Re: [PATCH v3 19/19] PCI: qcom: Expose link transition counts via debugfs for v2.4.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/14/2023 4:06 PM, Sricharan Ramabadhran wrote:


On 3/10/2023 9:38 AM, Manivannan Sadhasivam wrote:
Qualcomm PCIe controllers of version v2.4.0 have debug registers in the
PARF region that count PCIe link transitions. Expose them over debugfs to
userspace to help debug the low power issues.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
  drivers/pci/controller/dwc/pcie-qcom.c | 33 ++++++++++++++++++++++++++
  1 file changed, 33 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index f99b7e7f3f73..0b41f007fa90 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -37,6 +37,7 @@
  /* PARF registers */
  #define PARF_SYS_CTRL                0x00
  #define PARF_PM_CTRL                0x20
+#define PARF_PM_STTS                0x24
  #define PARF_PCS_DEEMPH                0x34
  #define PARF_PCS_SWING                0x38
  #define PARF_PHY_CTRL                0x40
@@ -84,6 +85,12 @@
  /* PARF_PM_CTRL register fields */
  #define REQ_NOT_ENTR_L1                BIT(5)
+/* PARF_PM_STTS register fields */
+#define PM_LINKST_IN_L1SUB            BIT(8)
+#define PM_LINKST_IN_L0S            BIT(7)
+#define PM_LINKST_IN_L2                BIT(5)
+#define PM_LINKST_IN_L1                BIT(4)
+
  /* PARF_PCS_DEEMPH register fields */
  #define PCS_DEEMPH_TX_DEEMPH_GEN1(x)        FIELD_PREP(GENMASK(21, 16), x)   #define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)    FIELD_PREP(GENMASK(13, 8), x) @@ -737,6 +744,31 @@ static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
      return 0;
  }
+static int qcom_pcie_debugfs_func_2_4_0(struct seq_file *s, void *data)
+{
+    struct qcom_pcie *pcie = (struct qcom_pcie *) dev_get_drvdata(s->private);
+
+    seq_printf(s, "L0s transition count: %u\n",
+           readl_relaxed(pcie->parf + PM_LINKST_IN_L0S));
+
+    seq_printf(s, "L1 transition count: %u\n",
+           readl_relaxed(pcie->parf + PM_LINKST_IN_L1));
+
+    seq_printf(s, "L1.1 transition count: %u\n",
+           readl_relaxed(pcie->parf + PM_LINKST_IN_L1SUB));
+
+    seq_printf(s, "L2 transition count: %u\n",
+           readl_relaxed(pcie->parf + PM_LINKST_IN_L2));
+

  Using bitmask as register offset ? instead use PM_STTS and bitmask it ?

 Also, since its 1 bit, all are status and not count.
 Not sure, if you want it to limit this debug based on 'mhi' property
 being populated ?

Regards,
 Sricharan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux