZ 1/2] bap: Add bcast source support for MediaEndpoint Codec, Silviu Florian Barbulescu
    • RE: Allow endpoint config without local endpoint argument, bluez . test . bot
  • [PATCH BlueZ 2/2] player: Allow endpoint config without local endpoint argument, Silviu Florian Barbulescu
    • Re: [PATCH BlueZ 2/2] player: Allow endpoint config without local endpoint argument, Luiz Augusto von Dentz
      • Re: [PATCH BlueZ 2/2] player: Allow endpoint config without local endpoint argument, Silviu Florian Barbulescu
  • Re: [PATCH BlueZ 0/2] Allow endpoint config without local endpoint argument, patchwork-bot+bluetooth
• [PATCH BlueZ v2] input/device: Fix not handling IdleTimeout when uhid is in use, Luiz Augusto von Dentz
  • RE: [BlueZ,v2] input/device: Fix not handling IdleTimeout when uhid is in use, bluez . test . bot
• [PATCH BlueZ v1] input/device: Fix not handling IdleTimeout when uhid is in use, Luiz Augusto von Dentz
  • RE: [BlueZ,v1] input/device: Fix not handling IdleTimeout when uhid is in use, bluez . test . bot
• [bluez/bluez] b8ad34: input/device: Force UHID_DESTROY on error, Luiz Augusto von Dentz
• [bluez/bluez] c04b96: a2dp: fix setup->err use-after-free, BluezTestBot
• [PATCH v4 0/4] Bluetooth: qca: fix device-address endianness, Johan Hovold
  • [PATCH v4 4/4] Bluetooth: qca: fix device-address endianness, Johan Hovold
  • [PATCH v4 1/4] dt-bindings: bluetooth: add 'qcom,local-bd-address-broken', Johan Hovold
    • RE: Bluetooth: qca: fix device-address endianness, bluez . test . bot
    • Re: [PATCH v4 1/4] dt-bindings: bluetooth: add 'qcom,local-bd-address-broken', Rob Herring
  • [PATCH v4 3/4] Bluetooth: add quirk for broken address properties, Johan Hovold
  • [PATCH v4 2/4] arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken, Johan Hovold
    • Re: [PATCH v4 2/4] arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken, Bjorn Andersson
  • Re: [PATCH v4 0/4] Bluetooth: qca: fix device-address endianness, patchwork-bot+bluetooth
• [PATCH v1 0/2] Bluetooth: qca: Add tool btattach support for more QCA soc types, Zijun Hu
  • [PATCH v1 1/2] Bluetooth: hci_ldisc: Add a ioctl HCIUARTSETPROTODATA, Zijun Hu
    • RE: Bluetooth: qca: Add tool btattach support for more QCA soc types, bluez . test . bot
  • [PATCH v1 2/2] Bluetooth: qca: Fix wrong soc_type returned for tool btattach, Zijun Hu
  • [PATCH v1] tools/btattach: Add support for all QCA soc_types, Zijun Hu
    • RE: [v1] tools/btattach: Add support for all QCA soc_types, bluez . test . bot
  • [PATCH v1 0/3] Fix 2 tool btattach issues for QCA controllers, Zijun Hu
    • [PATCH v1 2/3] Bluetooth: hci_ldisc: Add a ioctl HCIUARTSETPROTODATA, Zijun Hu
    • [PATCH v1 1/3] Bluetooth: qca: Fix crash caused by tool btattach for QCA_ROME, Zijun Hu
      • RE: Fix 2 tool btattach issues for QCA controllers, bluez . test . bot
    • [PATCH v1 3/3] Bluetooth: qca: Fix wrong soc type returned for tool btattach, Zijun Hu
    • [PATCH BlueZ v1] tools/btattach: Add support for more QCA soc types, Zijun Hu
      • RE: [BlueZ,v1] tools/btattach: Add support for more QCA soc types, bluez . test . bot
      • Re: [PATCH BlueZ v1] tools/btattach: Add support for more QCA soc types, Wren Turkal
        • Re: [PATCH BlueZ v1] tools/btattach: Add support for more QCA soc types, quic_zijuhu
          • Re: [PATCH BlueZ v1] tools/btattach: Add support for more QCA soc types, Wren Turkal
      • [PATCH BlueZ v2] tools/btattach: Add support for more QCA soc types, Zijun Hu
        • RE: [BlueZ,v2] tools/btattach: Add support for more QCA soc types, bluez . test . bot
  • [PATCH v2 0/4] Fix 2 tool btattach issues for QCA controllers, Zijun Hu
    • [PATCH v2 1/4] Bluetooth: qca: Fix crash caused by tool btattach for QCA_ROME, Zijun Hu
    • [PATCH v2 2/4] Bluetooth: qca: Fix nullptr dereference for non-serdev devices, Zijun Hu
    • [PATCH v2 3/4] Bluetooth: hci_ldisc: Add a ioctl HCIUARTSETPROTODATA, Zijun Hu
      • Re: [PATCH v2 3/4] Bluetooth: hci_ldisc: Add a ioctl HCIUARTSETPROTODATA, Luiz Augusto von Dentz
        • Re: [PATCH v2 3/4] Bluetooth: hci_ldisc: Add a ioctl HCIUARTSETPROTODATA, quic_zijuhu
    • [PATCH v2 4/4] Bluetooth: qca: Fix wrong soc type returned for tool btattach, Zijun Hu
      • Re: [PATCH v2 4/4] Bluetooth: qca: Fix wrong soc type returned for tool btattach, Luiz Augusto von Dentz
        • Re: [PATCH v2 4/4] Bluetooth: qca: Fix wrong soc type returned for tool btattach, quic_zijuhu
    • [PATCH v3 0/4] Fix 2 tool btattach issues for QCA controllers, Zijun Hu
      • [PATCH v3 1/4] Bluetooth: qca: Fix crash caused by tool btattach for QCA_ROME, Zijun Hu
        • RE: Fix 2 tool btattach issues for QCA controllers, bluez . test . bot