Linux ARM MSM

• Thread Index

• Re: [PATCH V1 0/8] Add minimal boot support for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V1 7/8] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH V1 3/8] dt-bindings: pinctrl: qcom: Document IPQ9574 pinctrl driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V1 3/8] dt-bindings: pinctrl: qcom: Document IPQ9574 pinctrl driver
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH v3 00/10] Let iommufd charge IOPTE allocations to the memory cgroup
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH 08/10] dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 07/10] dt-bindings: firmware: document IPQ5332 SCM
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 09/10] arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 10/10] arm64: defconfig: Enable IPQ5332 SoC base configs
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 06/10] dt-bindings: qcom: add ipq5332 boards
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 04/10] dt-bindings: clock: Add Qualcomm IPQ5332 GCC
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 02/10] pinctrl: qcom: Introduce IPQ5332 TLMM driver
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 03/10] clk: qcom: Add STROMER PLUS PLL type for IPQ5332
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 00/10] Add minimal boot support for IPQ5332
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [syzbot] KMSAN: uninit-value in qrtr_tx_resume
  • From: syzbot <syzbot+4436c9630a45820fda76@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: Add DSC hardware blocks to register snapshot
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 10/10] drm/fbdev-generic: Rename struct fb_info 'fbi' to 'info'
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 09/10] drm/fbdev-generic: Inline clean-up helpers into drm_fbdev_fb_destroy()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 08/10] drm/fbdev-generic: Minimize client unregistering
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 07/10] drm/fbdev-generic: Minimize hotplug error handling
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 6/6] mm: export dump_mm()
  • From: Michal Hocko <mhocko@xxxxxxxx>
• Re: [PATCH v2 5/6] mm: introduce mod_vm_flags_nolock and use it in untrack_pfn
  • From: Michal Hocko <mhocko@xxxxxxxx>
• Re: [PATCH v2 06/10] drm/fb-helper: Initialize fb-helper's preferred BPP in prepare function
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 4/6] mm: replace vma->vm_flags indirect modification in ksm_madvise
  • From: Michal Hocko <mhocko@xxxxxxxx>
• Re: [PATCH v2 05/10] drm/fb-helper: Remove preferred_bpp parameter from fbdev internals
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 3/6] mm: replace vma->vm_flags direct modifications with modifier calls
  • From: Michal Hocko <mhocko@xxxxxxxx>
• Re: [PATCH v2 04/10] drm/fbdev-generic: Initialize fb-helper structure in generic setup
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v2 03/10] drm/fb-helper: Introduce drm_fb_helper_unprepare()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by default
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Add DSC hardware blocks to register snapshot
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: Add DSC hardware blocks to register snapshot
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] mm: introduce vma->vm_flags modifier functions
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/7] soc: qcom: rpmpd: Expand #defines into structs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/7] soc: qcom: rpmpd: Hook up VDDMX as parent of SM6375 VDDGX
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/10] drm/client: Add hotplug_failed flag
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH V1 1/8] dt-bindings: Add ipq9574 clock and reset definitions
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 4/7] soc: qcom: rpmpd: Remove SoC names from RPMPD names
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/6] mm: replace VM_LOCKED_CLEAR_MASK with VM_LOCKED_MASK
  • From: Michal Hocko <mhocko@xxxxxxxx>
• Re: [PATCH v1 13/14] drm/msm/disp/dpu1: add dsc supporting functions to dpu encoder
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/7] RPMPD cleanup + parent PD
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/6] mm: introduce vma->vm_flags modifier functions
  • From: Michal Hocko <mhocko@xxxxxxxx>
• [PATCH v2 6/6] mm: export dump_mm()
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• [PATCH v2 5/6] mm: introduce mod_vm_flags_nolock and use it in untrack_pfn
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• [PATCH v2 4/6] mm: replace vma->vm_flags indirect modification in ksm_madvise
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• [PATCH v2 3/6] mm: replace vma->vm_flags direct modifications with modifier calls
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• [PATCH v2 2/6] mm: replace VM_LOCKED_CLEAR_MASK with VM_LOCKED_MASK
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• [PATCH v2 1/6] mm: introduce vma->vm_flags modifier functions
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• [PATCH v2 0/6] introduce vm_flags modifier functions
  • From: Suren Baghdasaryan <surenb@xxxxxxxxxx>
• Re: [PATCH v2 01/10] drm/client: Test for connectors before sending hotplug event
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• [PATCH] soc: qcom: socinfo: Add support for new field in revision 17
  • From: Naman Jain <quic_namajain@xxxxxxxxxxx>
• Re: [PATCH V0 1/1] soc: qcom: dcc: Add QAD, Cti-trigger and Bootconfig support for DCC
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [PATCH v6 4/4] drm/msm: stop storing the array of CRTCs in struct msm_drm_private
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/6] rpmsg: glink: rpm: Wrap driver context
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH 6/6] rpmsg: glink: Cancel pending intent requests at removal
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH 5/6] rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sa8540p-ride: Document i2c busses
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• Re: [PATCH 4/6] rpmsg: glink: Move irq and mbox handling to transports
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: disable features unsupported by QCM2290
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/6] rpmsg: glink: Extract tx kick operation
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH 2/6] rpmsg: glink: smem: Wrap driver context
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH] rpmsg: glink: Release driver_override
  • From: Chris Lew <quic_clew@xxxxxxxxxxx>
• Re: [PATCH v9 10/27] gunyah: rsc_mgr: Add VM lifecycle RPC
  • From: Srivatsa Vaddagiri <quic_svaddagi@xxxxxxxxxxx>
• Re: [PATCH V2 1/3] soc: qcom: dcc: Add bootconfig support for DCC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [Intel-gfx] [PATCH v2 06/10] drm/fb-helper: Initialize fb-helper's preferred BPP in prepare function
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/7] soc: qcom: rpmpd: Expand #defines into structs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/7] soc: qcom: rpmpd: Move all RPMPD definitions up and sort them by name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/7] soc: qcom: rpmpd: Remove SoC names from RPMPD names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/7] soc: qcom: rpmpd: Add parent PD support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/7] soc: qcom: rpmpd: Hook up VDDMX as parent of SM6375 VDDGX
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/7] soc: qcom: rpmpd: Remove useless comments
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 7/7] soc: qcom: rpmpd: Make bindings assignments consistent
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 0/7] RPMPD cleanup + parent PD
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v6 4/4] drm/msm: stop storing the array of CRTCs in struct msm_drm_private
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [RESEND PATCH] of: property: do not create clocks device link for clock controllers
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH v3 2/9] interconnect: qcom: rpm: Always set QoS params on QNoC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7280: Add cpu and llcc BWMON (=> interconnect issue)
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• Re: [PATCH v1 00/14] add display port DSC feature
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: disable features unsupported by QCM2290
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1 10/14] drm/msm/disp/dpu: add supports of DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [RESEND PATCH v3 0/3] thermal: qcom-spmi-temp-alarm: add support for new TEMP_ALARM subtypes
  • From: David Collins <quic_collinsd@xxxxxxxxxxx>
• [RESEND PATCH v3 1/3] thermal: qcom-spmi-temp-alarm: enable stage 2 shutdown when required
  • From: David Collins <quic_collinsd@xxxxxxxxxxx>
• [RESEND PATCH v3 3/3] thermal: qcom-spmi-temp-alarm: add support for LITE PMIC peripherals
  • From: David Collins <quic_collinsd@xxxxxxxxxxx>
• [RESEND PATCH v3 2/3] thermal: qcom-spmi-temp-alarm: add support for GEN2 rev 2 PMIC peripherals
  • From: David Collins <quic_collinsd@xxxxxxxxxxx>
• Re: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] drm/msm/dpu: add missing ubwc_swizzle setting to catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/msm/dpu: correct the UBWC version on sm6115
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/3] drm/msm/dpu: handle UBWC 1.0 in dpu_hw_sspp_setup_format
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH 1/2] bus: mhi: host: Remove duplicate ee check for syserr
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH 0/2] MHI host syserr fixes
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH 2/2] bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sa8540p-ride: Document i2c busses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 01/10] iommu: Add a gfp parameter to iommu_map()
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH] drm/msm/dsi: properly handle the case of empty OPP table in dsi_mgr_bridge_mode_valid
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] drm/msm/dsi: properly handle the case of empty OPP table in dsi_mgr_bridge_mode_valid
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• camss: Missing cleanup on probe error
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sa8540p-ride: Document i2c busses
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: sa8295p-adp: Add max20411 on i2c12
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 2/3] regulator: Introduce Maxim MAX20411 Step-Down converter
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 0/3] regulator: Add Maxim MAX20411 support
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v2 1/3] regulator: dt-bindings: Describe Maxim MAX20411
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: Add reserved memory region
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH V1 7/8] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by default
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH Resend v11 05/15] drm/msm/dp: disable self_refresh_aware after entering psr
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [RFC] memory pressure detection in VMs using PSI mechanism for dynamically inflating/deflating VM memory
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH v1 10/14] drm/msm/disp/dpu: add supports of DSC encoder v1.2 engine
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V1 7/8] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 06/14] drm/msm/dp: add display compression related struct
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• RE: [PATCH Resend v11 05/15] drm/msm/dp: disable self_refresh_aware after entering psr
  • From: Vinod Polimera <vpolimer@xxxxxxxxxxxxxxxx>
• Re: [PATCH V1 3/8] dt-bindings: pinctrl: qcom: Document IPQ9574 pinctrl driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 09/14] drm/msm/dsi: export struct msm_compression_info to dpu encoder
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [Intel-gfx] [PATCH 3/3] drm/connector: move ELD and video/audio latencies to display info
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 2/2] soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH V1 0/8] Add minimal boot support for IPQ9574
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH V1 8/8] arm64: defconfig: Enable IPQ9574 SoC base configs
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 7/8] arm64: dts: qcom: Add ipq9574 SoC and AL02 board support
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 6/8] dt-bindings: mmc: sdhci-msm: Document the IPQ9574 compatible
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 5/8] dt-bindings: arm: qcom: Add ipq9574 compatible
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 4/8] pinctrl: qcom: Add IPQ9574 pinctrl driver
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 3/8] dt-bindings: pinctrl: qcom: Document IPQ9574 pinctrl driver
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 0/8] Add minimal boot support for IPQ9574
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH V1 1/8] dt-bindings: Add ipq9574 clock and reset definitions
  • From: devi priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH AUTOSEL 6.1 09/35] arm64: dts: msm8994-angler: fix the memory map
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v2 10/10] drm/fbdev-generic: Rename struct fb_info 'fbi' to 'info'
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 07/10] drm/fbdev-generic: Minimize hotplug error handling
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 06/10] drm/fb-helper: Initialize fb-helper's preferred BPP in prepare function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 09/10] drm/fbdev-generic: Inline clean-up helpers into drm_fbdev_fb_destroy()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 08/10] drm/fbdev-generic: Minimize client unregistering
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 05/10] drm/fb-helper: Remove preferred_bpp parameter from fbdev internals
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 04/10] drm/fbdev-generic: Initialize fb-helper structure in generic setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 02/10] drm/client: Add hotplug_failed flag
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 03/10] drm/fb-helper: Introduce drm_fb_helper_unprepare()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 00/10] drm/fb-helper: Various cleanups
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH v2 01/10] drm/client: Test for connectors before sending hotplug event
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [Intel-gfx] [PATCH 3/3] drm/connector: move ELD and video/audio latencies to display info
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 12/12] arm64: dts: qcom: sm8550-mtp: Add PCIe PHYs and controllers nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 10/12] PCI: qcom: Add SM8550 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 08/12] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 06/12] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 04/12] phy: qcom-qmp: pcs-pcie: Add v6 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 05/12] phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 03/12] phy: qcom-qmp: pcs: Add v6.20 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 01/12] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 02/12] phy: qcom-qmp: pcs: Add v6 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5 00/12] sm8550: Add PCIe HC and PHY support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [Intel-gfx] [PATCH 3/3] drm/connector: move ELD and video/audio latencies to display info
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] firmware: qcom_scm: modify qcom_scm_set_download_mode()
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 0/3] Fix SMMU on SDX55 and SDX65
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFT PATCH v3 4/6] arm64: dts: qcom: sdm845: move codec to separate file
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 10/10] drm/fbdev-generic: Rename struct fb_info 'fbi' to 'info'
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 1/4] dt-bindings: display/msm: convert MDP5 schema to YAML format
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 0/3] Support for Solid Fill Planes
  • From: Simon Ser <contact@xxxxxxxxxxx>
• Re: [2/2] drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [2/2] drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [1/2] drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] drm/connector: move ELD and video/audio latencies to display info
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: dma: drop unneeded quotes
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp-combo: correct DP register offsets
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp-combo: correct DP register offsets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: sm8550: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/4] arm64: dts: qcom: sm8450: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/4] arm64: dts: qcom: sm8350: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/4] arm64: dts: qcom: use generic node name for Bluetooth
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] spi: dt-bindings: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: Fix DSIn PHY compatible
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] drm/msm/mdp5: Add check for kzalloc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm: Initialize mode_config earlier
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Shazad Hussain <quic_shazhuss@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: disable features unsupported by QCM2290
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: dma: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: dma: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: dma: cleanup examples - indentation, lowercase hex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/msm: Initialize mode_config earlier
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/3] drm/msm/mdss: convert UBWC setup to use match data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: dma: cleanup examples - indentation, lowercase hex
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 10/14] drm/msm/disp/dpu: add supports of DSC encoder v1.2 engine
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp-combo: correct DP register offsets
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
  • From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: dma: drop unneeded quotes
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [PATCH V1] bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support
  • From: Masami Hiramatsu (Google) <mhiramat@xxxxxxxxxx>
• [PATCH V1] bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 1/3] soc: qcom: dcc: Add bootconfig support for DCC
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 3/3] soc: qcom: dcc: Add QAD support for DCC
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 2/3] soc: qcom: dcc: Add CTI-trigger support for DCC
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• [PATCH V2 0/3] Add QAD, Cti-trigger and Bootconfig support for Data Capture and Compare(DCC)
  • From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
• Re: [Freedreno] [PATCH] drm/msm/dpu: sc7180: add missing WB2 clock control
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] drm/msm/mdss: convert UBWC setup to use match data
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm: use strscpy instead of strncpy
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: add missing ubwc_swizzle setting to catalog
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: drop stale comment from struct dpu_mdp_cfg doc
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: disable features unsupported by QCM2290
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: sc7180: add missing WB2 clock control
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: fix sm8450 CTL configuration
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1 04/14] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH Resend v11 00/15] Add PSR support for eDP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH Resend v11 15/15] drm/msm/disp/dpu: update dpu_enc crtc state on crtc enable/disable during self refresh
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH Resend v11 14/15] drm/msm/disp/dpu: clear active interface in the datapath cleanup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH Resend v11 13/15] drm/msm/disp/dpu: reset the datapath after timing engine disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH Resend v11 12/15] drm/msm/disp/dpu: wait for extra vsync till timing engine status is disabled
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH Resend v11 11/15] drm/msm/disp/dpu: get timing engine status from intf status register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH Resend v11 05/15] drm/msm/dp: disable self_refresh_aware after entering psr
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 00/14] add display port DSC feature
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 05/14] drm/msm/dp: upgrade tu calculation base on newest algorithm
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7280: Add cpu and llcc BWMON (=> interconnect issue)
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• Re: [PATCH v1 05/14] drm/msm/dp: upgrade tu calculation base on newest algorithm
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] ASoC: dt-bindings: google,sc7280-herobrine: Add platform property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 02/14] drm/msm/dp: add dsc factor into calculation of supported bpp
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFC] memory pressure detection in VMs using PSI mechanism for dynamically inflating/deflating VM memory
  • From: Sudarshan Rajagopalan <quic_sudaraja@xxxxxxxxxxx>
• Re: [PATCH] interconnect: Skip call into provider if initial bw is zero
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 06/14] drm/msm/dp: add display compression related struct
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 04/14] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 03/14] drm/msm/dp: add configure mainlink_levels base on lane number
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 08/14] drm/msm/dp: add dsc supporting functions to DP controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 01/14] drm/msm/dp: add dpcd read of both dsc and fec capability
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document SM6350 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 07/14] drm/msm/dp: add dsc helper functions
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v1 09/14] drm/msm/dsi: export struct msm_compression_info to dpu encoder
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 07/14] drm/msm/dp: add dsc helper functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 11/14] drm/msm/disp/dpu1: add supports of new flush mechanism
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC] memory pressure detection in VMs using PSI mechanism for dynamically inflating/deflating VM memory
  • From: "T.J. Alumbaugh" <talumbau@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: phy: qcom,hdmi-phy-other: mark it as clock provider
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: drop type for operating-points-v2
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] interconnect: Skip call into provider if initial bw is zero
  • From: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
• Re: [PATCH 10/10] drm/fbdev-generic: Rename struct fb_info 'fbi' to 'info'
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v3 08/10] iommu/intel: Use GFP_KERNEL in sleepable contexts
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 09/10] iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 03/10] iommu: Add a gfp parameter to iommu_map_sg()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 01/10] iommu: Add a gfp parameter to iommu_map()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 06/10] iommu/intel: Add a gfp parameter to alloc_pgtable_page()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 10/10] iommu/s390: Use GFP_KERNEL in sleepable contexts
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 00/10] Let iommufd charge IOPTE allocations to the memory cgroup
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 05/10] iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 02/10] iommu: Remove iommu_map_atomic()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 07/10] iommu/intel: Support the gfp argument to the map_pages op
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH v3 04/10] iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH 3/3] clk: qcom: rpmh: fix double RPMH_IPA_CLK assignment
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gcc-qcs404: fix duplicated num_parents
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/3] clk: qcom: cpu-8996: add missing cputype include
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] soc: qcom: restrict L2 accessors to ARM64 build tests
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: add compile test to MSM8996 CPU clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: dma: cleanup examples - indentation, lowercase hex
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 14/14] drm/msm/disp/dpu1: add sc7280 dsc block and sub block
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: dma: drop unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/3] clk: qcom: rpmh: fix double RPMH_IPA_CLK assignment
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] clk: qcom: gcc-qcs404: fix duplicated num_parents
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] clk: qcom: cpu-8996: add missing cputype include
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: drop unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 10/14] drm/msm/disp/dpu: add supports of DSC encoder v1.2 engine
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8450: Fix DSIn PHY compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 08/12] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 2/2] wifi: ath11k: use unique QRTR instance ID
  • From: Robert Marko <robert.marko@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 9/9] interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp-combo: correct DP register offsets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 9/9] interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore
  • From: Arnaud Vrac <rawoul@xxxxxxxxx>
• Re: [PATCH v1 00/14] add display port DSC feature
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v1 14/14] drm/msm/disp/dpu1: add sc7280 dsc block and sub block
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 13/14] drm/msm/disp/dpu1: add dsc supporting functions to dpu encoder
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 10/14] drm/msm/disp/dpu: add supports of DSC encoder v1.2 engine
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 07/14] drm/msm/dp: add dsc helper functions
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 09/14] drm/msm/dsi: export struct msm_compression_info to dpu encoder
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 12/14] drm/msm/disp/dpu1: revise timing engine programming to work for DSC
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 11/14] drm/msm/disp/dpu1: add supports of new flush mechanism
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 00/14] add display port DSC feature
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 03/14] drm/msm/dp: add configure mainlink_levels base on lane number
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 02/14] drm/msm/dp: add dsc factor into calculation of supported bpp
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 08/14] drm/msm/dp: add dsc supporting functions to DP controller
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 04/14] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 05/14] drm/msm/dp: upgrade tu calculation base on newest algorithm
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 06/14] drm/msm/dp: add display compression related struct
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1 01/14] drm/msm/dp: add dpcd read of both dsc and fec capability
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: arm: qcom: Add MSM8926 and Samsung Galaxy Tab 4 10.1 LTE
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: arm: qcom: Add MSM8926 and Samsung Galaxy Tab 4 10.1 LTE
  • From: Stefan Hansson <newbyte@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] serial: qcom_geni: Fix variable naming
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: PCI: qcom: Add SM8550 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/msm: Initialize mode_config earlier
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: arm: qcom: Add MSM8926 and Samsung Galaxy Tab 4 10.1 LTE
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: arm: qcom: Add MSM8926 and Samsung Galaxy Tab 4 10.1 LTE
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: ep: Change state_lock to mutex
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: qcom: apq8064: add second DSI host and PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] cpufreq: qcom-nvmem: use SoC ID-s from bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 2/3] ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 1/3] clk: qcom: smd: Add XO RPM clocks for MSM8226/MSM8974
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] ASoC: qdsp6: audioreach: Add ADSP ready check
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: PCI: qcom: Add SM8550 compatible
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/5] ARM: dts: qcom: pm8941: Add vibrator node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sm8550: drop incorrect cells from serial
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sm8450: drop incorrect cells from serial
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm8350: drop incorrect cells from serial
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: qcom: use generic node name for Bluetooth
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: qcom: sm6350: Use specific qmpphy compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] drm/msm: Initialize mode_config earlier
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm-smmu: Fix binding for SDX55 and SDX65
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] drm/msm/gpu: Add devfreq tuning debugfs
  • From: Rob Clark <robdclark@xxxxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v4 08/12] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Cédric Le Goater <clg@xxxxxxxx>
• Re: [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Dhruva Gole <d-gole@xxxxxx>
• Re: [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp-combo: correct DP register offsets
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 04/10] iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: clock: msm8939: Move msm8939 to a distinct yaml file
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: sm6350: Use specific qmpphy compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v4 0/3] Add USB/DP combo PHY config for SM6350
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 2/3] ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: arm-smmu: Fix binding for SDX55 and SDX65
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/3] Fix SMMU on SDX55 and SDX65
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sm8550: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm8450: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: sm8350: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: use generic node name for Bluetooth
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 07/13] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 05/13] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 03/13] net: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 2/2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 01/13] spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 2/2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 10/13] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: fix USB-DP PHY resets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sm8450: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sm8350: drop incorrect cells from serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: use generic node name for Bluetooth
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] drm/msm/gpu: Add devfreq tuning debugfs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update qcom CPR maintainer entry
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550: fix USB-DP PHY resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] clk: qcom: add compile test to MSM8996 CPU clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] phy: qcom-qmp-combo: correct DP register offsets
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v4 4/6] phy: qcom-qmp: qserdes-txrx-ufs: Add v6 register offsets
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 04/10] dt-bindings: phy: qcom,qmp-usb: Document SM8550 compatible
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 04/10] dt-bindings: phy: qcom,qmp-usb: Document SM8550 compatible
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v4 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Update qcom CPR maintainer entry
  • From: Niklas Cassel <niklas.cassel@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] clk: qcom: gcc-sa8775p: remove unused variables
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 04/10] dt-bindings: phy: qcom,qmp-usb: Document SM8550 compatible
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: nvmem: qfprom: add IPQ8074 compatible
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550: fix USB-DP PHY resets
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH v3 2/2] ASoC: dt-bindings: google,sc7280-herobrine: Add platform property
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [PATCH v3 1/2] ASoC: qcom: dt-bindings: lpass-va-macro: Update clock name
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [PATCH v3 0/2] Update lpass dt-bindings
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [PATCH 10/10] drm/fbdev-generic: Rename struct fb_info 'fbi' to 'info'
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 08/10] drm/fbdev-generic: Minimize client unregistering
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 09/10] drm/fbdev-generic: Inline clean-up helpers into drm_fbdev_fb_destroy()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 06/10] drm/fb-helper: Initialize fb-helper's preferred BPP in prepare function
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 07/10] drm/fbdev-generic: Minimize hotplug error handling
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 05/10] drm/fb-helper: Remove preferred_bpp parameter from fbdev internals
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 03/10] drm/fb-helper: Introduce drm_fb_helper_unprepare()
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 04/10] drm/fbdev-generic: Initialize fb-helper structure in generic setup
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 02/10] drm/client: Add hotplug_failed flag
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 01/10] drm/client: Test for connectors before sending hotplug event
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• [PATCH 00/10] drm/fb-helper: Various cleanups
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: [RFC] memory pressure detection in VMs using PSI mechanism for dynamically inflating/deflating VM memory
  • From: David Hildenbrand <david@xxxxxxxxxx>
• Re: [PATCH 1/8] iommu: Add a gfp parameter to iommu_map()
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH 2/2] clk: qcom: restrict drivers per ARM/ARM64
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] clk: qcom: add compile test to MSM8996 CPU clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 6/6] phy: qcom-qmp-ufs: Add SM8550 support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: phy: Add QMP UFS PHY comptible for SM8550
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: clock: Add SM7150 GCC clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: qcom: Add Global Clock Controller (GCC) driver for SM7150
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: clock: Add SM7150 GCC clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: clock: msm8939: Move msm8939 to a distinct yaml file
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [RFT PATCH v3 5/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrl
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFT PATCH v3 6/6] arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFT PATCH v3 4/6] arm64: dts: qcom: sdm845: move codec to separate file
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFT PATCH v3 3/6] arm64: dts: qcom: sdm850-lenovo-yoga: correct sound compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFT PATCH v3 2/6] arm64: dts: qcom: sdm845-xiaomi-beryllium: add generic sound compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFT PATCH v3 1/6] arm64: dts: qcom: sdm845-db845c: add generic sound compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 10/12] PCI: qcom: Add SM8550 PCIe support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: fix sm8450 CTL configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RESEND v5 0/6] Add resets for ADSP based audio clock controller driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] bus: mhi: ep: Change state_lock to mutex
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 0/6] MHI EP fixes and improvements
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [RFC PATCH] drm/msm/dpu: move UBWC/memory configuration to separate struct
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: disable features unsupported by QCM2290
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: add missing ubwc_swizzle setting to catalog
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RESEND v5 0/6] Add resets for ADSP based audio clock controller driver
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
  • From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
• [PATCH v4 6/6] arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 4/6] arm64: dts: qcom: Add msm8939-pm8916.dtsi include
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: qcom: Add Square apq8039-t2 board
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 3/6] arm64: dts: qcom: Add msm8939 SoC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 0/6] Add MSM8939 SoC support with two devices
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: clock: msm8939: Move msm8939 to a distinct yaml file
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [RFC PATCH v2 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: clock: Add SM7150 GCC clocks
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH v2 0/2] clk: qcom: Add GCC support for SM7150
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH v2 2/2] clk: qcom: Add Global Clock Controller (GCC) driver for SM7150
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• [PATCH 5/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 3/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/5] ARM: dts: qcom: pm8941: Add vibrator node
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 4/5] ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/5] Add support for some features on OnePlus One
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [RFC PATCH v2 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
  • From: Stefan Hansson <newbyte@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
  • From: Stefan Hansson <newbyte@xxxxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: arm: qcom: Add MSM8926 and Samsung Galaxy Tab 4 10.1 LTE
  • From: Stefan Hansson <newbyte@xxxxxxxxxxxxxxxx>
• [PATCH 0/3] Add samsung-matisselte and common matisse dtsi
  • From: Stefan Hansson <newbyte@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND v5 0/6] Add resets for ADSP based audio clock controller driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: nvmem: qfprom: add IPQ8074 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ASoC: dt-bindings: google,sc7280-herobrine: Add platform property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] ASoC: qcom: dt-bindings: lpass-va-macro: Update clock name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/3] clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v3 5/8] arm64: dts: qcom: Add msm8939 SoC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm6115: Add smp2p nodes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
• [PATCH v4 3/3] ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v4 1/3] clk: qcom: smd: Add XO RPM clocks for MSM8226/MSM8974
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v4 2/3] ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v4 0/3] Add XO clocks for MSM8226/MSM8974
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• Re: [PATCH v3 0/3] Add XO clocks for MSM8226/MSM8974
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• Re: [PATCH v6 09/10] arm64: dts: qcom: sc7180: Add support for HDCP in dp-controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 0/3] Add XO clocks for MSM8226/MSM8974
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 2/3] ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 1/3] clk: qcom: smd: Add XO RPM clocks for MSM8226/MSM8974
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [RESEND v5 6/6] clk: qcom: lpassaudiocc-sc7280: Skip lpass_aon_cc_pll config
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [RESEND v5 5/6] clk: qcom: lpassaudiocc-sc7280: Merge lpasscc into lpass_aon
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [RESEND v5 4/6] clk: qcom: lpasscorecc-sc7280: Skip lpasscorecc registration
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [RESEND v5 2/6] dt-bindings: clock: lpassaudiocc-sc7280: Add binding headers for lpasscc
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [RESEND v5 3/6] clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [RESEND v5 1/6] dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• [RESEND v5 0/6] Add resets for ADSP based audio clock controller driver
  • From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: drop stale comment from struct dpu_mdp_cfg doc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/4] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 1/4] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 4/4] cpufreq: qcom-nvmem: make qcom_cpufreq_get_msm_id() return the SoC ID
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 3/4] cpufreq: qcom-nvmem: use SoC ID-s from bindings
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 2/4] cpufreq: qcom-nvmem: reuse socinfo SMEM item struct
