On Wed, 24 Apr 2024 07:07:05 +0200, Wren Turkal <wt@xxxxxxxxxxxxxxxx> said:
> On 4/22/24 6:00 AM, Bartosz Golaszewski wrote:
>> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>>
>> Any return value from gpiod_get_optional() other than a pointer to a
>> GPIO descriptor or a NULL-pointer is an error and the driver should
>> abort probing. That being said: commit 56d074d26c58 ("Bluetooth: hci_qca:
>> don't use IS_ERR_OR_NULL() with gpiod_get_optional()") no longer sets
>> power_ctrl_enabled on NULL-pointer returned by
>> devm_gpiod_get_optional(). Restore this behavior but bail-out on errors.
>
> Nack. This patch does fixes neither the disable/re-enable problem nor
> the warm boot problem.
>
> Zijun replied to this patch also with what I think is the proper
> reasoning for why it doesn't fix my setup.
>
Indeed, I only addressed a single issue here and not the code under the
default: label of the switch case. Sorry.
Could you give the following diff a try?
Bart
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 92fa20f5ac7d..0e98ad2c0c9d 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2327,16 +2327,21 @@ static int qca_serdev_probe(struct
serdev_device *serdev)
(data->soc_type == QCA_WCN6750 ||
data->soc_type == QCA_WCN6855)) {
dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
- power_ctrl_enabled = false;
+ return PTR_ERR(qcadev->bt_en);
}
+ if (!qcadev->bt_en)
+ power_ctrl_enabled = false;
+
qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
GPIOD_IN);
if (IS_ERR(qcadev->sw_ctrl) &&
(data->soc_type == QCA_WCN6750 ||
data->soc_type == QCA_WCN6855 ||
- data->soc_type == QCA_WCN7850))
- dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+ data->soc_type == QCA_WCN7850)) {
+ dev_err(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+ return PTR_ERR(qcadev->sw_ctrl);
+ }
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
@@ -2355,10 +2360,13 @@ static int qca_serdev_probe(struct
serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(qcadev->bt_en)) {
- dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
- power_ctrl_enabled = false;
+ dev_err(&serdev->dev, "failed to acquire enable gpio\n");
+ return PTR_ERR(qcadev->bt_en);
}
+ if (!qcadev->bt_en)
+ power_ctrl_enabled = false;
+
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
dev_warn(&serdev->dev, "failed to acquire clk\n");
