[PATCH v8 08/14] arm64: dts: qcom: sm8250: Fix the base addresses of LLCC banks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

Reported-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 2f0e460acccd..a13cf98b1ac3 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3559,8 +3559,11 @@ usb_1_dwc3: usb@a600000 {
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm8250-llcc";
-			reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
 		};
 
 		usb_2: usb@a8f8800 {
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux