Linux USB Users
[Prev Page][Next Page]
- [PATCH] usb: gadget: f_uac1: fixing inconsistent indenting
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- Re: PCIe device (thunderbolt tunneled) runtime suspended while driver wants to attach.
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v3 0/2] Stop calling request_irq(), etc. with invalid IRQs in the USB drivers`
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: misc: chaoskey: remove useless else
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- PCIe device (thunderbolt tunneled) runtime suspended while driver wants to attach.
- From: Rajat Jain <rajatja@xxxxxxxxxx>
- [PATCH v2] usb: gadget: f_hid: optional SETUP/SET_REPORT mode
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- Re: [PATCH v3 1/2] usb: host: ohci-tmio: add IRQ check
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: optional SETUP/SET_REPORT mode
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 29/29] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH] net: hso: drop unused function argument
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v2] net: asix: fix uninit value in asix_mdio_read
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2] net: asix: fix uninit value in asix_mdio_read
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- [PATCH v2] net: asix: fix uninit value in asix_mdio_read
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH] net: asix: fix uninit value in asix_mdio_read
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH] net: asix: fix uninit value in asix_mdio_read
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/2] arm: dts: mt7623: add musb device nodes
- From: Rob Herring <robh@xxxxxxxxxx>
- [usb:usb-testing 31/85] drivers/usb/gadget/function/f_uac1.c:1087 f_audio_validate_opts() warn: inconsistent indenting
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: optional SETUP/SET_REPORT mode
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- [PATCH v3 2/2] usb: phy: tahvo: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 1/2] usb: host: ohci-tmio: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 0/2] Stop calling request_irq(), etc. with invalid IRQs in the USB drivers`
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH] usb: gadget: f_hid: optional SETUP/SET_REPORT mode
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- [PATCH v16 7/7] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 6/7] usb: host: xhci-plat: Create platform device for onboard hubs in probe()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 5/7] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 4/7] arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 3/7] ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 2/7] of/platform: Add stubs for of_platform_device_create/destroy()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 1/7] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v16 0/7] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v3 2/2] usbip: eliminate duplicate code in vhci_device_unlink_cleanup
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- [PATCH v3 1/2] usbip: give back URBs for unsent unlink requests during cleanup
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- [PATCH v3 0/2] Fix syzkaller bug: hung task in hub_port_init
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- Re: [PATCH] usb: misc: chaoskey: remove useless else
- From: Keith Packard <keithp@xxxxxxxxxx>
- Re: [PATCH v2 5/6] dt-bindings: usb: qcom,dwc3: add binding for IPQ6018
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 3/6] dt-bindings: usb: dwc3: add reference clock period
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: misc: chaoskey: remove useless else
- From: Salah Triki <salah.triki@xxxxxxxxx>
- Re: USB-Audio: Device or resource busy (strace log)
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- [PATCH] net: asix: fix uninit value in asix_mdio_read
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: optional SETUP/SET_REPORT mode
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [RFT PATCH] xhci: fix failure to give back some cached cancelled URBs.
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 04/12] usb: phy: tegra: Support OTG mode programming
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH] usb: gadget: f_hid: optional SETUP/SET_REPORT mode
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- Re: [PATCH v2 8/9] usb: phy: tahvo: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH] usb: xhci-ring: set all cancelled_td's cancel_status to TD_CLEARING_CACHE
- Re: [PATCH] usb: xhci-ring: set all cancelled_td's cancel_status to TD_CLEARING_CACHE
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci-ring: set all cancelled_td's cancel_status to TD_CLEARING_CACHE
- Re: [PATCH] usb: xhci-ring: set all cancelled_td's cancel_status to TD_CLEARING_CACHE
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- Re: [PATCH] usb: chipidea: fix RT issue for udc
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: chipidea: add loop timeout for hw_ep_set_halt()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 8/9] usb: phy: tahvo: add IRQ check
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/9] Stop calling devm_request_irq() with invalid IRQs in the USB drivers
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/9] Stop calling devm_request_irq() with invalid IRQs in the USB drivers
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usbip: give back URBs for unsent unlink requests during cleanup
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH v3 6/7] usb: gadget: bdc: remove unnecessary AND operation when get ep maxp
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 7/7] usb: gadget: remove unnecessary AND operation when get ep maxp
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 5/7] usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 3/7] usb: mtu3: fix the wrong HS mult value
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 4/7] usb: cdnsp: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 2/7] usb: mtu3: use @mult for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 1/7] usb: mtu3: restore HS function when set SS/SSP
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 04/11] usb: xhci-mtk: fix use-after-free of mtk->hcd
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [PATCH] usb: typec: tcpm: always rediscover when swapping DR
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH] usb: xhci-ring: set all cancelled_td's cancel_status to TD_CLEARING_CACHE
- From: Tao Wang <wat@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci-ring: USB SSD may fail to unmount if disconnect during data transferring.
- Re: [PATCH] usb: xhci-ring: USB SSD may fail to unmount if disconnect during data transferring.
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 6/7] usb: gadget: bdc: remove unnecessary AND operation when get ep maxp
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [PATCH v2 2/7] usb: mtu3: use @mult for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 5/7] usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 6/7] usb: gadget: bdc: remove unnecessary AND operation when get ep maxp
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 7/7] usb: gadget: remove unnecessary AND operation when get ep maxp
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 3/7] usb: mtu3: fix the wrong HS mult value
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 4/7] usb: cdnsp: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 1/7] usb: mtu3: restore HS function when set SS/SSP
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 2/7] usb: mtu3: use @mult for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 3/7] usb: mtu3: fix the wrong HS mult value
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 1/7] usb: mtu3: restore HS function when set SS/SSP
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH] usb: xhci-ring: USB SSD may fail to unmount if disconnect during data transferring.
- From: Tao Wang <wat@xxxxxxxxxxxxxx>
- Re: [PATCH 4/6] usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdnsp: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH 2/6] usb: mtu3: fix the wrong HS mult value
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re:Re: Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: "Slark Xiao" <slark_xiao@xxxxxxx>
- Re: LDD 3rd ed. - It was: Re: read() via USB bus
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: LDD 3rd ed. - It was: Re: read() via USB bus
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: LDD 3rd ed. - It was: Re: read() via USB bus
- From: "Valdis Klētnieks" <valdis.kletnieks@xxxxxx>
- Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- LDD 3rd ed. - It was: Re: read() via USB bus
- From: "Fabio M. De Francesco" <fmdefrancesco@xxxxxxxxx>
- Re: [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- Re: Regarding usb dwc3 core shutdown callback
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH] usb: dwc3: Decouple USB 2.0 L1 & L2 events
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- Re: UCSI failing due to probe() getting version 0
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] usb: gadget: remove unnecessary AND operation when get ep maxp
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 5/6] usb: gadget: bdc: remove unnecessary AND operation when get ep maxp
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 4/6] usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdnsp: fix the wrong mult value for HS isoc or intr
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 2/6] usb: mtu3: fix the wrong HS mult value
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v2 4/9] usb: gadget: udc: s3c2410: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH v2 9/9] usb: phy: twl6030: add IRQ checks
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH v2 8/9] usb: phy: tahvo: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH v2 7/9] usb: phy: fsl-usb: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH 5/6] usb: gadget: bdc: remove unnecessary AND operation when get ep maxp
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 4/6] usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 6/6] usb: gadget: remove unnecessary AND operation when get ep maxp
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 3/6] usb: cdnsp: fix the wrong mult value for HS isoc or intr
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 1/6] usb: mtu3: restore HS function when set SS/SSP
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 2/6] usb: mtu3: fix the wrong HS mult value
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [Bug 214021] The USB devices fail to be detected during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH 01/11] dt-bindings: usb: mtk-xhci: add support property 'tpl-support'
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re:Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: "Slark Xiao" <slark_xiao@xxxxxxx>
- Re:Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: "Slark Xiao" <slark_xiao@xxxxxxx>
- Re:Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: "Slark Xiao" <slark_xiao@xxxxxxx>
- Re: [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v2] usbip: give back URBs for unsent unlink requests during cleanup
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: connector: Add pd-disable property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse
- From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
- [PATCH] net: hso: drop unused function argument
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- [PATCH] usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [Bug 214021] The USB devices fail to be detected during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Regression with commit e532a096be0e ("net: usb: asix: ax88772: add phylib support")
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: UCSI failing due to probe() getting version 0
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v3 7/8] PCI: Replace pci_dev::driver usage by pci_dev::dev.driver
- From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
- Re: [PATCH v2] usbip: give back URBs for unsent unlink requests during cleanup
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- [PATCH v2] usb: musb: musb_dsps: Change function call order in dsps_probe()
- From: Nadezda Lutovinova <lutovinova@xxxxxxxxx>
- Re: UCSI failing due to probe() getting version 0
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: USB-Audio: Device or resource busy (strace log)
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: USB-Audio: Device or resource busy (strace log)
- From: Jaroslav Kysela <perex@xxxxxxxx>
- Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- USB-Audio: Device or resource busy (strace log)
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- USB-Audio: Device or resource busy
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: Bjørn Mork <bjorn@xxxxxxx>
- [usb:usb-linus] BUILD SUCCESS 664cc971fb259007e49cc8a3ac43b0787d89443f
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: read() via USB bus
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- [PATCH] [v2,1/1] This aims to support Foxconn SDX55
- From: Slark Xiao <slark_xiao@xxxxxxx>
- Re: [PATCH] usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH 09/11] usb: xhci-mtk: check boundary before check tt
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH 02/11] dt-bindings: usb: mtk-xhci: add optional property to disable usb2 ports
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH 03/11] dt-bindings: usb: mtk-xhci: add compatible for mt8195
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- [PATCH v3 0/8] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v3 7/8] PCI: Replace pci_dev::driver usage by pci_dev::dev.driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 01/11] dt-bindings: usb: mtk-xhci: add support property 'tpl-support'
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH] usb: xhci-mtk: relax TT periodic bandwidth allocation
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH] This change aims to support Foxconn SDX55. In some scenario, we need to use this port to capture memory dump.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] This change aims to support Foxconn SDX55. In some scenario, we need to use this port to capture memory dump.
- From: Slark Xiao <slark_xiao@xxxxxxx>
- [PATCH v3 2/2] usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v3 1/2] PM / wakeirq: support enabling wake-up irq after runtime_suspend called
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
- From: Michael <msbroadf@xxxxxxxxx>
- [RFC][PATCH] usb: dwc3: usb: dwc3: Force stop EP0 transfers during pullup disable
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: dwc3 spin_lock_irq flags
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: dwc3 spin_lock_irq flags
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v2] usbip: give back URBs for unsent unlink requests during cleanup
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- dwc3 spin_lock_irq flags
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v5 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: AMoonRabbit <razgriz.wilson6@xxxxxxxxx>
- [Bug 214021] The USB devices fail to be detected during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 214021] The USB devices fail to be detected during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 214021] New: The USB devices fail to be detected during boot
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: read() via USB bus
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH AUTOSEL 4.14 10/10] net: usb: lan78xx: don't modify phy_device state concurrently
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 11/11] net: usb: lan78xx: don't modify phy_device state concurrently
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.4 12/13] net: usb: lan78xx: don't modify phy_device state concurrently
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 18/20] net: usb: lan78xx: don't modify phy_device state concurrently
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 17/20] net: usb: pegasus: Check the return value of get_geristers() and friends;
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.13 19/24] net: usb: lan78xx: don't modify phy_device state concurrently
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.13 18/24] net: usb: pegasus: Check the return value of get_geristers() and friends;
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: read() via USB bus
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: [PATCH] usb: dwc2: gadget: implement udc_set_speed()
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- [PATCH] usb: dwc2: gadget: implement udc_set_speed()
- From: Argishti Aleksanyan <Argishti.Aleksanyan@xxxxxxxxxxxx>
- Re: [PATCH v2 6/9] usb: misc: brcmstb-usb-pinmap: add IRQ check
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/9] usb: gadget: udc: s3c2410: add IRQ check
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: chipidea: fix RT issue for udc
- From: Jeaho Hwang <jhhwang@xxxxxxxxxx>
- [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
- From: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
- [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
- From: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
- [PATCH v5 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
- From: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
- [PATCH v5 1/4] dt-bindings: pci: qcom: Document PCIe bindings for SC7280
- From: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
- [PATCH v5 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280
- From: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
- Re: [PATCH 08/11] usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests()
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH v2 5/9] usb: host: ohci-tmio: add IRQ check
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 9/9] usb: phy: twl6030: add IRQ checks
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 8/9] usb: phy: tahvo: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 7/9] usb: phy: fsl-usb: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 6/9] usb: misc: brcmstb-usb-pinmap: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 5/9] usb: host: ohci-tmio: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 4/9] usb: gadget: udc: s3c2410: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 3/6] usb: gadget: udc: at91: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 2/9] usb: dwc3: qcom: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 1/9] usb: dwc3: meson-g12a: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 0/9] Stop calling request_irq(), etc. with invalid IRQs in the USB drivers
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [usb:usb-testing] BUILD SUCCESS 73e19de7b79a2f26f0b370cc071728cede1ab3a0
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 4/4] PCIe: qcom: Add support to control pipe clk src
- From: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
- Re: read() via USB bus
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v2] USB: serial: option: add new VID/PID to support Fibocom FG150
- From: Zhengjun Zhang <zhangzhengjun@xxxxxxxxxxx>
- Re: [PATCH v3 0/4] Added some bug fixes for USB4
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH v3 0/4] Added some bug fixes for USB4
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH] usb: chipidea: add loop timeout for hw_ep_set_halt()
- From: Jeaho Hwang <jhhwang@xxxxxxxxxx>
- Re: [PATCH 4/9] usb: gadget: udc: s3c2410: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 1/9] usb: dwc3: meson-g12a: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 3/9] usb: gadget: udc: at91: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 2/9] usb: dwc3: qcom: add IRQ check
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: Authorization for Thunderbolt device is forgotten after each reboot
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [Bug 213967] Thinkpad T14 Chicony Webcam not recognized by kernel
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [Bug 213967] Thinkpad T14 Chicony Webcam not recognized by kernel
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [RFC PATCH] usb: xhci-mtk: handle bandwidth table rollover
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- Re: read() via USB bus
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [Bug 213967] Thinkpad T14 Chicony Webcam not recognized by kernel
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: read() via USB bus
- From: Oliver Neukum <oneukum@xxxxxxxx>
- read() via USB bus
- From: Muni Sekhar <munisekharrms@xxxxxxxxx>
- Re: [PATCH 09/11] usb: xhci-mtk: check boundary before check tt
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [Bug 213967] Thinkpad T14 Chicony Webcam not recognized by kernel
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [Bug 213967] Thinkpad T14 Chicony Webcam not recognized by kernel
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Jeaho Hwang <jhhwang@xxxxxxxxxx>
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH] usb: chipidea: get lock before calling usb_[disable|enable]_autosuspend()
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH 4/9] usb: gadget: udc: s3c2410: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 4/9] usb: gadget: udc: s3c2410: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH 1/9] usb: dwc3: meson-g12a: add IRQ check
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- [PATCH 3/9] usb: gadget: udc: at91: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 2/9] usb: dwc3: qcom: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 1/9] usb: dwc3: meson-g12a: add IRQ check
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 0/9] Stop calling devm_request_irq() with invalid IRQs in the USB drivers
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [GIT PULL] USB fixes for 5.14-rc5
- From: pr-tracker-bot@xxxxxxxxxx
- [Bug 213967] Thinkpad T14 Chicony Webcam not recognized by kernel
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] Add new VID/PID to support Fibocom FG150 5G module
- From: Lars Melin <larsm17@xxxxxxxxx>
- [PATCH v2 2/2] arm: dts: mt7623: add musb device nodes
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- [PATCH v2 0/2] Add MUSB for MT7623
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- [GIT PULL] USB fixes for 5.14-rc5
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] Add new VID/PID to support Fibocom FG150 5G module
- From: Zhengjun Zhang <zhangzhengjun@xxxxxxxxxxx>
- Re: Embedded USB Debug(EUD) driver
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: Embedded USB Debug(EUD) driver
- From: Subhashini Rao Beerisetty <subhashbeerisetty@xxxxxxxxx>
- Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- usbutils 014 release
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG]drivers: usb: serial: mos7840.c: dangling pointer in function mos7840_open
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG]drivers: usb: serial: mos7840.c: dangling pointer in function mos7840_open
- From: nil Yi <teroincn@xxxxxxxxx>
- Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v6 09/12] power: supply: smb347-charger: Implement USB VBUS regulator
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v6 08/12] power: supply: smb347-charger: Add missing pin control activation
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v6 07/12] power: supply: smb347-charger: Utilize generic regmap caching
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v6 06/12] power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v6 05/12] dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 03/11] dt-bindings: usb: mtk-xhci: add compatible for mt8195
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 02/11] dt-bindings: usb: mtk-xhci: add optional property to disable usb2 ports
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 01/11] dt-bindings: usb: mtk-xhci: add support property 'tpl-support'
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2] usbip: give back URBs for unsent unlink requests during cleanup
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- Re: [PATCH] usbip: give back URBs for unsent unlink requests during cleanup
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- [PATCH v3 4/4] thunderbolt: Fix port linking by checking all adapters
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v3 3/4] thunderbolt: Skip port init for control adapter(0)
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v3 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v3 1/4] thunderbolt: Add quirk to support vendor specific implementation
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v3 0/4] Added some bug fixes for USB4
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- Re: [PATCH] usbip: give back URBs for unsent unlink requests during cleanup
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usbip: give back URBs for unsent unlink requests during cleanup
- From: Anirudh Rayabharam <mail@xxxxxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS 548011957d1d72e0b662300c8b32b81d593b796e
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] ARM: dts: bcm283x: increase dwc2's RX FIFO size
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS 43ad944cd73f2360ec8ff31d29ea44830b3119af
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] ARM: dts: bcm283x: increase dwc2's RX FIFO size
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: bcm283x: increase dwc2's RX FIFO size
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH v2 2/6] phy: qcom-qmp: add USB3 PHY support for IPQ6018
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: phy: qcom,qmp: Add IPQ6018 USB3 PHY
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: bcm283x: increase dwc2's RX FIFO size
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- Re: [PATCH] phy: phy-twl4030-usb: Disable PHY for suspend
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: usb: gadget: u_serial: check Null pointer in EP callback
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- usb: gadget: u_serial: check Null pointer in EP callback
- From: Daehwan Jung <dh10.jung@xxxxxxxxxxx>
- Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH] USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
- From: David Bauer <mail@xxxxxxxxxxxxxxx>
- Re: USB xhci crash under load on 5.14-rc3
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH] USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Andrew Donnellan <ajd@xxxxxxxxxxxxx>
- Re: USB xhci crash under load on 5.14-rc3
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH net v2] net: pegasus: fix uninit-value in get_interrupt_interval
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- UCSI failing due to probe() getting version 0
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 1/2] usb: dwc2: rename DWC2_POWER_DOWN_PARAM_NONE state
- From: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCH] usb: chipidea: get lock before calling usb_[disable|enable]_autosuspend()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: USB xhci crash under load on 5.14-rc3
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: dwc2: rename DWC2_POWER_DOWN_PARAM_NONE state
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: dwc2: rename DWC2_POWER_DOWN_PARAM_NONE state
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: dwc2: rename DWC2_POWER_DOWN_PARAM_NONE state
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] USB-serial fixes for 5.14-rc5
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [GIT PULL] USB-serial fixes for 5.14-rc5
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH] usb: xhci-mtk: relax TT periodic bandwidth allocation
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [PATCH] usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [PATCH v2] xhci: fix unmatched num_trbs_free
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- [PATCH] docs: usb: fix malformed table
- From: Hu Haowen <src.res@xxxxxxxx>
- dwc2: remote wakeup implementation
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- Re: [PATCH 0/2] Add MUSB for MT7623
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- Re: Aw: Re: [PATCH 0/2] Add MUSB for MT7623
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- [PATCH] USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
- From: David Bauer <mail@xxxxxxxxxxxxxxx>
- Re: [REGRESSION?] Simultaneous writes to a reader-less, non-full pipe can hang
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION?] Simultaneous writes to a reader-less, non-full pipe can hang
- From: "Alex Xu (Hello71)" <alex_y_xu@xxxxxxxx>
- Re: [PATCH] usb: dwc2: Skip clock gating on Samsung SoCs
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [REGRESSION?] Simultaneous writes to a reader-less, non-full pipe can hang
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: Authorization for Thunderbolt device is forgotten after each reboot
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [REGRESSION?] Simultaneous writes to a reader-less, non-full pipe can hang
- From: "Alex Xu (Hello71)" <alex_y_xu@xxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH 0/2] Add MUSB for MT7623
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH net v2] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH v2 2/6] phy: qcom-qmp: add USB3 PHY support for IPQ6018
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 5/6] dt-bindings: usb: qcom,dwc3: add binding for IPQ6018
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 4/6] usb: dwc3: reference clock period configuration
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 6/6] arm64: qcom: ipq6018: add usb3 DT description
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 3/6] dt-bindings: usb: dwc3: add reference clock period
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 1/6] dt-bindings: phy: qcom,qmp: Add IPQ6018 USB3 PHY
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 08/11] usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- Re: [PATCH][next] usb: gadget: f_uac2: remove redundant assignments to pointer i_feature
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH][next] usb: gadget: f_uac2: remove redundant assignments to pointer i_feature
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- [PATCH 2/2] usb: dwc2: add true DWC2_POWER_DOWN_PARAM_NONE state
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH 1/2] usb: dwc2: rename DWC2_POWER_DOWN_PARAM_NONE state
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Aw: Re: [PATCH 0/2] Add MUSB for MT7623
- From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc2: Skip clock gating on Samsung SoCs
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH] USB: serial: pl2303: Add new PID to support PL256X (TYPE_MP)
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH v2] usb: dwc3: gadget: Avoid runtime resume if disabling pullup
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH] USB: serial: pl2303: fix GT type detection
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: Commit 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") broke pl2303 driver for my adapter
- From: Johan Hovold <johan@xxxxxxxxxx>
- [Bug 213967] New: Thinkpad T14 Chicony Webcam not recognized by kernel
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH 1/1] usb: serial: option: add Telit FD980 composition 0x1056
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v6 2/2] usb: typec: tcpm: Support non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: connector: Add pd-disable property
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v6 0/2] TCPM non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH] net: usb: lan78xx: don't modify phy_device state concurrently
- From: "Ivan T. Ivanov" <iivanov@xxxxxxx>
- Aw: Re: [PATCH 0/2] Add MUSB for MT7623
- From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
- USB xhci crash under load on 5.14-rc3
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Commit 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") broke pl2303 driver for my adapter
- From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
- [PATCH v2] usb: dwc3: gadget: Avoid runtime resume if disabling pullup
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Avoid runtime resume if disabling pullup
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [PATCH 08/11] usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Jeaho Hwang <jhhwang@xxxxxxxxxx>
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Jeaho Hwang <jhhwang@xxxxxxxxxx>
- Re: [PATCH] usb: chipidea: get lock before calling usb_[disable|enable]_autosuspend()
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: Aw: [PATCH 0/2] Add MUSB for MT7623
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- Re: ODROID-C1/-C2 USB Detection only triggered by some devices dwc2
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ODROID-C1/-C2 USB Detection only triggered by some devices dwc2
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc7280: Add interconnect properties for USB
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- [PATCH 1/1] usb: serial: option: add Telit FD980 composition 0x1056
- From: Daniele Palmas <dnlplm@xxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: connector: Add pd-supported property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: connector: Add pd-supported property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: connector: Add pd-supported property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
- From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc7280: Add interconnect properties for USB
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Aw: [PATCH 0/2] Add MUSB for MT7623
- From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- [PATCH 2/2] arm: dts: mt7623: add musb device nodes
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- [PATCH 0/2] Add MUSB for MT7623
- From: Sungbo Eo <mans0n@xxxxxxxxxx>
- Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Ido Schimmel <idosch@xxxxxxxxxx>
- Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 4/6] PCI: Provide wrapper to access a pci_dev's bound driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
- Re: [PATCH] usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 4/4] thunderbolt: Fix port linking by checking all adapters
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v2 3/4] thunderbolt: Skip port init for control adapter(0)
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v2 2/4] thunderbolt: Handle ring interrupt by reading intr status
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v2 1/4] thunderbolt: Intel controller uses BIT(2) for intr auto
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH v2 0/4] Added some bug fixes for USB4
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- Re: [PATCH 3/4] thunderbolt: Fix adapter init handling during switch add
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH 1/4] PCI: Add AMD USB4 host router device IDs
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH] usb: dwc2: Skip clock gating on Samsung SoCs
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v2 6/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v2 4/6] PCI: Provide wrapper to access a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] PCI: Add AMD USB4 host router device IDs
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc2: Skip clock gating on Samsung SoCs
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH] usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- Re: [PATCH 3/4] thunderbolt: Fix adapter init handling during switch add
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Avoid runtime resume if disabling pullup
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH 08/11] usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
- From: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: class: usblp: replace conditional statement with min()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: class: usblp: replace conditional statement with min()
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
- From: Michael <msbroadf@xxxxxxxxx>
- Re: [PATCH] usb: misc: chaoskey: get lock before calling usb_[disable|enable]_autosuspend()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: storage: realtek_cr: get lock before calling usb_enable_autosuspend()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: misc: adutux: use swap()
- From: Salah Triki <salah.triki@xxxxxxxxx>
- [PATCH] usb: class: usblp: replace conditional statement with min()
- From: Salah Triki <salah.triki@xxxxxxxxx>
- Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: storage: realtek_cr: get lock before calling usb_enable_autosuspend()
- From: Salah Triki <salah.triki@xxxxxxxxx>
- [PATCH] usb: misc: chaoskey: get lock before calling usb_[disable|enable]_autosuspend()
- From: Salah Triki <salah.triki@xxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- [PATCH] usb: chipidea: get lock before calling usb_[disable|enable]_autosuspend()
- From: Salah Triki <salah.triki@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Avoid runtime resume if disabling pullup
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- Re: [PATCH v5 5/6] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Petko Manolov <petkan@xxxxxxxxxxxxx>
- Re: [PATCH v4 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 3/4] thunderbolt: Fix adapter init handling during switch add
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH v3] thunderbolt: For dev authorization changes, include the actual event in udev change notification
- From: Rajat Jain <rajatxjain@xxxxxxxxx>
- Re: [PATCH 2/4] thunderbolt: Handle INTR when Disable ISR auto clear bit set
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH 1/4] PCI: Add AMD USB4 host router device IDs
- From: Sanjay R Mehta <sanmehta@xxxxxxx>
- Re: [PATCH 3/4] thunderbolt: Fix adapter init handling during switch add
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] thunderbolt: Handle INTR when Disable ISR auto clear bit set
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] PCI: Add AMD USB4 host router device IDs
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] Add support for AMD USB4 and bug fixes
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v3] thunderbolt: For dev authorization changes, include the actual event in udev change notification
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 4/5] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
- [PATCH 4/4] thunderbolt: Fix port linking by checking all adapters
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH 3/4] thunderbolt: Fix adapter init handling during switch add
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH 2/4] thunderbolt: Handle INTR when Disable ISR auto clear bit set
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH 1/4] PCI: Add AMD USB4 host router device IDs
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- [PATCH 0/4] Add support for AMD USB4 and bug fixes
- From: Sanjay R Mehta <Sanju.Mehta@xxxxxxx>
- RE: [PATCH] usb: dwc3: imx8mp: detect dwc3 core node via compatible string
- From: Jun Li <jun.li@xxxxxxx>
- Chipidea USB device goes infinite loop due to interrupt while hw_ep_prime
- From: Jeaho Hwang <jhhwang@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: remove useless cast
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: Fix inconsistent indent
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: imx8mp: detect dwc3 core node via compatible string
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- RE: [PATCH] usb: dwc3: imx8mp: detect dwc3 core node via compatible string
- From: Jun Li <jun.li@xxxxxxx>
- [PATCH] arm64: dts: qcom: sc7280: Add interconnect properties for USB
- From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
- [PATCH v2 6/6] USB: serial: kl5kusb105: use usb_control_msg_recv() and usb_control_msg_send()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- [PATCH v2 5/6] USB: serial: keyspan_pda: use usb_control_msg_recv()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- [PATCH v2 4/6] USB: serial: ftdi_sio: use usb_control_msg_recv()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- [PATCH v2 3/6] USB: serial: f81232: use usb_control_msg_recv() and usb_control_msg_send()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- [PATCH v2 2/6] USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- [PATCH v2 1/6] USB: serial: ch314: use usb_control_msg_recv() and usb_control_msg_send()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- [PATCH v2 0/6] USB: serial: use wrappers for usb_control_msg()
- From: Himadri Pandya <himadrispandya@xxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Petko Manolov <petkan@xxxxxxxxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- [PATCH] drivers/net/usb: Remove all strcpy() uses
- From: Len Baker <len.baker@xxxxxxx>
- Re: [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Petko Manolov <petkan@xxxxxxxxxxxxx>
- Re: [BUG]drivers: usb: serial: mos7840.c: dangling pointer in function mos7840_open
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [BUG]drivers: usb: serial: mos7840.c: dangling pointer in function mos7840_open
- From: nil Yi <teroincn@xxxxxxxxx>
- Re: Lacie Rugged USB3-FW does not work with UAS
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Lacie Rugged USB3-FW does not work with UAS
- From: Julian Sikorski <belegdol@xxxxxxxxx>
- Re: Lacie Rugged USB3-FW does not work with UAS
- From: Julian Sikorski <belegdol@xxxxxxxxx>
- [PATCH] usb: gadget: Fix inconsistent indent
- From: Wei Ming Chen <jj251510319013@xxxxxxxxx>
- [PATCH v6 08/12] power: supply: smb347-charger: Add missing pin control activation
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 06/12] power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 11/12] ARM: tegra: nexus7: Enable USB OTG mode
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 10/12] ARM: tegra: Add new properties to USB PHY device-tree nodes
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 12/12] arm64: tegra132: Add new properties to USB PHY device-tree node
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 09/12] power: supply: smb347-charger: Implement USB VBUS regulator
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 07/12] power: supply: smb347-charger: Utilize generic regmap caching
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 05/12] dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 04/12] usb: phy: tegra: Support OTG mode programming
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 03/12] soc/tegra: pmc: Expose USB regmap to all SoCs
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 02/12] dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG mode
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 01/12] dt-bindings: phy: tegra20-usb-phy: Convert to schema
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v6 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH] usb: gadget: remove useless cast
- From: Salah Triki <salah.triki@xxxxxxxxx>
- Re: [PATCH v1 4/5] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Embedded USB Debug(EUD) driver
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: dwc3: gadget: Avoid runtime resume if disabling pullup
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [PATCH v2] thunderbolt: For dev authorization changes, include the actual event in udev change notification
- From: Rajat Jain <rajatja@xxxxxxxxxx>
- [PATCH v3] thunderbolt: For dev authorization changes, include the actual event in udev change notification
- From: Rajat Jain <rajatja@xxxxxxxxxx>
- Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
- From: Michael <msbroadf@xxxxxxxxx>
- Re: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- [PATCH] net: pegasus: fix uninit-value in get_interrupt_interval
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH v1 4/5] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
- Re: [PATCH v5 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1 0/5] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v5 00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/6] USB: serial: cp210x: fixes and CP2105/CP2108 fw version
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] USB: serial: pl2303: fix HX type detection
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v5 2/2] usb: typec: tcpm: Support non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: connector: Add pd-unsupported property
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v5 0/2] TCPM non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- Re: Commit 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") broke pl2303 driver for my adapter
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] USB: serial: pl2303: fix HX type detection
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] USB: serial: pl2303: fix HX type detection
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: pl2303 : unknown device type
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.
