The masks are swapped (interrupts are enabled when the mask is 0).
This caused inability of the driver to recognize cable unplug events
in host mode (where only comparator interrupt is generated, and VBUS
interrupt is not).
Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
---
drivers/usb/typec/tcpm/fusb302.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 7a2a17866a823..72f9001b07921 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
- FUSB_REG_MASK_COMP_CHNG);
+ FUSB_REG_MASK_BC_LVL);
if (ret < 0) {
fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
ret);
goto done;
}
chip->intr_comp_chng = true;
+ chip->intr_bc_lvl = false;
break;
case TYPEC_CC_RD:
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
- FUSB_REG_MASK_BC_LVL);
+ FUSB_REG_MASK_COMP_CHNG);
if (ret < 0) {
fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
ret);
goto done;
}
chip->intr_bc_lvl = true;
+ chip->intr_comp_chng = false;
break;
default:
break;
--
2.33.1
