Linux ARM MSM

• Date Index

• Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK, (continued)
  • Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK, kernel test robot
  • [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Varadarajan Narayanan
    • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Dmitry Baryshkov
      • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Dmitry Baryshkov
        • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Varadarajan Narayanan
          • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Dmitry Baryshkov
            • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Varadarajan Narayanan
              • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Dmitry Baryshkov
                • Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register, Varadarajan Narayanan
  • [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support, Varadarajan Narayanan
    • Re: [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support, Dmitry Baryshkov
      • Re: [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support, Varadarajan Narayanan
  • [PATCH v6 5/6] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Varadarajan Narayanan
  • [PATCH v6 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc, Varadarajan Narayanan
    • Re: [PATCH v6 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc, Dmitry Baryshkov
• [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Mukesh Kumar Savaliya
  • Re: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Andi Shyti
    • Re: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Mukesh Kumar Savaliya
  • Re: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Bjorn Andersson
    • Re: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Mukesh Kumar Savaliya
• [PATCH v2 0/2] Enable various remoteprocs for qcm6490-idp and qcs6490-rb3gen2, Komal Bajaj
  • [PATCH v2 1/2] arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs, Komal Bajaj
    • Re: [PATCH v2 1/2] arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs, Dmitry Baryshkov
  • [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs, Komal Bajaj
    • Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs, Dmitry Baryshkov
      • Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs, Komal Bajaj
    • Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs, Bjorn Andersson
      • Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs, Komal Bajaj
• [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem, Mukesh Kumar Savaliya
  • Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem, Vinod Koul
  • Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem, Konrad Dybcio
    • Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem, Mukesh Kumar Savaliya
      • Re: [PATCH v2] i2c: i2c-qcom-geni: Add support to share an I2C SE from two subsystem, Konrad Dybcio
• [PATCH v3 0/4] arm64: dts: fix several display-related schema warnings, Dmitry Baryshkov
  • [PATCH v3 2/4] arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells, Dmitry Baryshkov
  • [PATCH v3 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node, Dmitry Baryshkov
  • [PATCH v3 4/4] arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes, Dmitry Baryshkov
  • [PATCH v3 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs, Dmitry Baryshkov
  • Re: (subset) [PATCH v3 0/4] arm64: dts: fix several display-related schema warnings, Bjorn Andersson
  • Re: (subset) [PATCH v3 0/4] arm64: dts: fix several display-related schema warnings, Abhinav Kumar
• [PATCH v2 0/4] arm64: dts: fix several display-related schema warnings, Dmitry Baryshkov
  • [PATCH v2 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node, Dmitry Baryshkov
  • [PATCH v2 2/4] arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells, Dmitry Baryshkov
  • [PATCH v2 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs, Dmitry Baryshkov
  • [PATCH v2 4/4] arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes, Dmitry Baryshkov
• [PATCH v3 0/4] drm/panel: add support for LG SW43408 panel, Dmitry Baryshkov
  • [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Dmitry Baryshkov
    • Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Krzysztof Kozlowski
      • Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Dmitry Baryshkov
        • Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Marijn Suijten
          • Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Dmitry Baryshkov
  • [PATCH v3 2/4] drm/mipi-dsi: use correct return type for the DSC functions, Dmitry Baryshkov
    • Re: [PATCH v3 2/4] drm/mipi-dsi: use correct return type for the DSC functions, Marijn Suijten
  • [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext(), Dmitry Baryshkov
    • Re: [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext(), Marijn Suijten
      • Re: [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext(), Dmitry Baryshkov
  • [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
    • Re: [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver, Marijn Suijten
      • Re: [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
        • Re: [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver, Marijn Suijten
• [PATCH v2 0/3] Add sy7802 flash led driver, André Apitzsch via B4 Relay
  • [PATCH v2 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED, André Apitzsch via B4 Relay
    • Re: [PATCH v2 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED, Rob Herring
  • [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, André Apitzsch via B4 Relay
    • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, Lee Jones
      • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, André Apitzsch
        • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, Lee Jones
          • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, André Apitzsch
            • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, Lee Jones
      • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, Lee Jones
        • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, André Apitzsch
          • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, Lee Jones
    • Re: [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, Christophe JAILLET
  • [PATCH v2 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash, André Apitzsch via B4 Relay
  • Re: [PATCH v2 0/3] Add sy7802 flash led driver, Trilok Soni
    • Re: [PATCH v2 0/3] Add sy7802 flash led driver, André Apitzsch
• [PATCH] drm: ci: fix the xfails for apq8016, Abhinav Kumar
  • Re: [PATCH] drm: ci: fix the xfails for apq8016, Dmitry Baryshkov
  • Re: [PATCH] drm: ci: fix the xfails for apq8016, Abhinav Kumar
    • Re: [PATCH] drm: ci: fix the xfails for apq8016, Helen Koike
      • Re: [PATCH] drm: ci: fix the xfails for apq8016, Helen Koike
• [PATCH v3 0/9] arm64: dts: qcom: fix description of the Type-C signals, Dmitry Baryshkov
  • [PATCH v3 2/9] arm64: dts: qcom: sc8180x: correct dispcc clocks, Dmitry Baryshkov
    • Re: [PATCH v3 2/9] arm64: dts: qcom: sc8180x: correct dispcc clocks, Konrad Dybcio
  • [PATCH v3 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks, Dmitry Baryshkov
    • Re: [PATCH v3 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks, Krzysztof Kozlowski
  • [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY, Dmitry Baryshkov
    • Re: [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY, Konrad Dybcio
  • [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly, Dmitry Baryshkov
    • Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly, Bryan O'Donoghue
      • Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly, Dmitry Baryshkov
    • Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly, Konrad Dybcio
  • [PATCH v3 5/9] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings, Dmitry Baryshkov
    • Re: [PATCH v3 5/9] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings, Konrad Dybcio
  • [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly, Dmitry Baryshkov
    • Re: [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly, Konrad Dybcio
  • [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly, Dmitry Baryshkov
    • Re: [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly, Konrad Dybcio
  • [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly, Dmitry Baryshkov
    • Re: [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly, Konrad Dybcio
      • Re: [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly, Dmitry Baryshkov
  • [PATCH v3 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints, Dmitry Baryshkov
    • Re: [PATCH v3 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints, Konrad Dybcio
• [PATCH 0/2] phy: qcom-qmp-ufs: Fix PHY QMP clocks for SC7180, Danila Tikhonov
  • [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180, Danila Tikhonov
    • Re: [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180, Rob Herring
    • Re: [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180, Manivannan Sadhasivam
  • [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks, Danila Tikhonov
    • Re: [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks, Dmitry Baryshkov
    • Re: [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks, Manivannan Sadhasivam
  • Re: (subset) [PATCH 0/2] phy: qcom-qmp-ufs: Fix PHY QMP clocks for SC7180, Vinod Koul
  • Re: (subset) [PATCH 0/2] phy: qcom-qmp-ufs: Fix PHY QMP clocks for SC7180, Bjorn Andersson
• [PATCH v2 0/4] MSM8976 MDSS/GPU/WCNSS support, Adam Skladowski
  • [PATCH v2 1/4] arm64: dts: qcom: msm8976: Add IOMMU nodes, Adam Skladowski
  • [PATCH v2 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes, Adam Skladowski
    • Re: [PATCH v2 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes, Bjorn Andersson
  • [PATCH v2 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU, Adam Skladowski
    • Re: [PATCH v2 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU, Bjorn Andersson
  • [PATCH v2 4/4] arm64: dts: qcom: msm8976: Add WCNSS node, Adam Skladowski
    • Re: [PATCH v2 4/4] arm64: dts: qcom: msm8976: Add WCNSS node, Bryan O'Donoghue
• [PATCH 1/1] clk: qcom: smd-rpm: Restore msm8976 num_clk, Adam Skladowski
  • Re: [PATCH 1/1] clk: qcom: smd-rpm: Restore msm8976 num_clk, Konrad Dybcio
  • Re: (subset) [PATCH 1/1] clk: qcom: smd-rpm: Restore msm8976 num_clk, Bjorn Andersson
• [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust, Manivannan Sadhasivam
  • [PATCH v2 01/10] PCI: qcom-ep: Disable resources unconditionally during PERST# assert, Manivannan Sadhasivam
  • [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events, Manivannan Sadhasivam
    • Re: [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events, Damien Le Moal
      • Re: [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events, Manivannan Sadhasivam
        • Re: [PATCH v2 02/10] PCI: endpoint: Decouple EPC and PCIe bus specific events, Damien Le Moal
  • [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init(), Manivannan Sadhasivam
    • Re: [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init(), Niklas Cassel
      • Re: [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init(), Manivannan Sadhasivam
        • Re: [PATCH v2 03/10] PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to init(), Manivannan Sadhasivam
  • [PATCH v2 04/10] PCI: epf-test: Refactor pci_epf_test_unbind() function, Manivannan Sadhasivam
  • [PATCH v2 05/10] PCI: epf-{mhi/test}: Move DMA initialization to EPC init callback, Manivannan Sadhasivam
  • [PATCH v2 06/10] PCI: endpoint: Introduce EPC 'deinit' event and notify the EPF drivers, Manivannan Sadhasivam
  • [PATCH v2 07/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event, Manivannan Sadhasivam
    • Re: [PATCH v2 07/10] PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event, Niklas Cassel
  • [PATCH v2 08/10] PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event, Manivannan Sadhasivam
  • [PATCH v2 09/10] PCI: epf-test: Handle Link Down event, Manivannan Sadhasivam
  • [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Manivannan Sadhasivam
    • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Niklas Cassel
      • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Manivannan Sadhasivam
        • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Niklas Cassel
          • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Bjorn Helgaas
          • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Manivannan Sadhasivam
            • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Niklas Cassel
              • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Niklas Cassel
                • Re: [PATCH v2 10/10] PCI: qcom: Implement shutdown() callback to properly reset the endpoint devices, Manivannan Sadhasivam
  • Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust, Niklas Cassel
    • Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust, Manivannan Sadhasivam
      • Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust, Niklas Cassel
  • Re: [PATCH v2 00/10] PCI: endpoint: Make host reboot handling more robust, Niklas Cassel
• [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5, Manivannan Sadhasivam
  • Re: [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5, Amit Pundir
  • Re: [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5, Konrad Dybcio
    • Re: [PATCH] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5, Manivannan Sadhasivam
• [PATCH v2 0/2] Add DT support for video clock controller on SM8150, Satya Priya Kakitapalli
  • [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings, Satya Priya Kakitapalli
    • Re: [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings, Rob Herring
      • Re: [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings, Satya Priya Kakitapalli (Temp)
  • [PATCH v2 2/2] arm64: dts: qcom: sm8150: Add video clock controller node, Satya Priya Kakitapalli
• [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support, Tengfei Fan
  • [PATCH v6 RESEND 1/4] dt-bindings: arm: qcom: Document QCS8550 SoC and the AIM300 AIoT board, Tengfei Fan
  • [PATCH v6 RESEND 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi, Tengfei Fan
    • Re: [PATCH v6 RESEND 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi, Dmitry Baryshkov
  • [PATCH v6 RESEND 3/4] arm64: dts: qcom: add base AIM300 dtsi, Tengfei Fan
  • [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT, Tengfei Fan
    • Re: [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT, Dmitry Baryshkov
      • Re: [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT, Tengfei Fan
  • Re: [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support, Trilok Soni
    • Re: [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support, Tengfei Fan
• [PATCH v8 0/3] Add support for vibrator in multiple PMICs, Fenglin Wu via B4 Relay
  • [PATCH v8 2/3] dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module, Fenglin Wu via B4 Relay
  • [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support, Fenglin Wu via B4 Relay
    • Re: [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support, Konrad Dybcio
      • Re: [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support, Fenglin Wu
      • Re: [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support, Fenglin Wu
  • [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator, Fenglin Wu via B4 Relay
    • Re: [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator, Konrad Dybcio
      • Re: [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator, Fenglin Wu
• [PATCH] docs: submitting-patches: describe additional tags, Dmitry Baryshkov
  • Re: [PATCH] docs: submitting-patches: describe additional tags, Nikita Travkin
  • Re: [PATCH] docs: submitting-patches: describe additional tags, Bjorn Andersson
    • Re: [PATCH] docs: submitting-patches: describe additional tags, Dmitry Baryshkov
• [PATCH v5 00/18] drm/msm: generate register header files, Dmitry Baryshkov
  • [PATCH v5 01/18] drm/msm/mdp5: add writeback block bases, Dmitry Baryshkov
  • [PATCH v5 02/18] drm/msm/hdmi: drop qfprom.xml.h, Dmitry Baryshkov
  • [PATCH v5 04/18] drm/msm: move msm_gpummu.c to adreno/a2xx_gpummu.c, Dmitry Baryshkov
  • [PATCH v5 03/18] drm/msm/dsi: drop mmss_cc.xml.h, Dmitry Baryshkov
  • [PATCH v5 05/18] drm/msm: remove dependencies from core onto adreno headers, Dmitry Baryshkov
  • [PATCH v5 10/18] drm/msm: import gen_header.py script from Mesa, Dmitry Baryshkov
  • [PATCH v5 11/18] drm/msm: generate headers on the fly, Dmitry Baryshkov
    • Re: [PATCH v5 11/18] drm/msm: generate headers on the fly, Jon Hunter
      • Re: [PATCH v5 11/18] drm/msm: generate headers on the fly, Dmitry Baryshkov
        • Re: [PATCH v5 11/18] drm/msm: generate headers on the fly, Jon Hunter
  • [PATCH v5 06/18] drm/msm: import XML display registers database, Dmitry Baryshkov
  • [PATCH v5 08/18] drm/msm: import A5xx XML display registers database, Dmitry Baryshkov
  • [PATCH v5 17/18] drm/msm: drop C++ parts of a6xx.xml.h, Dmitry Baryshkov
  • [PATCH v5 16/18] drm/msm: drop A6xx GMU header, Dmitry Baryshkov
  • [PATCH v5 09/18] drm/msm: import A6xx XML display registers database, Dmitry Baryshkov
    • Re: [PATCH v5 09/18] drm/msm: import A6xx XML display registers database, Connor Abbott
      • Re: [PATCH v5 09/18] drm/msm: import A6xx XML display registers database, Dmitry Baryshkov
  • [PATCH v5 15/18] drm/msm: drop A5xx header, Dmitry Baryshkov
  • [PATCH v5 13/18] drm/msm: drop A2xx and common headers, Dmitry Baryshkov
  • [PATCH v5 07/18] drm/msm: import A2xx-A4xx XML display registers database, Dmitry Baryshkov
  • [PATCH v5 14/18] drm/msm: drop A3xx and A4xx headers, Dmitry Baryshkov
  • [PATCH v5 12/18] drm/msm: drop display-related headers, Dmitry Baryshkov
  • [PATCH v5 18/18] drm/msm: drop A6xx header, Dmitry Baryshkov
• [PATCH v4 0/2] rtc-pm8xxx: fix rtc alarm which fired before driver probe not be cleard, jianbin zhang
  • [PATCH V4 1/2] rtc-pm8xxx: clear the triggered alarm interrupt during driver probe, jianbin zhang
    • Re: [PATCH V4 1/2] rtc-pm8xxx: clear the triggered alarm interrupt during driver probe, Bjorn Andersson
      • Re: [PATCH V4 1/2] rtc-pm8xxx: clear the triggered alarm interrupt during driver probe, jianbin zhang
  • [PATCH V4 2/2] rtc-pm8xxx: Correct the value written into the PM8xxx_RTC_ALARM_CLEAR, jianbin zhang
    • Re: [PATCH V4 2/2] rtc-pm8xxx: Correct the value written into the PM8xxx_RTC_ALARM_CLEAR, Bjorn Andersson
      • Re: [PATCH V4 2/2] rtc-pm8xxx: Correct the value written into the PM8xxx_RTC_ALARM_CLEAR, jianbin zhang
• [PATCH 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge, Dmitry Baryshkov
  • [PATCH 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996, Dmitry Baryshkov
    • Re: [PATCH 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996, Rob Herring
  • [PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes, Dmitry Baryshkov
    • Re: [PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes, Konrad Dybcio
  • [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes, Dmitry Baryshkov
    • Re: [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes, Konrad Dybcio
      • Re: [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes, Dmitry Baryshkov
• [PATCH v2] drm/bridge: adv7511: make it honour next bridge in DT, Dmitry Baryshkov
  • Re: [PATCH v2] drm/bridge: adv7511: make it honour next bridge in DT, Neil Armstrong
  • Re: [PATCH v2] drm/bridge: adv7511: make it honour next bridge in DT, Neil Armstrong
• [PATCH v3 0/2] Samsung Galaxy Z Fold5 initial support, Alexandru Marc Serdeliuc via B4 Relay
  • [PATCH v3 1/2] dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
    • Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5, Rob Herring
  • [PATCH v3 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
    • Re: [PATCH v3 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5, neil . armstrong
      • Re: [PATCH v3 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5, Alexandru Serdeliuc
• [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals, Dmitry Baryshkov
  • [PATCH v2 1/7] arm64: dts: qcom: sm8250: describe HS signals properly, Dmitry Baryshkov
  • [PATCH v2 2/7] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY, Dmitry Baryshkov
  • [PATCH v2 3/7] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings, Dmitry Baryshkov
  • [PATCH v2 4/7] arm64: dts: qcom: sc8180x: describe USB signals properly, Dmitry Baryshkov
  • [PATCH v2 5/7] arm64: dts: qcom: sc8280xp: describe USB signals properly, Dmitry Baryshkov
  • [PATCH v2 7/7] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints, Dmitry Baryshkov
  • [PATCH v2 6/7] arm64: dts: qcom: x1e80100: describe USB signals properly, Dmitry Baryshkov
  • Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals, Rob Herring
    • Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals, Dmitry Baryshkov
• [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema, Dmitry Baryshkov
  • Re: [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema, Greg Kroah-Hartman
    • Re: [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema, Conor Dooley
• [PATCH 0/7] clk: qcom: Add support for DISPCC, CAMCC and GPUCC on SM4450, Ajit Pandey
  • [PATCH 2/7] dt-bindings: clock: qcom: Add DISPCC clocks for SM4450, Ajit Pandey
    • Re: [PATCH 2/7] dt-bindings: clock: qcom: Add DISPCC clocks for SM4450, Krzysztof Kozlowski
      • Re: [PATCH 2/7] dt-bindings: clock: qcom: Add DISPCC clocks for SM4450, Ajit Pandey
        • Re: [PATCH 2/7] dt-bindings: clock: qcom: Add DISPCC clocks for SM4450, Krzysztof Kozlowski
  • [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Ajit Pandey
    • Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Krzysztof Kozlowski
      • Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Ajit Pandey
        • Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Krzysztof Kozlowski
          • Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Dmitry Baryshkov
            • Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Krzysztof Kozlowski
              • Re: [PATCH 1/7] clk: qcom: clk-alpha-pll: Fix CAL_L_VAL override for LUCID EVO PLL, Ajit Pandey
  • [PATCH 3/7] clk: qcom: Add DISPCC driver support for SM4450, Ajit Pandey
    • Re: [PATCH 3/7] clk: qcom: Add DISPCC driver support for SM4450, Dmitry Baryshkov
      • Re: [PATCH 3/7] clk: qcom: Add DISPCC driver support for SM4450, Ajit Pandey
  • [PATCH 4/7] dt-bindings: clock: qcom: Add CAMCC clocks for SM4450, Ajit Pandey
    • Re: [PATCH 4/7] dt-bindings: clock: qcom: Add CAMCC clocks for SM4450, Krzysztof Kozlowski
  • [PATCH 5/7] clk: qcom: Add CAMCC driver support for SM4450, Ajit Pandey
    • Re: [PATCH 5/7] clk: qcom: Add CAMCC driver support for SM4450, Dmitry Baryshkov
  • [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450, Ajit Pandey
    • Re: [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450, Krzysztof Kozlowski
      • Re: [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450, Krzysztof Kozlowski
        • Re: [PATCH 6/7] dt-bindings: clock: qcom: Add GPUCC clocks for SM4450, Ajit Pandey
  • [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Ajit Pandey
    • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Dmitry Baryshkov
      • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Ajit Pandey
        • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Dmitry Baryshkov
          • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Ajit Pandey
            • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Dmitry Baryshkov
              • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, Ajit Pandey
    • Re: [PATCH 7/7] clk: qcom: Add GPUCC driver support for SM4450, kernel test robot
• [PATCH v2 0/3] drm/panel: add support for LG SW43408 panel, Dmitry Baryshkov
  • [PATCH v2 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Dmitry Baryshkov
    • Re: [PATCH v2 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Krzysztof Kozlowski
  • [PATCH v2 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw(), Dmitry Baryshkov
  • [PATCH v2 3/3] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
• [PATCH v2 1/2] arm64: dts: qcom: pm6150: correct Type-C compatible, Krzysztof Kozlowski
  • [PATCH v2 2/2] arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible, Krzysztof Kozlowski
    • Re: [PATCH v2 2/2] arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible, Konrad Dybcio
  • Re: [PATCH v2 1/2] arm64: dts: qcom: pm6150: correct Type-C compatible, Konrad Dybcio
  • Re: (subset) [PATCH v2 1/2] arm64: dts: qcom: pm6150: correct Type-C compatible, Bjorn Andersson
• [PATCH 0/3] drm/panel: add support for LG SW43408 panel, Dmitry Baryshkov
  • [PATCH 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Dmitry Baryshkov
    • Re: [PATCH 1/3] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel, Krzysztof Kozlowski
  • [PATCH 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw(), Dmitry Baryshkov
    • Re: [PATCH 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw(), Marijn Suijten
  • [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
    • Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Marijn Suijten
      • Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
        • Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Marijn Suijten
          • Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
            • Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Marijn Suijten
              • Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver, Dmitry Baryshkov
• [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible, Dmitry Baryshkov
  • Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible, Marijn Suijten
    • Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible, Marijn Suijten
  • Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible, Abhinav Kumar
  • Re: [PATCH] drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible, Abhinav Kumar
• [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Dmitry Baryshkov
  • Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Marijn Suijten
    • Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Abhinav Kumar
    • Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Dmitry Baryshkov
      • Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Luca Weiss
        • Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Dmitry Baryshkov
          • Re: [PATCH] drm/msm/dpu: fix vblank IRQ handling for command panels, Caleb Connolly
• [PATCH v4 0/5] LLCC: Support for Broadcast_AND region, Unnathi Chalicheemala
  • [PATCH v4 5/5] arm64: dts: qcom: sm8650: Add Broadcast_AND register in LLCC block, Unnathi Chalicheemala
  • [PATCH v4 4/5] arm64: dts: qcom: sm8550: Add Broadcast_AND register in LLCC block, Unnathi Chalicheemala
  • [PATCH v4 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register, Unnathi Chalicheemala
    • Re: [PATCH v4 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register, Krzysztof Kozlowski
  • [PATCH v4 3/5] arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region, Unnathi Chalicheemala
  • [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region, Unnathi Chalicheemala
    • Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region, Bjorn Andersson
    • Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region, Krzysztof Kozlowski
      • Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region, Unnathi Chalicheemala
        • Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region, Konrad Dybcio
          • Re: [PATCH v4 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region, Unnathi Chalicheemala
  • Re: [PATCH v4 0/5] LLCC: Support for Broadcast_AND region, Krzysztof Kozlowski
• [PATCH v7 0/7] Add support for Translation Buffer Units, Georgi Djakov
  • [PATCH v7 6/7] iommu/arm-smmu-qcom: Use the custom fault handler on more platforms, Georgi Djakov
  • [PATCH v7 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs, Georgi Djakov
    • Re: [PATCH v7 5/7] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs, Konrad Dybcio
  • [PATCH v7 4/7] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845, Georgi Djakov
  • [PATCH v7 3/7] iommu/arm-smmu: Allow using a threaded handler for context interrupts, Georgi Djakov
  • [PATCH v7 1/7] dt-bindings: iommu: Add Qualcomm TBU, Georgi Djakov
  • [PATCH v7 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs, Georgi Djakov
    • Re: [PATCH v7 7/7] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs, Konrad Dybcio
  • [PATCH v7 2/7] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver, Georgi Djakov
    • Re: [PATCH v7 2/7] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver, Will Deacon
    • Re: [PATCH v7 2/7] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver, Konrad Dybcio
• [PATCH v5 00/11] scsi: ufs: Remove overzealous memory barriers, Andrew Halaney
  • [PATCH v5 01/11] scsi: ufs: qcom: Perform read back after writing reset bit, Andrew Halaney
  • [PATCH v5 02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US, Andrew Halaney
    • Re: [PATCH v5 02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US, Manivannan Sadhasivam
  • [PATCH v5 03/11] scsi: ufs: qcom: Remove unnecessary mb() after writing testbus config, Andrew Halaney
    • Re: [PATCH v5 03/11] scsi: ufs: qcom: Remove unnecessary mb() after writing testbus config, Manivannan Sadhasivam
  • [PATCH v5 04/11] scsi: ufs: qcom: Perform read back after writing unipro mode, Andrew Halaney
    • Re: [PATCH v5 04/11] scsi: ufs: qcom: Perform read back after writing unipro mode, Manivannan Sadhasivam
  • [PATCH v5 05/11] scsi: ufs: qcom: Perform read back after writing CGC enable, Andrew Halaney
  • [PATCH v5 06/11] scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV, Andrew Halaney
    • Re: [PATCH v5 06/11] scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV, Bart Van Assche
  • [PATCH v5 07/11] scsi: ufs: core: Perform read back after writing UTP_TASK_REQ_LIST_BASE_H, Andrew Halaney
  • [PATCH v5 08/11] scsi: ufs: core: Perform read back after disabling interrupts, Andrew Halaney
  • [PATCH v5 09/11] scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL, Andrew Halaney
  • [PATCH v5 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell, Andrew Halaney
    • Re: [PATCH v5 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell, Bart Van Assche
    • Re: [PATCH v5 10/11] scsi: ufs: core: Remove unnecessary wmb() after ringing doorbell, Manivannan Sadhasivam
  • [PATCH v5 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs, Andrew Halaney
    • Re: [PATCH v5 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs, Bart Van Assche
    • Re: [PATCH v5 11/11] scsi: ufs: core: Remove unnecessary wmb() prior to writing run/stop regs, Manivannan Sadhasivam
  • Re: [PATCH v5 00/11] scsi: ufs: Remove overzealous memory barriers, Martin K. Petersen
  • Re: [PATCH v5 00/11] scsi: ufs: Remove overzealous memory barriers, Martin K. Petersen
• [PATCH] firmware: qcom: uefisecapp: Fix memory related IO errors and crashes, Maximilian Luz
  • Re: [PATCH] firmware: qcom: uefisecapp: Fix memory related IO errors and crashes, Johan Hovold
    • Re: [PATCH] firmware: qcom: uefisecapp: Fix memory related IO errors and crashes, Maximilian Luz
• [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Kuogee Hsieh
  • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Kuogee Hsieh
    • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Dmitry Baryshkov
  • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Stephen Boyd
    • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Abhinav Kumar
      • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Stephen Boyd
        • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Abhinav Kumar
          • Re: [PATCH v3] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Stephen Boyd
• [PATCH v3] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table, Kuogee Hsieh
  • Re: [PATCH v3] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table, Kuogee Hsieh
    • Re: [PATCH v3] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table, Dmitry Baryshkov
  • Re: [PATCH v3] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table, Abhinav Kumar
• [PATCH v7 0/6] spmi: pmic-arb: Add support for multiple buses, Abel Vesa
  • [PATCH v7 1/6] dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema, Abel Vesa
  • [PATCH v7 2/6] dt-bindings: spmi: Deprecate qcom,bus-id, Abel Vesa
  • [PATCH v7 3/6] spmi: pmic-arb: Make the APID init a version operation, Abel Vesa
    • Re: [PATCH v7 3/6] spmi: pmic-arb: Make the APID init a version operation, Neil Armstrong
  • [PATCH v7 4/6] spmi: pmic-arb: Make core resources acquiring a version operation, Abel Vesa
  • [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support, Abel Vesa
    • Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support, Neil Armstrong
      • Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support, Abel Vesa
        • Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support, Neil Armstrong
  • [PATCH v7 5/6] spmi: pmic-arb: Register controller for bus instead of arbiter, Abel Vesa
    • Re: [PATCH v7 5/6] spmi: pmic-arb: Register controller for bus instead of arbiter, Neil Armstrong
• [PATCH v2] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table, Kuogee Hsieh
  • Re: [PATCH v2] drm/msm/dp: assign correct DP controller ID to x1e80100 interface table, Dmitry Baryshkov
• [PATCH v2] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Kuogee Hsieh
  • Re: [PATCH v2] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Abhinav Kumar
• [PATCH v10 0/3] arm64: qcom: sa8775p: add support for EP PCIe, Mrinmay Sarkar
  • [PATCH v10 2/3] PCI: qcom-ep: Add support for SA8775P SOC, Mrinmay Sarkar
    • Re: [PATCH v10 2/3] PCI: qcom-ep: Add support for SA8775P SOC, Konrad Dybcio
      • Re: [PATCH v10 2/3] PCI: qcom-ep: Add support for SA8775P SOC, Mrinmay Sarkar
  • [PATCH v10 3/3] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node, Mrinmay Sarkar
  • [PATCH v10 1/3] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC, Mrinmay Sarkar
• [PATCH AUTOSEL 6.6 27/75] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.1 05/52] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY, Sasha Levin
• [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support, Sasha Levin
  • Re: [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support, Konrad Dybcio
    • Re: [PATCH AUTOSEL 6.1 04/52] arm64: dts: qcom: sdm630: add USB QMP PHY support, Sasha Levin
• [PATCH AUTOSEL 6.6 26/75] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.6 25/75] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.6 06/75] arm64: dts: qcom: sdm630: add USB QMP PHY support, Sasha Levin
• [PATCH AUTOSEL 6.6 07/75] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY, Sasha Levin
• [PATCH AUTOSEL 6.8 39/98] arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 38/98] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 37/98] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
  • Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Johan Hovold
    • Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Krzysztof Kozlowski
      • Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 33/98] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected, Sasha Levin
• [PATCH AUTOSEL 6.8 13/98] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S, Sasha Levin
• [PATCH AUTOSEL 6.8 12/98] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY, Sasha Levin
• [PATCH AUTOSEL 6.8 11/98] arm64: dts: qcom: sdm630: add USB QMP PHY support, Sasha Levin
• [PATCH AUTOSEL 6.8 08/98] scsi: ufs: qcom: Avoid re-init quirk when gears match, Sasha Levin
• [PATCH AUTOSEL 6.6 24/52] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.6 23/52] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.6 22/52] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators, Umang Chheda
  • Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators, Elliot Berman
    • Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators, Bjorn Andersson
      • Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add change to name the regulators, Umang Chheda
• [PATCH AUTOSEL 6.8 35/68] arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 34/68] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 33/68] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 32/68] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names, Sasha Levin
• [PATCH AUTOSEL 6.8 29/68] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected, Sasha Levin
• [PATCH AUTOSEL 6.8 16/68] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains, Sasha Levin
• [PATCH AUTOSEL 6.8 13/68] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs, Sasha Levin
• [PATCH AUTOSEL 6.8 06/68] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S, Sasha Levin
• [PATCH v2 0/3] Add TCPM support for PM7250B and Fairphone 4, Luca Weiss
  • [PATCH v2 1/3] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster, Luca Weiss
  • [PATCH v2 2/3] arm64: dts: qcom: pm7250b: Add a TCPM description, Luca Weiss
    • Re: [PATCH v2 2/3] arm64: dts: qcom: pm7250b: Add a TCPM description, Bjorn Andersson
  • [PATCH v2 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching, Luca Weiss
    • Re: [PATCH v2 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB role switching, Konrad Dybcio
  • Re: [PATCH v2 0/3] Add TCPM support for PM7250B and Fairphone 4, Bjorn Andersson
• [PATCH v2 0/3] DisplayPort support for SM6350/SM7225, Luca Weiss
  • [PATCH v2 1/3] dt-bindings: display: msm: dp-controller: document SM6350 compatible, Luca Weiss
  • [PATCH v2 2/3] dt-bindings: display: msm: sm6350-mdss: document DP controller subnode, Luca Weiss
    • Re: [PATCH v2 2/3] dt-bindings: display: msm: sm6350-mdss: document DP controller subnode, Krzysztof Kozlowski
  • [PATCH v2 3/3] arm64: dts: qcom: sm6350: Add DisplayPort controller, Luca Weiss
    • Re: [PATCH v2 3/3] arm64: dts: qcom: sm6350: Add DisplayPort controller, Konrad Dybcio
  • Re: (subset) [PATCH v2 0/3] DisplayPort support for SM6350/SM7225, Bjorn Andersson
• [PATCH v2 00/11] usb: typec: ucsi: fix several issues manifesting on Qualcomm platforms, Dmitry Baryshkov
  • [PATCH v2 01/11] usb: typec: ucsi: allow non-partner GET_PDOS for Qualcomm devices, Dmitry Baryshkov
  • [PATCH v2 02/11] usb: typec: ucsi: limit the UCSI_NO_PARTNER_PDOS even further, Dmitry Baryshkov
  • [PATCH v2 03/11] usb: typec: ucsi: properly register partner's PD device, Dmitry Baryshkov
  • [PATCH v2 04/11] usb: typec: ucsi: always register a link to USB PD device, Dmitry Baryshkov
    • Re: [PATCH v2 04/11] usb: typec: ucsi: always register a link to USB PD device, Heikki Krogerus
  • [PATCH v2 05/11] usb: typec: ucsi: simplify partner's PD caps registration, Dmitry Baryshkov
    • Re: [PATCH v2 05/11] usb: typec: ucsi: simplify partner's PD caps registration, Heikki Krogerus
  • [PATCH v2 07/11] usb: typec: ucsi: support delaying GET_PDOS for device, Dmitry Baryshkov
    • Re: [PATCH v2 07/11] usb: typec: ucsi: support delaying GET_PDOS for device, Heikki Krogerus
  • [PATCH v2 10/11] soc: qcom: pmic_glink: reenable UCSI on sc8280xp, Dmitry Baryshkov
  • [PATCH v2 09/11] usb: typec: ucsi_glink: enable the UCSI_DELAY_DEVICE_PDOS quirk, Dmitry Baryshkov
    • Re: [PATCH v2 09/11] usb: typec: ucsi_glink: enable the UCSI_DELAY_DEVICE_PDOS quirk, Heikki Krogerus
  • [PATCH v2 11/11] soc: qcom: pmic_glink: enable UCSI on sc8180x, Dmitry Baryshkov
    • Re: [PATCH v2 11/11] soc: qcom: pmic_glink: enable UCSI on sc8180x, Heikki Krogerus
  • [PATCH v2 06/11] usb: typec: ucsi: extract code to read PD caps, Dmitry Baryshkov
    • Re: [PATCH v2 06/11] usb: typec: ucsi: extract code to read PD caps, Heikki Krogerus
  • [PATCH v2 08/11] usb: typec: ucsi_glink: rework quirks implementation, Dmitry Baryshkov
    • Re: [PATCH v2 08/11] usb: typec: ucsi_glink: rework quirks implementation, Heikki Krogerus
• [PATCH] drm/msm/dp: Remove now unused connector_type from desc, Bjorn Andersson
  • Re: [PATCH] drm/msm/dp: Remove now unused connector_type from desc, Dmitry Baryshkov
    • Re: [PATCH] drm/msm/dp: Remove now unused connector_type from desc, Bjorn Andersson
• [PATCH 0/2] V2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
  • [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
    • Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Konrad Dybcio
      • Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Serdeliuc
      • Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Serdeliuc
    • Re: [PATCH 2/2] v2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Krzysztof Kozlowski
  • [PATCH 1/2] V2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
    • Re: [PATCH 1/2] V2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Konrad Dybcio
      • Re: [PATCH 1/2] V2 arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Serdeliuc
• [PATCH v5 0/4] Dynamic Allocation of the reserved_mem array, Oreoluwa Babatunde
  • [PATCH v5 4/4] of: reserved_mem: Rename fdt_* functions to refelct use of unflatten_devicetree APIs, Oreoluwa Babatunde
  • [PATCH v5 1/4] of: reserved_mem: Restruture how the reserved memory regions are processed, Oreoluwa Babatunde
  • [PATCH v5 3/4] of: reserved_mem: Use the unflatten_devicetree APIs to scan reserved mem. nodes, Oreoluwa Babatunde
    • Re: [PATCH v5 3/4] of: reserved_mem: Use the unflatten_devicetree APIs to scan reserved mem. nodes, Rob Herring
      • Re: [PATCH v5 3/4] of: reserved_mem: Use the unflatten_devicetree APIs to scan reserved mem. nodes, Oreoluwa Babatunde
  • [PATCH v5 2/4] of: reserved_mem: Add code to dynamically allocate reserved_mem array, Oreoluwa Babatunde
• [PATCH v1] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Kuogee Hsieh
  • Re: [PATCH v1] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Abhinav Kumar
    • Re: [PATCH v1] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Dmitry Baryshkov
  • Re: [PATCH v1] phy/qcom-qmp-combo: propagate correct return value at phy_power_on(), Stephen Boyd
• [PATCH v1] drm/msm/dp: assign correct DP controller ID to interface table, Kuogee Hsieh
  • [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Kuogee Hsieh
    • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
      • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Stephen Boyd
        • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
          • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Dmitry Baryshkov
            • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
              • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Dmitry Baryshkov
                • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
