Remove the standalone PMIC Type-C driver. We have implemented a full TCPM
driver which covers and extends the functionality in this driver.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/usb/typec/Kconfig | 13 --
drivers/usb/typec/Makefile | 1 -
drivers/usb/typec/qcom-pmic-typec.c | 262 ----------------------------
3 files changed, 276 deletions(-)
delete mode 100644 drivers/usb/typec/qcom-pmic-typec.c
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index ab480f38523aa..61fba7bd1671d 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -75,19 +75,6 @@ config TYPEC_STUSB160X
If you choose to build this driver as a dynamically linked module, the
module will be called stusb160x.ko.
-config TYPEC_QCOM_PMIC
- tristate "Qualcomm PMIC USB Type-C driver"
- depends on ARCH_QCOM || COMPILE_TEST
- depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
- help
- Driver for supporting role switch over the Qualcomm PMIC. This will
- handle the USB Type-C role and orientation detection reported by the
- QCOM PMIC if the PMIC has the capability to handle USB Type-C
- detection.
-
- It will also enable the VBUS output to connected devices when a
- DFP connection is made.
-
source "drivers/usb/typec/mux/Kconfig"
source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index a0adb8947a301..4dc7fc91159df 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,6 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
-obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
obj-$(CONFIG_TYPEC) += mux/
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
deleted file mode 100644
index a0454a80c4a21..0000000000000
--- a/drivers/usb/typec/qcom-pmic-typec.c
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mod_devicetable.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/usb/role.h>
-#include <linux/usb/typec_mux.h>
-
-#define TYPEC_MISC_STATUS 0xb
-#define CC_ATTACHED BIT(0)
-#define CC_ORIENTATION BIT(1)
-#define SNK_SRC_MODE BIT(6)
-#define TYPEC_MODE_CFG 0x44
-#define TYPEC_DISABLE_CMD BIT(0)
-#define EN_SNK_ONLY BIT(1)
-#define EN_SRC_ONLY BIT(2)
-#define TYPEC_VCONN_CONTROL 0x46
-#define VCONN_EN_SRC BIT(0)
-#define VCONN_EN_VAL BIT(1)
-#define TYPEC_EXIT_STATE_CFG 0x50
-#define SEL_SRC_UPPER_REF BIT(2)
-#define TYPEC_INTR_EN_CFG_1 0x5e
-#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(7, 0)
-
-struct qcom_pmic_typec {
- struct device *dev;
- struct regmap *regmap;
- u32 base;
-
- struct typec_port *port;
- struct usb_role_switch *role_sw;
-
- struct regulator *vbus_reg;
- bool vbus_enabled;
-};
-
-static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
- *qcom_usb, bool enable)
-{
- int ret;
-
- if (enable == qcom_usb->vbus_enabled)
- return;
-
- if (enable) {
- ret = regulator_enable(qcom_usb->vbus_reg);
- if (ret)
- return;
- } else {
- ret = regulator_disable(qcom_usb->vbus_reg);
- if (ret)
- return;
- }
- qcom_usb->vbus_enabled = enable;
-}
-
-static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
-{
- enum typec_orientation orientation;
- enum usb_role role;
- unsigned int stat;
- bool enable_vbus;
-
- regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
- &stat);
-
- if (stat & CC_ATTACHED) {
- orientation = (stat & CC_ORIENTATION) ?
- TYPEC_ORIENTATION_REVERSE :
- TYPEC_ORIENTATION_NORMAL;
- typec_set_orientation(qcom_usb->port, orientation);
-
- role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
- if (role == USB_ROLE_HOST)
- enable_vbus = true;
- else
- enable_vbus = false;
- } else {
- role = USB_ROLE_NONE;
- enable_vbus = false;
- }
-
- qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
- usb_role_switch_set_role(qcom_usb->role_sw, role);
-}
-
-static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
-{
- struct qcom_pmic_typec *qcom_usb = _qcom_usb;
-
- qcom_pmic_typec_check_connection(qcom_usb);
- return IRQ_HANDLED;
-}
-
-static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb,
- enum typec_port_type type)
-{
- u8 mode = 0;
-
- regmap_update_bits(qcom_usb->regmap,
- qcom_usb->base + TYPEC_INTR_EN_CFG_1,
- TYPEC_INTR_EN_CFG_1_MASK, 0);
-
- if (type == TYPEC_PORT_SRC)
- mode = EN_SRC_ONLY;
- else if (type == TYPEC_PORT_SNK)
- mode = EN_SNK_ONLY;
-
- regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
- EN_SNK_ONLY | EN_SRC_ONLY, mode);
-
- regmap_update_bits(qcom_usb->regmap,
- qcom_usb->base + TYPEC_VCONN_CONTROL,
- VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
- regmap_update_bits(qcom_usb->regmap,
- qcom_usb->base + TYPEC_EXIT_STATE_CFG,
- SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
-}
-
-static int qcom_pmic_typec_probe(struct platform_device *pdev)
-{
- struct qcom_pmic_typec *qcom_usb;
- struct device *dev = &pdev->dev;
- struct fwnode_handle *fwnode;
- struct typec_capability cap;
- const char *buf;
- int ret, irq, role;
- u32 reg;
-
- ret = device_property_read_u32(dev, "reg", ®);
- if (ret < 0) {
- dev_err(dev, "missing base address\n");
- return ret;
- }
-
- qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
- if (!qcom_usb)
- return -ENOMEM;
-
- qcom_usb->dev = dev;
- qcom_usb->base = reg;
-
- qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
- if (!qcom_usb->regmap) {
- dev_err(dev, "Failed to get regmap\n");
- return -EINVAL;
- }
-
- qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus");
- if (IS_ERR(qcom_usb->vbus_reg))
- return PTR_ERR(qcom_usb->vbus_reg);
-
- fwnode = device_get_named_child_node(dev, "connector");
- if (!fwnode)
- return -EINVAL;
-
- ret = fwnode_property_read_string(fwnode, "power-role", &buf);
- if (!ret) {
- role = typec_find_port_power_role(buf);
- if (role < 0)
- role = TYPEC_PORT_SNK;
- } else {
- role = TYPEC_PORT_SNK;
- }
- cap.type = role;
-
- ret = fwnode_property_read_string(fwnode, "data-role", &buf);
- if (!ret) {
- role = typec_find_port_data_role(buf);
- if (role < 0)
- role = TYPEC_PORT_UFP;
- } else {
- role = TYPEC_PORT_UFP;
- }
- cap.data = role;
-
- cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
- cap.fwnode = fwnode;
- qcom_usb->port = typec_register_port(dev, &cap);
- if (IS_ERR(qcom_usb->port)) {
- ret = PTR_ERR(qcom_usb->port);
- dev_err(dev, "Failed to register type c port %d\n", ret);
- goto err_put_node;
- }
- fwnode_handle_put(fwnode);
-
- qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev));
- if (IS_ERR(qcom_usb->role_sw)) {
- if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
- dev_err(dev, "failed to get role switch\n");
- ret = PTR_ERR(qcom_usb->role_sw);
- goto err_typec_port;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- goto err_usb_role_sw;
-
- ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
- qcom_pmic_typec_interrupt, IRQF_ONESHOT,
- "qcom-pmic-typec", qcom_usb);
- if (ret) {
- dev_err(&pdev->dev, "Could not request IRQ\n");
- goto err_usb_role_sw;
- }
-
- platform_set_drvdata(pdev, qcom_usb);
- qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type);
- qcom_pmic_typec_check_connection(qcom_usb);
-
- return 0;
-
-err_usb_role_sw:
- usb_role_switch_put(qcom_usb->role_sw);
-err_typec_port:
- typec_unregister_port(qcom_usb->port);
-err_put_node:
- fwnode_handle_put(fwnode);
-
- return ret;
-}
-
-static int qcom_pmic_typec_remove(struct platform_device *pdev)
-{
- struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
-
- usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
- qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
-
- typec_unregister_port(qcom_usb->port);
- usb_role_switch_put(qcom_usb->role_sw);
-
- return 0;
-}
-
-static const struct of_device_id qcom_pmic_typec_table[] = {
- { .compatible = "qcom,pm8150b-usb-typec" },
- { }
-};
-MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
-
-static struct platform_driver qcom_pmic_typec = {
- .driver = {
- .name = "qcom,pmic-typec",
- .of_match_table = qcom_pmic_typec_table,
- },
- .probe = qcom_pmic_typec_probe,
- .remove = qcom_pmic_typec_remove,
-};
-module_platform_driver(qcom_pmic_typec);
-
-MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
-MODULE_LICENSE("GPL v2");
--
2.33.0
