From: Andrew Lunn <andrew@xxxxxxx>
Add a brightness function, so the LEDs can be controlled from
software using the standard Linux LED infrastructure.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
drivers/net/phy/marvell.c | 45 ++++++++++++++++++++++++++++++++++-----
1 file changed, 40 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 0d706ee266af..e44a4a26346a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -144,11 +144,13 @@
/* WOL Event Interrupt Enable */
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
-/* LED Timer Control Register */
-#define MII_88E1318S_PHY_LED_TCR 0x12
-#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
-#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
-#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
+#define MII_88E1318S_PHY_LED_FUNC 0x10
+#define MII_88E1318S_PHY_LED_FUNC_OFF (0x8)
+#define MII_88E1318S_PHY_LED_FUNC_ON (0x9)
+#define MII_88E1318S_PHY_LED_TCR 0x12
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
/* Magic Packet MAC address registers */
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
@@ -2832,6 +2834,34 @@ static int marvell_hwmon_probe(struct phy_device *phydev)
}
#endif
+static int m88e1318_led_brightness_set(struct phy_device *phydev,
+ u32 index, enum led_brightness value)
+{
+ u16 reg;
+
+ reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE,
+ MII_88E1318S_PHY_LED_FUNC);
+ if (reg < 0)
+ return reg;
+
+ switch (index) {
+ case 0:
+ case 1:
+ case 2:
+ reg &= ~(0xf << (4 * index));
+ if (value == LED_OFF)
+ reg |= MII_88E1318S_PHY_LED_FUNC_OFF << (4 * index);
+ else
+ reg |= MII_88E1318S_PHY_LED_FUNC_ON << (4 * index);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return phy_write_paged(phydev, MII_MARVELL_LED_PAGE,
+ MII_88E1318S_PHY_LED_FUNC, reg);
+}
+
static int marvell_probe(struct phy_device *phydev)
{
struct marvell_priv *priv;
@@ -3081,6 +3111,7 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ .led_brightness_set = m88e1318_led_brightness_set,
},
{
.phy_id = MARVELL_PHY_ID_88E1145,
@@ -3187,6 +3218,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ .led_brightness_set = m88e1318_led_brightness_set,
},
{
.phy_id = MARVELL_PHY_ID_88E1540,
@@ -3213,6 +3245,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ .led_brightness_set = m88e1318_led_brightness_set,
},
{
.phy_id = MARVELL_PHY_ID_88E1545,
@@ -3239,6 +3272,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ .led_brightness_set = m88e1318_led_brightness_set,
},
{
.phy_id = MARVELL_PHY_ID_88E3016,
@@ -3380,6 +3414,7 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
+ .led_brightness_set = m88e1318_led_brightness_set,
},
};
--
2.39.2