- From: Zhou Yanjie <zhouyanjie@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: dwc2: Add bindings for new Ingenic SoCs.
- From: Zhou Yanjie <zhouyanjie@xxxxxxxxxxxxxx>
- [PATCH 08/11] usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 07/11] usb: xhci-mtk: fix issue of out-of-bounds array access
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 06/11] usb: xhci-mtk: support option to disable usb2 ports
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 10/11] usb: xhci-mtk: add a member of num_esit
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 09/11] usb: xhci-mtk: check boundary before check tt
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 11/11] usb: xhci-mtk: modify the SOF/ITP interval for mt8195
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 04/11] usb: xhci-mtk: fix use-after-free of mtk->hcd
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 05/11] usb: xhci-mtk: add support 'tpl-support'
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 02/11] dt-bindings: usb: mtk-xhci: add optional property to disable usb2 ports
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 03/11] dt-bindings: usb: mtk-xhci: add compatible for mt8195
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 01/11] dt-bindings: usb: mtk-xhci: add support property 'tpl-support'
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: usb-storage & xhci_hcd & swiotlb buffer problem filling systemd with error during operation with SSD on USB3
- From: Sébastien Rey-Coyrehourcq <sebastien.rey-coyrehourcq@xxxxxxxxxxxxx>
- Re: [PATCH v1 0/5] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: pl2303 : unknown device type
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] usb: typec: tcpm: Support non-PD mode
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: connector: Add pd-supported property
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v4 2/2] usb: typec: tcpm: Support non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: connector: Add pd-supported property
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v4 0/2] TCPM non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- Re: [PATCH v1 0/5] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: usb-storage & xhci_hcd & swiotlb buffer problem filling systemd with error during operation with SSD on USB3
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS 64cd4271ea8e6247f7ed14c443e41d0f5866aac0
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: dwc2: Add bindings for new Ingenic SoCs.
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v1 0/5] PCI: Drop duplicated tracking of a pci_dev's bound driver
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v1 4/5] PCI: Adapt all code locations to not use struct pci_dev::driver directly
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS a154c43b95e860a305d8c943fb3a16ece9a69715
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: Commit 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") broke pl2303 driver for my adapter
- From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
- usb-storage & xhci_hcd & swiotlb buffer problem filling systemd with error during operation with SSD on USB3
- From: Sébastien Rey-Coyrehourcq <sebastien.rey-coyrehourcq@xxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: pl2303 : unknown device type
- From: Chris <chris@xxxxxxxxxxxxxxx>
- Re: [PATCH 35/54] dt-bindings: usb: dwc3: Fix usb-phy check
- From: Maxime Ripard <maxime@xxxxxxxxxx>
- Re: [PATCH] USB: serial: ch341: fix character loss at high transfer rates
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: pl2303 : unknown device type
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: pl2303 : unknown device type
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: Commit 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") broke pl2303 driver for my adapter
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] drivers: usb: dwc3-qcom: Add sdm660 compatible
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
- Re: Lacie Rugged USB3-FW does not work with UAS
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: Lacie Rugged USB3-FW does not work with UAS
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] drivers: usb: dwc3-qcom: Add sdm660 compatible
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [GIT PULL] usb: fixes for v5.14-rc4
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [GIT PULL] usb: fixes for v5.14-rc4
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH] drivers: usb: dwc3-qcom: Add sdm660 compatible
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] drivers: usb: dwc3-qcom: Add sdm660 compatible
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS fa20bada3f934e3b3e4af4c77e5b518cd5a282e5
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH net-next v3 14/31] net: usb: use ndo_siocdevprivate
- From: Petko Manolov <petkan@xxxxxxxxxxxxx>
- Re: [PATCH] Revert "usb: renesas-xhci: Fix handling of unknown ROM state"
- From: Florian Klink <flokli@xxxxxxxxx>
- Re: [PATCH] Revert "usb: renesas-xhci: Fix handling of unknown ROM state"
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Revert "usb: renesas-xhci: Fix handling of unknown ROM state"
- From: Florian Klink <flokli@xxxxxxxxx>
- Re: [PATCH] USB HID: Fix spelling mistake "Uninterruptable" -> "Uninterruptible"
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH] usbhid: free raw_report buffers in usbhid_stop
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- [PATCH v3 2/2] usb: typec: tcpm: Support non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: connector: Add pd-supported property
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v3 0/2] TCPM non-pd mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: pxa25x_udc: Constify static struct pxa25x_ep_ops
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- [PATCH] usb: gadget: pxa25x_udc: Constify static struct pxa25x_ep_ops
- From: Rikard Falkeborn <rikard.falkeborn@xxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS cbbdb3fe0d974d655c87c3e6ba2990d5496b9f82
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- Re: [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: typec: tcpm: Support non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- Re: [PATCH 2/2] phy: mediatek: phy-mtk-tphy: support USB2UART switch
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 1/2] phy: introduce phy mode PHY_MODE_UART and phy_get_mode_ext()
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Commit 8a7bf7510d1f ("USB: serial: pl2303: amend and tighten type detection") broke pl2303 driver for my adapter
- From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
- Re: [PATCH v2 2/2] usb: typec: tcpm: Support non-PD mode
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: Lacie Rugged USB3-FW does not work with UAS
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2] usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback
- From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v3 00/31] ndo_ioctl rework
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v2] usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- [PATCH] usb: gadget: f_hid: idle uses the highest byte for duration
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- [PATCH v5 5/6] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH AUTOSEL 5.13 06/21] USB: core: Fix incorrect pipe calculation in do_proc_control()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH v2] usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
- From: Maxim Devaev <mdevaev@xxxxxxxxx>
- Re: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: connector: Add pd-supported property
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: AMoonRabbit <razgriz.wilson6@xxxxxxxxx>
- Re: [PATCH] Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/2] usb: typec: tcpm: Support non-PD mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: connector: Add pd-supported property
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- [PATCH v2 0/2] TCPM non-pd mode
- From: Kyle Tso <kyletso@xxxxxxxxxx>
- RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: "Schmid, Carsten" <Carsten_Schmid@xxxxxxxxxx>
- RE: [PATCH v4 09/10] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH -next v2] usb: gadget: remove leaked entry from udc driver list
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: usbtmc: Fix RCU stall warning
- From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH net-next v3 14/31] net: usb: use ndo_siocdevprivate
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH net-next v3 00/31] ndo_ioctl rework
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- Re: usb port enumeration changed? [resolved]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH AUTOSEL 5.13 06/21] USB: core: Fix incorrect pipe calculation in do_proc_control()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH AUTOSEL 5.4 4/9] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 3/6] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: pl2303 : unknown device type
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH AUTOSEL 4.4 2/3] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 2/3] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 2/5] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 05/17] USB: core: Fix incorrect pipe calculation in do_proc_control()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 06/17] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.13 08/21] r8152: Fix a deadlock by doubly PM resume
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.13 06/21] USB: core: Fix incorrect pipe calculation in do_proc_control()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.13 07/21] r8152: Fix potential PM refcount imbalance
- From: Sasha Levin <sashal@xxxxxxxxxx>
- RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: "Schmid, Carsten" <Carsten_Schmid@xxxxxxxxxx>
- pl2303 : unknown device type
- From: Chris <chris@xxxxxxxxxxxxxxx>
- RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: AMoonRabbit <razgriz.wilson6@xxxxxxxxx>
- [PATCH 2/2] phy: mediatek: phy-mtk-tphy: support USB2UART switch
- From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
- [PATCH 1/2] phy: introduce phy mode PHY_MODE_UART and phy_get_mode_ext()
- From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
- [PATCH] phy: phy-twl4030-usb: Disable PHY for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/3] usb: isp1760: rework cache initialization error handling
- From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
- [PATCH 1/3] usb: isp1760: remove debug message as error
- From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
- [PATCH 2/3] usb: isp1760: do not sleep in field register poll
- From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
- [PATCH 0/3] usb: isp1760: cleanups and sleep in atomic
- From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
- Re: [PATCH v2] USB: usbtmc: Fix RCU stall warning
- From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
- [bug report] usb: gadget: bdc: use readl_poll_timeout() to simplify code
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH -next v2] usb: gadget: remove leaked entry from udc driver list
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- RE: [PATCH v2] USB: usbtmc: Fix RCU stall warning
- From: Guido Kiener <Guido.Kiener@xxxxxxxxxxxxxxxxx>
- RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: "Schmid, Carsten" <Carsten_Schmid@xxxxxxxxxx>
- [PATCH -next] usb: gadget: remove leaked entry from udc driver list
- From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
- [PATCH -next v2] usb: gadget: remove leaked entry from udc driver list
- From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
- Re: usb port enumeration changed? [resolved]
- From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
- Re: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: usb port enumeration changed?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- usb port enumeration changed?
- From: Eyal Lebedinsky <eyal@xxxxxxxxxxxxxx>
- [PATCH v15 6/6] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v15 4/6] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v15 3/6] arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v15 5/6] usb: host: xhci-plat: Create platform device for onboard hubs in probe()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v15 2/6] of/platform: Add stubs for of_platform_device_create/destroy()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v15 1/6] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v15 0/6] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
- From: "Razgriz375 (Neil)" <razgriz.wilson6@xxxxxxxxx>
- Re: [PATCH v4 09/10] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings
- From: Rob Herring <robh@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]