On Sat, Nov 13, 2021 at 12:57:14PM +0800, Haimin Zhang wrote: > Due to (wIndex & 0xff) - 1 can get an integer greater than 0xf, this > can cause array index to be out of bounds since the size of array > port_status is 0xf. This change prevents a possible out-of-bounds > pointer computation by forcing the use of a valid port number. > > Reported-by: TCS Robot <tcs_robot@xxxxxxxxxxx> > Signed-off-by: Haimin Zhang <tcs.kernel@xxxxxxxxx> > --- > drivers/usb/host/ehci-brcm.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c > index d3626bfa966b..2e92918a14dd 100644 > --- a/drivers/usb/host/ehci-brcm.c > +++ b/drivers/usb/host/ehci-brcm.c > @@ -62,8 +62,12 @@ static int ehci_brcm_hub_control( > u32 __iomem *status_reg; > unsigned long flags; > int retval, irq_disabled = 0; > + u32 temp; > > - status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; > + temp = (wIndex & 0xff) - 1; > + if (temp >= HCS_N_PORTS_MAX) > + temp = 0; > + status_reg = &ehci->regs->port_status[temp]; > > /* > * RESUME is cleared when GetPortStatus() is called 20ms after start > -- > 2.30.1 (Apple Git-130) > Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what needs to be done here to properly describe this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot