The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 1c97e28da6ad..3fefd8cbba6d 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2204,8 +2204,11 @@ gem_noc: interconnect@9100000 {
system-cache-controller@9200000 {
compatible = "qcom,sm8350-llcc";
- reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
- reg-names = "llcc_base", "llcc_broadcast_base";
+ reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+ <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+ <0 0x09600000 0 0x58000>;
+ reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+ "llcc3_base", "llcc_broadcast_base";
};
compute_noc: interconnect@a0c0000 {
--
2.25.1