                  • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Dmitry Baryshkov
                    • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
                      • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
          • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Bjorn Andersson
            • Re: [PATCH v1] drm/msm/dp: use dp_hpd_plug_handle() and dp_hpd_unplug_handle() directly, Abhinav Kumar
  • Re: [PATCH v1] drm/msm/dp: assign correct DP controller ID to interface table, Abhinav Kumar
  • Re: [PATCH v1] drm/msm/dp: assign correct DP controller ID to interface table, Abel Vesa
• [PATCH v2 0/3] Work around missing MSA_READY indicator for msm8998 devices, Marc Gonzalez
  • [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop, Marc Gonzalez
    • Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop, Krzysztof Kozlowski
      • Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop, Krzysztof Kozlowski
        • Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop, Marc Gonzalez
          • Re: [PATCH v2 1/3] dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop, Krzysztof Kozlowski
  • [PATCH v2 2/3] wifi: ath10k: fake missing MSA_READY indicator, Marc Gonzalez
  • [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
    • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Krzysztof Kozlowski
      • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Konrad Dybcio
        • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
          • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Dmitry Baryshkov
            • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Jeff Johnson
              • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Dmitry Baryshkov
            • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Alexey Minnekhanov
              • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Dmitry Baryshkov
              • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Jeff Johnson
            • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
              • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Dmitry Baryshkov
                • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
              • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Krzysztof Kozlowski
            • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Kalle Valo
              • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
                • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Dmitry Baryshkov
                • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Kalle Valo
                  • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
                    • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Kalle Valo
                      • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Marc Gonzalez
                        • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Kalle Valo
                          • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Conor Dooley
                            • Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi, Kalle Valo
• [PATCH] arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
  • Re: [PATCH] arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Krzysztof Kozlowski
  • Re: [PATCH] arm64: dts: qcom: Add support for Samsung Galaxy Z Fold5, Rob Herring
• [PATCH v2 0/6] drm/msm/dp: Spring cleaning, Bjorn Andersson
  • [PATCH v2 1/6] drm/msm/dp: Drop unused dp_debug struct, Bjorn Andersson
    • Re: [PATCH v2 1/6] drm/msm/dp: Drop unused dp_debug struct, Dmitry Baryshkov
  • [PATCH v2 2/6] drm/msm/dp: Removed fixed nvid "support", Bjorn Andersson
  • [PATCH v2 3/6] drm/msm/dp: Remove unused defines and members, Bjorn Andersson
  • [PATCH v2 4/6] drm/msm/dp: Use function arguments for aux writes, Bjorn Andersson
  • [PATCH v2 5/6] drm/msm/dp: Use function arguments for timing configuration, Bjorn Andersson
  • [PATCH v2 6/6] drm/msm/dp: Use function arguments for audio operations, Bjorn Andersson
    • Re: [PATCH v2 6/6] drm/msm/dp: Use function arguments for audio operations, Abhinav Kumar
      • Re: [PATCH v2 6/6] drm/msm/dp: Use function arguments for audio operations, Bjorn Andersson
• [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Alexandru Marc Serdeliuc via B4 Relay
  • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Konrad Dybcio
    • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Alexandru Serdeliuc
      • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Konrad Dybcio
        • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Alexandru Serdeliuc
          • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Konrad Dybcio
            • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Alexandru Serdeliuc
  • Re: [PATCH] dt-bindings: arm: qcom: Add Samsung Galaxy Z Fold5, Krzysztof Kozlowski
• [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Mukesh Kumar Savaliya
  • Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Andi Shyti
    • Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Mukesh Kumar Savaliya
  • Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Bjorn Andersson
    • Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage, Mukesh Kumar Savaliya
• [PATCH 1/3] drm/msm/dpu: fix DSC for DSI video mode, Jun Nie
  • [PATCH 2/3] dt-bindings: display: panel: visionox,vtdr6130: Add mode property, Jun Nie
    • Re: [PATCH 2/3] dt-bindings: display: panel: visionox,vtdr6130: Add mode property, Dmitry Baryshkov
    • Re: [PATCH 2/3] dt-bindings: display: panel: visionox, vtdr6130: Add mode property, Krzysztof Kozlowski
  • [PATCH 3/3] drm/panel: Enable DSC for Visionox VTDR6130 panel, Jun Nie
    • Re: [PATCH 3/3] drm/panel: Enable DSC for Visionox VTDR6130 panel, Dmitry Baryshkov
  • Re: [PATCH 1/3] drm/msm/dpu: fix DSC for DSI video mode, Dmitry Baryshkov
    • Re: [PATCH 1/3] drm/msm/dpu: fix DSC for DSI video mode, Jun Nie
      • Re: [PATCH 1/3] drm/msm/dpu: fix DSC for DSI video mode, Dmitry Baryshkov
• [PATCH 0/5] qcom: x1e80100: Enable CPUFreq, Sibi Sankar
  • [PATCH 1/5] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings, Sibi Sankar
    • Re: [PATCH 1/5] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings, Rob Herring
  • [PATCH 2/5] mailbox: Add support for QTI CPUCP mailbox controller, Sibi Sankar
    • Re: [PATCH 2/5] mailbox: Add support for QTI CPUCP mailbox controller, Dmitry Baryshkov
      • Re: [PATCH 2/5] mailbox: Add support for QTI CPUCP mailbox controller, Sibi Sankar
        • Re: [PATCH 2/5] mailbox: Add support for QTI CPUCP mailbox controller, Dmitry Baryshkov
          • Re: [PATCH 2/5] mailbox: Add support for QTI CPUCP mailbox controller, Sibi Sankar
  • [PATCH 4/5] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes, Sibi Sankar
    • Re: [PATCH 4/5] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes, Dmitry Baryshkov
      • Re: [PATCH 4/5] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes, Sibi Sankar
  • [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq, Sibi Sankar
    • Re: [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq, Sudeep Holla
      • Re: [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq, Ulf Hansson
        • Re: [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq, Sibi Sankar
  • [PATCH 3/5] arm64: dts: qcom: x1e80100: Resize GIC Redistributor register region, Sibi Sankar
    • Re: [PATCH 3/5] arm64: dts: qcom: x1e80100: Resize GIC Redistributor register region, Dmitry Baryshkov
• [PATCH 0/3] DisplayPort support for SM6350/SM7225, Luca Weiss
  • [PATCH 1/3] dt-bindings: display: msm: dp-controller: document SM8250 compatible, Luca Weiss
    • Re: [PATCH 1/3] dt-bindings: display: msm: dp-controller: document SM8250 compatible, Luca Weiss
    • Re: [PATCH 1/3] dt-bindings: display: msm: dp-controller: document SM8250 compatible, Rob Herring
  • [PATCH 2/3] dt-bindings: display: msm: sm6350-mdss: document DP controller subnode, Luca Weiss
    • Re: [PATCH 2/3] dt-bindings: display: msm: sm6350-mdss: document DP controller subnode, Rob Herring
  • [PATCH 3/3] arm64: dts: qcom: sm6350: Add DisplayPort controller, Luca Weiss
    • Re: [PATCH 3/3] arm64: dts: qcom: sm6350: Add DisplayPort controller, Dmitry Baryshkov
• [PATCH v4 0/5] clk: qcom: apss-ipq-pll: various cleanups, Gabor Juhos
  • [PATCH v4 1/5] clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs', Gabor Juhos
  • [PATCH v4 2/5] clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs', Gabor Juhos
  • [PATCH v4 3/5] clk: qcom: apss-ipq-pll: constify match data structures, Gabor Juhos
  • [PATCH v4 4/5] clk: qcom: apss-ipq-pll: constify clk_init_data structures, Gabor Juhos
  • [PATCH v4 5/5] clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll, Gabor Juhos
  • Re: [PATCH v4 0/5] clk: qcom: apss-ipq-pll: various cleanups, Bjorn Andersson
• [PATCH] drm/msm/adreno: Set highest_bank_bit for A619, Luca Weiss
• [PATCH v5 0/5] Add interconnect driver for IPQ9574 SoC, Varadarajan Narayanan
  • [PATCH v5 1/5] dt-bindings: interconnect: Add Qualcomm IPQ9574 support, Varadarajan Narayanan
    • Re: [PATCH v5 1/5] dt-bindings: interconnect: Add Qualcomm IPQ9574 support, Krzysztof Kozlowski
  • [PATCH v5 2/5] interconnect: icc-clk: Add devm_icc_clk_register, Varadarajan Narayanan
  • [PATCH v5 3/5] clk: qcom: common: Add interconnect clocks support, Varadarajan Narayanan
    • Re: [PATCH v5 3/5] clk: qcom: common: Add interconnect clocks support, Stephen Boyd
      • Re: [PATCH v5 3/5] clk: qcom: common: Add interconnect clocks support, Varadarajan Narayanan
        • Re: [PATCH v5 3/5] clk: qcom: common: Add interconnect clocks support, Stephen Boyd
  • [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Varadarajan Narayanan
    • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Stephen Boyd
      • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Varadarajan Narayanan
        • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Krzysztof Kozlowski
          • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Varadarajan Narayanan
            • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Krzysztof Kozlowski
              • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, Varadarajan Narayanan
    • Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks, kernel test robot
  • [PATCH v5 5/5] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc, Varadarajan Narayanan
• [PATCH v3] clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs, Gabor Juhos
  • Re: [PATCH v3] clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs, Bjorn Andersson
• [PATCH] arm64: dts: qcom: pm6150: correct Type-C compatible, Krzysztof Kozlowski
  • Re: [PATCH] arm64: dts: qcom: pm6150: correct Type-C compatible, Gabor Juhos
    • Re: [PATCH] arm64: dts: qcom: pm6150: correct Type-C compatible, Krzysztof Kozlowski
  • Re: [PATCH] arm64: dts: qcom: pm6150: correct Type-C compatible, Bjorn Andersson
• [PATCH V4 0/2] firmware: arm_scmi: Register and handle limits change notification, Sibi Sankar
  • [PATCH V4 1/2] cpufreq: Export cpufreq_update_pressure, Sibi Sankar
  • [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Sibi Sankar
    • Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Lukasz Luba
    • Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Cristian Marussi
      • Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Cristian Marussi
      • Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Sibi Sankar
    • Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Vincent Guittot
      • Re: [PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications, Sibi Sankar
• [PATCH v5] thermal/drivers/tsens: Add suspend to RAM support for tsens, Priyansh Jain
  • Re: [PATCH v5] thermal/drivers/tsens: Add suspend to RAM support for tsens, Amit Kucheria
  • Re: [PATCH v5] thermal/drivers/tsens: Add suspend to RAM support for tsens, Daniel Lezcano
• [PATCH] arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller, Maximilian Luz
  • Re: [PATCH] arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller, Bjorn Andersson
• [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS, Bjorn Andersson
  • Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS, Konrad Dybcio
  • Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS, Bjorn Andersson
• [PATCH 0/3] Add sy7802 flash led driver, André Apitzsch via B4 Relay
  • [PATCH 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED, André Apitzsch via B4 Relay
    • Re: [PATCH 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED, Rob Herring
    • Re: [PATCH 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED, Rob Herring
  • [PATCH 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash, André Apitzsch via B4 Relay
  • [PATCH 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller, André Apitzsch via B4 Relay
• [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Volodymyr Babchuk
  • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Konrad Dybcio
    • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Volodymyr Babchuk
      • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Konrad Dybcio
        • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Caleb Connolly
          • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Stephan Gerhold
            • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Stephen Boyd
              • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Elliot Berman
                • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Stephen Boyd
            • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Volodymyr Babchuk
              • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Stephan Gerhold
                • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Stephen Boyd
          • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Volodymyr Babchuk
  • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Nikita Travkin
    • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Nikita Travkin
  • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Maulik Shah (mkshah)
    • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Volodymyr Babchuk
      • Re: [PATCH] soc: qcom: cmd-db: map shared memory as WT, not WB, Maulik Shah (mkshah)