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 1/4] soc: qcom: socinfo: move SMEM item struct and defines to a header
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: nvmem: qfprom: add IPQ8074 compatible
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 09/10] arm64: dts: qcom: sc7180: Add support for HDCP in dp-controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: iommu: qcom: Add Qualcomm MSM8953 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2] ARM: dts: qcom: apq8064: add second DSI host and PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 5/6] clk: qcom: lpassaudiocc-sc7280: Merge lpasscc into lpass_aon
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 5/6] clk: qcom: lpassaudiocc-sc7280: Merge lpasscc into lpass_aon
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8295p-adp: Add max20411 on i2c4
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8295p-adp: Add max20411 on i2c4
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v17 0/9] Coresight: Add support for TPDM and TPDA
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: opp: opp-v2-kryo-cpu: add opp-microvolt nvmem based
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [RFT PATCH v2 4/6] arm64: dts: qcom: sdm845: move audio to separate file
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v9 26/27] virt: gunyah: Add irqfd interface
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v8 10/28] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 24/27] virt: gunyah: Add proxy-scheduled vCPUs
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 22/27] virt: gunyah: Add resource tickets
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 25/27] virt: gunyah: Add hypercalls for sending doorbell
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v3 4/8] clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9 27/27] virt: gunyah: Add ioeventfd
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 21/27] gunyah: vm_mgr: Add framework to add VM Functions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 20/27] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 17/27] firmware: qcom_scm: Use fixed width src vm bitmap
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 23/27] virt: gunyah: Add IO handlers
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 15/27] samples: Add sample userspace Gunyah VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 12/27] gunyah: rsc_mgr: Add RPC for sharing memory
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 18/27] firmware: qcom_scm: Register Gunyah platform ops
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 13/27] gunyah: vm_mgr: Add/remove user memory regions
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 16/27] gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 14/27] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 19/27] docs: gunyah: Document Gunyah VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 10/27] gunyah: rsc_mgr: Add VM lifecycle RPC
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 11/27] gunyah: vm_mgr: Introduce basic VM Manager
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 09/27] gunyah: rsc_mgr: Add resource manager RPC core
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 08/27] mailbox: Add Gunyah message queue mailbox
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 06/27] mailbox: Allow direct registration to a channel
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 05/27] virt: gunyah: Identify hypervisor version
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 04/27] virt: gunyah: Add hypercalls to identify Gunyah
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 07/27] virt: gunyah: msgq: Add hypercalls to send and receive messages
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 03/27] gunyah: Common types and error codes for Gunyah hypercalls
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 01/27] docs: gunyah: Introduce Gunyah Hypervisor
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 02/27] dt-bindings: Add binding for gunyah hypervisor
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH v9 00/27] Drivers for gunyah hypervisor
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v3 0/8] clk: qcom: msm8996: add support for the CBF clock
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 0/8] clk: qcom: msm8996: add support for the CBF clock
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• Re: [PATCH v3 0/8] clk: qcom: msm8996: add support for the CBF clock
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 4/8] clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RESEND PATCH] of: property: do not create clocks device link for clock controllers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: sc7280: Add cpu and llcc BWMON (=> interconnect issue)
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v6 1/2] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 0/2] Add base device tree files for QDU1000/QRU1000
  • From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
• [PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 04/10] iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• Re: [PATCH v6 01/10] drm/hdcp: Add drm_hdcp_atomic_check()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sa8295p-adp: Add max20411 on i2c4
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 04/10] iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v6 16/17] qcom: llcc/edac: Support polling mode for ECC handling
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 03/17] EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 1/8] iommu: Add a gfp parameter to iommu_map()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [GIT PULL] pinctrl: dt-bindings: qcom: bindings for v6.3
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: pinctrl: qcom,pmic-mpp: Rename "mpp" child node names to "-pins$"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: pinctrl: qcom,pmic-mpp: Rename "mpp" child node names to "-pins$"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: qcom: sm8250: Add GPU speedbin support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>