On 2/11/2021 17:05, Mathias Nyman wrote:
On 1.11.2021 16.06, Alan Stern wrote:
On Sat, Oct 30, 2021 at 12:49:37PM +0800, Walt Jr. Brake wrote:
This patch make USB 3.1 device cannot be detected, and I report the bug [1]
to archlinux three month ago. Yesterday I try to fix it myself, and after I
revert this patch, compile the kernel and test, it works.
[1] https://bugs.archlinux.org/task/71660?project=1&pagenum=2
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 22ea1f4f2d66..73f4482d833a 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -148,10 +148,8 @@ static inline unsigned hub_power_on_good_delay(struct
usb_hub *hub)
{
unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
- if (!hub->hdev->parent) /* root hub */
- return delay;
- else /* Wait at least 100 msec for power to become stable */
- return max(delay, 100U);
+ /* Wait at least 100 msec for power to become stable */
+ return max(delay, 100U);
}
Mathias:
It looks like the bPwrOn2PwrGood value in xhci-hcd's hub descriptor is
too small for some USB 3.1 devices.
Can you look into this?
Alan Stern
At first glance the xhci roothub bPwrOn2PwrGood value looks ok.
xhci spec 5.4.8 states software should wait 20ms after asserting PP, before
attempting to change the state of the port.
xhci driver sets desc->bPwrOn2PwrGood = 10; (2ms interval, so equals 20ms )
We should probably get this working immediately, so maybe revert that patch
while looking into the rootcause.
Walt Jr. Brake, instead of reverting that patch, could you test if changing the
xhci roothub bPwrOn2PwrGood value helps.
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a3f875eea751..756231a55602 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -257,7 +257,7 @@ static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
{
u16 temp;
- desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
+ desc->bPwrOn2PwrGood = 50; /* The 20ms in xhci 5.4.8 isn't enough for USB 3.1 */
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
Thanks
-Mathias
Mathias:
Sorry to reply lately. I test with your patch, it works.
I also test with setting bPwrOn2PwrGood to 45, and it not work.
Seems that the minimal value should be 50 for this case.
