Re: [PATCH 2/2] arm64: dts: qcom: x1e80100-yoga: add wifi calibration variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16.07.2024 1:00 AM, Konrad Dybcio wrote:
> On 16.07.2024 12:01 AM, Patrick Wildt wrote:
>> Am Tue, Jul 16, 2024 at 12:51:53AM +0300 schrieb Dmitry Baryshkov:
>>> On Mon, Jul 15, 2024 at 09:40:41PM GMT, Patrick Wildt wrote:
>>>> Describe the bus topology for PCIe domain 4 and add the ath12k
>>>> calibration variant so that the board file (calibration data) can be
>>>> loaded.
>>>>
>>>> Signed-off-by: Patrick Wildt <patrick@xxxxxxxxx>
>>>> ---
>>>>  .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts      |  9 +++++++++
>>>>  arch/arm64/boot/dts/qcom/x1e80100.dtsi                 | 10 ++++++++++
>>>>  2 files changed, 19 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>>> index fbff558f5b07..f569f0fbd1fc 100644
>>>> --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>>> +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
>>>> @@ -635,6 +635,15 @@ &pcie4_phy {
>>>>  	status = "okay";
>>>>  };
>>>>  
>>>> +&pcie4_port0 {
>>>> +	wifi@0 {
>>>> +		compatible = "pci17cb,1107";
>>>> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
>>>> +
>>>> +		qcom,ath12k-calibration-variant = "LES790";
>>>
>>> It doesn't look like it follows the rest of the calibration variants.
>>>
>>> Something like "Lenovo_Y7x" or "Lenovo_Yoga7x" sounds more logical.
>>
>> This is what's both in the DSDT
>>
>>   Device (WLN)
>>   {
>>     [...]
>>     Name (BDFE, "BDF_LES790")
>>
>> and kvalo's board-2.bin for this machine:
>>
>>   $ strings board-2.bin | grep LES
>>   bus=pci,vendor=17cb,device=1107,subsystem-vendor=17aa,subsystem-device=e0e9,qmi-chip-id=2,qmi-board-id=255,variant=LES790
>>
>> I don't think we can hand-pick these strings, they come from whoever
>> decided upon them and fed them into ACPI tables and QC's binaries.
> 
> Huh, great nod from qca!
> Looks like there's even a bit more hw supported in there..
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Ref: https://git.codelinaro.org/clo/ath-firmware/ath12k-firmware/-/blob/main/WCN7850/hw2.0/board-2.bin

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux