[PATCH v2 0/6] Sony SDM845 panel and remoteproc enablement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



v1 -> v2:
- Drop akatsuki touch panel as Marijn figures out some sleep-related
  things
- No more dependencies, the panel driver has been merged into drm-misc
  next
- "*-pin" { -> "*-pins {"
- treset-gpios -> touch-reset-gpios
- Drop "Don't use 0x in unit address" (solved)
- Drop IPA & modem, this keeps crashing for some reason..

2/7 is a total OF abuse and very RFC-ish..

v1: https://lore.kernel.org/lkml/20220930191049.123256-2-konrad.dybcio@xxxxxxxxxxxxxx/

This series enables display and touch panel on XZ2/XZ2c devices
equipped with a JDI panel with a TD4353 driver IC and just
touch panel for all XZ3 phones. It also enables the remote
processors, GPU&GMU and GPI DMA on all Tama devices.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Konrad Dybcio (6):
      arm64: dts: qcom: sdm845-tama: Add display nodes
      [RFC] arm64: dts: qcom: sdm845-tama: Add Synaptics Touchscreen
      arm64: dts: qcom: sdm845-tama: Add regulator-system-load to l14a/l28a
      arm64: dts: qcom: sdm845-tama: Enable remoteprocs
      arm64: dts: qcom: sdm845-tama: Enable GPU
      arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1

 .../dts/qcom/sdm845-sony-xperia-tama-akari.dts     |   4 +
 .../dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts  |  47 ++++-
 .../dts/qcom/sdm845-sony-xperia-tama-apollo.dts    |   6 +
 .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi     | 203 ++++++++++++++++++++-
 4 files changed, 257 insertions(+), 3 deletions(-)
---
base-commit: 24469a0e5052ba01a35a15f104717a82b7a4798b
change-id: 20230313-topic-tama_disp-f38a116f52df

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux