Hi Conor,
On Mon, Nov 8, 2021 at 4:07 PM <conor.dooley@xxxxxxxxxxxxx> wrote:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>
> Update the device tree for the icicle kit by splitting it into a third part,
> which contains peripherals in the fpga fabric, add new peripherals
> (spi, qspi, gpio, rtc, pcie, system services, i2c), update parts of the memory
> map which have been changed.
>
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Thanks for your patch!
Please split it into logical separated parts.
> --- /dev/null
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright (c) 2020-2021 Microchip Technology Inc */
> +
> +/ {
> + fpgadma: fpgadma@60020000 {
> + compatible = "microchip,mpfs-fpga-dma-uio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x60020000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <PLIC_INT_FABRIC_F2H_2>;
> + status = "okay";
> + };
> +
> + fpgalsram: fpga_lsram@61000000 {
> + compatible = "generic-uio";
> + reg = <0x0 0x61000000 0x0 0x0001000
> + 0x14 0x00000000 0x0 0x00010000>;
Please group by angular brackets, to increase readability, and support
automatic validation:
<0x0 0x61000000 0x0 0x0001000>, <0x14 0x00000000 0x0 0x00010000>
> + status = "okay";
> + };
Do we really want UIO nodes in upstream DT?
> +};
> diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> index fc1e5869df1b..4212129fcdf1 100644
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
> @@ -1,5 +1,5 @@
> // SPDX-License-Identifier: (GPL-2.0 OR MIT)
> -/* Copyright (c) 2020 Microchip Technology Inc */
> +/* Copyright (c) 2020-2021 Microchip Technology Inc */
>
> /dts-v1/;
>
> @@ -13,72 +13,187 @@ / {
> compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";
>
> aliases {
> - ethernet0 = &emac1;
> - serial0 = &serial0;
> - serial1 = &serial1;
> - serial2 = &serial2;
> - serial3 = &serial3;
> + mmuart0 = &mmuart0;
> + mmuart1 = &mmuart1;
> + mmuart2 = &mmuart2;
> + mmuart3 = &mmuart3;
> + mmuart4 = &mmuart4;
Why? SerialN is the standard alias name.
> };
>
> -&emac0 {
> +&spi0 {
> + status = "okay";
> + spidev@0 {
> + compatible = "spidev";
Please don't use "spidev", but a proper compatible value describing
what is really connected. If you want to use it with spidev (which
is software policy, not hardware description), add that compatible
value to drivers/spi/spidev.c:spidev_dt_ids[], or use driver_override
in sysfs at runtime.
> + reg = <0>; /* CS 0 */
> + spi-max-frequency = <10000000>;
> + status = "okay";
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
No slave devices specified?
> +};
> +
> +&qspi {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> + pac193x: pac193x@10 {
adc@, I guess?
> + compatible = "microchip,pac1934";
> + reg = <0x10>;
> + samp-rate = <64>;
> + status = "okay";
> + ch0: channel0 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDDREG";
> + channel_enabled;
> + };
> + ch1: channel1 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDDA25";
> + channel_enabled;
> + };
> + ch2: channel2 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDD25";
> + channel_enabled;
> + };
> + ch3: channel3 {
> + uohms-shunt-res = <10000>;
> + rail-name = "VDDA_REG";
> + channel_enabled;
> + };
> + };
> +};
> +&gpio2 {
> + interrupts = <PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT
> + PLIC_INT_GPIO2_NON_DIRECT>;
Why override interrupts in the board .dts file?
Doesn't this belong in the SoC .dtsi file?
Please group using angular brackets.
> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -145,49 +149,55 @@ cpu4_intc: interrupt-controller {
> soc {
> #address-cells = <2>;
> #size-cells = <2>;
> - compatible = "simple-bus";
> + compatible = "microchip,mpfs-soc", "simple-bus";
> ranges;
>
> - cache-controller@2010000 {
> + cctrllr: cache-controller@2010000 {
> compatible = "sifive,fu540-c000-ccache", "cache";
> + reg = <0x0 0x2010000 0x0 0x1000>;
> + interrupt-parent = <&plic>;
> + interrupts = <PLIC_INT_L2_METADATA_CORR
> + PLIC_INT_L2_METADAT_UNCORR
> + PLIC_INT_L2_DATA_CORR>;
Please group using angular brackets.
> cache-block-size = <64>;
> cache-level = <2>;
> cache-sets = <1024>;
> cache-size = <2097152>;
> cache-unified;
> - interrupt-parent = <&plic>;
> - interrupts = <1 2 3>;
> - reg = <0x0 0x2010000 0x0 0x1000>;
> };
>
> - clint@2000000 {
> + clint: clint@2000000 {
> compatible = "sifive,fu540-c000-clint", "sifive,clint0";
> reg = <0x0 0x2000000 0x0 0xC000>;
> - interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
> - &cpu1_intc 3 &cpu1_intc 7
> - &cpu2_intc 3 &cpu2_intc 7
> - &cpu3_intc 3 &cpu3_intc 7
> - &cpu4_intc 3 &cpu4_intc 7>;
> + interrupts-extended =
> + <&cpu0_intc HART_INT_M_SOFT &cpu0_intc HART_INT_M_TIMER
> + &cpu1_intc HART_INT_M_SOFT &cpu1_intc HART_INT_M_TIMER
> + &cpu2_intc HART_INT_M_SOFT &cpu2_intc HART_INT_M_TIMER
> + &cpu3_intc HART_INT_M_SOFT &cpu3_intc HART_INT_M_TIMER
> + &cpu4_intc HART_INT_M_SOFT &cpu4_intc HART_INT_M_TIMER>;
Please group using angular brackets.
> };
>
> plic: interrupt-controller@c000000 {
> - #interrupt-cells = <1>;
> - compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
> + compatible = "sifive,plic-1.0.0";
Why drop the first one again?
> reg = <0x0 0xc000000 0x0 0x4000000>;
> + #interrupt-cells = <1>;
> riscv,ndev = <186>;
> interrupt-controller;
> - interrupts-extended = <&cpu0_intc 11
> - &cpu1_intc 11 &cpu1_intc 9
> - &cpu2_intc 11 &cpu2_intc 9
> - &cpu3_intc 11 &cpu3_intc 9
> - &cpu4_intc 11 &cpu4_intc 9>;
> + interrupts-extended = <&cpu0_intc HART_INT_M_EXT
> + &cpu1_intc HART_INT_M_EXT &cpu1_intc HART_INT_S_EXT
> + &cpu2_intc HART_INT_M_EXT &cpu2_intc HART_INT_S_EXT
> + &cpu3_intc HART_INT_M_EXT &cpu3_intc HART_INT_S_EXT
> + &cpu4_intc HART_INT_M_EXT &cpu4_intc HART_INT_S_EXT>;
> };
>
> - dma@3000000 {
> - compatible = "sifive,fu540-c000-pdma";
> + pdma: pdma@3000000 {
> + compatible = "microchip,mpfs-pdma-uio";
> reg = <0x0 0x3000000 0x0 0x8000>;
> interrupt-parent = <&plic>;
> - interrupts = <23 24 25 26 27 28 29 30>;
> + interrupts = <PLIC_INT_DMA_CH0_DONE PLIC_INT_DMA_CH0_ERR
> + PLIC_INT_DMA_CH1_DONE PLIC_INT_DMA_CH1_ERR
> + PLIC_INT_DMA_CH2_DONE PLIC_INT_DMA_CH2_ERR
> + PLIC_INT_DMA_CH3_DONE PLIC_INT_DMA_CH3_ERR>;
Please group using angular brackets.
> #dma-cells = <1>;
> };
>
> @@ -205,7 +215,7 @@ clkcfg: clkcfg@20002000 {
> clocks = <&refclk>;
> #clock-cells = <1>;
> clock-output-names = "cpu", "axi", "ahb", "envm", /* 0-3 */
> - "mac0", "mac1", "mmc", "timer", /* 4-7 */
> + "mac0", "mac1", "mmc", "timer", /* 4-7 */
> "mmuart0", "mmuart1", "mmuart2", "mmuart3", /* 8-11 */
> "mmuart4", "spi0", "spi1", "i2c0", /* 12-15 */
> "i2c1", "can0", "can1", "usb", /* 16-19 */
No need for clock-output-names at all.
>
> - emac1: ethernet@20112000 {
> + mac0: ethernet@20110000 {
> compatible = "cdns,macb";
> - reg = <0x0 0x20112000 0x0 0x2000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0 0x20110000 0x0 0x2000>;
> + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
> + clock-names = "pclk", "hclk";
> interrupt-parent = <&plic>;
> - interrupts = <70 71 72 73>;
> - local-mac-address = [00 00 00 00 00 00];
> - clocks = <&clkcfg 5>, <&clkcfg 2>;
> + interrupts = <PLIC_INT_MAC0_INT
> + PLIC_INT_MAC0_QUEUE1
> + PLIC_INT_MAC0_QUEUE2
> + PLIC_INT_MAC0_QUEUE3
> + PLIC_INT_MAC0_EMAC
> + PLIC_INT_MAC0_MMSL>;
Please group using angular brackets.
> + mac-address = [56 34 12 00 FC 01];
Please drop this.
> status = "disabled";
> + };
>
> + rtc: rtc@20124000 {
> + compatible = "microchip,mpfs-rtc";
> #address-cells = <1>;
> #size-cells = <0>;
> + reg = <0x0 0x20124000 0x0 0x1000>;
> + clocks = <&clkcfg CLK_RTC>;
> + clock-names = "rtc";
> + interrupt-parent = <&plic>;
> + interrupts = <PLIC_INT_RTC_WAKEUP PLIC_INT_RTC_MATCH>;
Please group using angular brackets.
> + status = "disabled";
> };
>
> + usb: usb@20201000 {
> + compatible = "microchip,mpfs-usb-host";
> + reg = <0x0 0x20201000 0x0 0x1000>;
> + reg-names = "mc","control";
> + clocks = <&clkcfg CLK_USB>;
> + interrupt-parent = <&plic>;
> + interrupts = <PLIC_INT_USB_DMA PLIC_INT_USB_MC>;
Please group using angular brackets.
> + interrupt-names = "dma","mc";
> + dr_mode = "host";
> + status = "disabled";
> + };
> +
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
