Linux USB Users

• Thread Index

• Re: [PATCH v3] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: core: Fix double unlock in usb_gadget_activate()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: core: Fix double unlock in usb_gadget_activate()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH V4] dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• Re: [PATCH] usb: host: xhci: parameterize Renesas delay/retry
  • From: Anne Macedo <retpolanne@xxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: parameterize Renesas delay/retry
  • From: retpolanne@xxxxxxxxxx
• Re: [PATCH] usb: host: xhci: parameterize Renesas delay/retry
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: parameterize Renesas delay/retry
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: host: xhci: parameterize Renesas delay/retry
  • From: Anne Macedo <retpolanne@xxxxxxxxxx>
• Re: [PATCH v3] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller
  • From: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
• [PATCH v3] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [GIT PULL] USB driver fixes for 6.4-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] USB driver fixes for 6.4-rc7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Do not create endpoint debugfs while holding the bandwidth mutex
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: usb: dwc3: HC dies under high I/O load on Exynos5422
  • From: Jakub Vaněk <linuxtardis@xxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• RE: [PATCH 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
  • From: "Patel, Utkarsh H" <utkarsh.h.patel@xxxxxxxxx>
• [westeri-thunderbolt:next] BUILD SUCCESS 481012b479fe6d8dd4e01d739c359a8d99d074a9
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION f7efed9f38f886edb450041b82a6f15d663c98f8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  • From: <Varshini.Rajendran@xxxxxxxxxxxxx>
• [syzbot] [media?] [usb?] WARNING in imon_probe
  • From: syzbot <syzbot+1c41b2e045dc086f58be@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: usb: dwc3: HC dies under high I/O load on Exynos5422
  • From: Jakub Vaněk <linuxtardis@xxxxxxxxx>
• Re: usb: dwc3: HC dies under high I/O load on Exynos5422
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [v4,2/2] usb: typec: tcpm: add get max power support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v4,1/2] usb: typec: tcpm: fix cc role at port reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [v4,2/2] usb: typec: tcpm: add get max power support
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• [v4,1/2] usb: typec: tcpm: fix cc role at port reset
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• Re: [usb:usb-next] BUILD SUCCESS WITH WARNING df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 00/20] thunderbolt: Initial USB4 v2 support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [usb:usb-next] BUILD SUCCESS WITH WARNING df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: usb: typec: tcpm: fix cc role at port reset
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: usb: typec: tcpm: add get max power support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: usb: typec: tcpm: add get max power support
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• usb: dwc3: HC dies under high I/O load on Exynos5422
  • From: Jakub Vaněk <linuxtardis@xxxxxxxxx>
• Re: usb: typec: tcpm: fix cc role at port reset
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• Re: usb: typec: tcpm: fix cc role at port reset
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: usb: typec: tcpm: add get max power support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• usb: typec: tcpm: add get max power support
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• [PATCH v3] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx>
• usb: typec: tcpm: fix cc role at port reset
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: tcpm: add get max power support
  • From: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS WITH WARNING 88d8f3ac9c67e2d00db671dbb0af50efb7c358cb
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [usb:usb-next] BUILD SUCCESS WITH WARNING df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc: core: Fix double unlock in usb_gadget_activate()
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: function: printer: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• Re: [PATCH v2] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH v3] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH v2] usb: gadget: function: printer: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 925294c9aa184801cc0a451b69a18dd0fe7d847d
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: Fix fast_role_swap_current show function
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: uvc: Move usb_ep_disable() to uvcg_video_enable()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] usb: gadget: udc: core: Fix double unlock in usb_gadget_activate()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• [PATCH][next] usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.14 6/6] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 8/8] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 8/9] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 8/8] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 08/10] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 12/16] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.3 14/19] usb: gadget: udc: fix NULL dereference in remove()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v2] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx>
• [PATCH v4 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v4 0/2] typec: add support for the ON Semiconductor nb7vpq904m Type-C Linear Redriver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: thunderbolt: resume from hibernation CPUs racing in tb_ring_start
  • From: Brian Geffon <bgeffon@xxxxxxxxxx>
• Re: (subset) [PATCH v2 3/8] autofs: set ctime as well when mtime changes on a dir
  • From: Ian Kent <raven@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: wang xiaolei <xiaolei.wang@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 1/1] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: USB: add uapi header files to USB SUBSYSTEM entry
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: tcpm: add get max power support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: uvc: Move usb_ep_disable() to uvcg_video_enable()
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] USB: usbip: fix stub_dev hub disconnect
  • From: Jonas Blixt <jonas.blixt@xxxxxxxx>
• Re: [PATCH] USB: usbip: fix stub_dev hub disconnect
  • From: Jonas Blixt <jonas.blixt@xxxxxxxx>
• Re: [PATCH 14/21] clk: at91: sam9x7: add sam9x7 pmc driver
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 13/21] clk: at91: sam9x7: add support for HW PLL freq dividers
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 12/21] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 11/21] ARM: at91: add support in soc driver for new sam9x7
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 10/21] ARM: at91: Kconfig: add config flag for SAM9X7 SoC
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 09/21] ARM: at91: pm: add sam9x7 soc init config
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 08/21] ARM: at91: pm: add support for sam9x7 soc family
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: thunderbolt: resume from hibernation CPUs racing in tb_ring_start
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2] usbip: usbip_host: Replace strlcpy with strscpy
  • From: kernel test robot <lkp@xxxxxxxxx>
• thunderbolt: resume from hibernation CPUs racing in tb_ring_start
  • From: Brian Geffon <bgeffon@xxxxxxxxxx>
• Re: [PATCH 20/21] dt-bindings: net: cdns,macb: add documentation for sam9x7 ethernet interface
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/21] dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/21] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION b16049b21162bb649cdd8519642a35972b7910fe
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usb: gadget: function: printer: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: phy: mxs: add DT bindings to hold data line
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: function: printer: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• Re: [PATCH] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH v2] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 3/3] usb: typec: fsa4480: add support for Audio Accessory Mode
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] usb: typec: fsa4480: rework mux & switch setup to handle more states
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] usb: typec: fsa4480: add support for Audio Accessory Mode
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 2/3] usb: typec: fsa4480: rework mux & switch setup to handle more states
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/3] usb: typec: ucsi: call typec_set_mode on non-altmode partner change
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/3] typec: support Audio Accessory mode on FSA4480
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: phy: mxs: add DT bindings to hold data line
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH 1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v4 1/5] usb: phy: add usb phy notify port status API
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v4 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v4 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v4 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 3/8] autofs: set ctime as well when mtime changes on a dir
  • From: Christian Brauner <brauner@xxxxxxxxxx>
• Re: [PATCH v4 4/4] MAINTAINERS: add Cadence USBHS driver entry
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• RE: [PATCH v4 4/4] MAINTAINERS: add Cadence USBHS driver entry
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Prashanth K <quic_prashk@xxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: Put the cdns set active part outside the spin lock
  • From: wangxiaolei <xiaolei.wang@xxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [usb:usb-testing] BUILD SUCCESS WITH WARNING 53d061c19dc4cb68409df6dc11c40389c8c42a75
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 286d9975a838d0a54da049765fa1d1fb96b89682
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 1f6ce8392d6ff486af5ca96df9ded5882c4b6977
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: function: printer: Replace strlcpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi: Fix command cancellation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi: Fix command cancellation
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi: Fix command cancellation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: ucsi: Fix command cancellation
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [PATCH v3 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v3 1/2] dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/2] typec: add support for the ON Semiconductor nb7vpq904m Type-C Linear Redriver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH] USB: serial: option: add u-blox LARA-R6 01B modem
  • From: Davide Tronchin <davide.tronchin.94@xxxxxxxxx>
• Re: [PATCH v3 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V3] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH V3] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• Re: [PATCH v3 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: usbip: fix stub_dev hub disconnect
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] MAINTAINERS: add Cadence USBHS driver entry
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: usbip: fix stub_dev hub disconnect
  • From: Jonas Blixt <jonas.blixt@xxxxxxxx>
• [PATCH] USB: serial-simple: adding Kaufmann RKS+CAN VCP
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v3] usb: core: add sysfs entry for usb device state
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: Cypress CDC ACM serial port not working correctly with autosuspend
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v4 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/8] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 6/8] arm64: dts: qcom: sm8550: add ports subnodes in usb/dp qmpphy node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: qcom: sm8550-qrd: add pmic glink port/endpoints
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 4/8] qcom: pmic_glink_altmode: add retimer-switch support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 2/8] soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/8] arm64: qcom: add Type-C Altmode support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v2 3/8] autofs: set ctime as well when mtime changes on a dir
  • From: Ian Kent <raven@xxxxxxxxxx>
• [PATCH] usbip: usbip_host: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• [PATCH] usb: gadget: function: printer: Replace strlcpy with strscpy
  • From: Azeem Shaikh <azeemshaikh38@xxxxxxxxx>
• Re: [PATCH] usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [westeri-thunderbolt:next] BUILD SUCCESS 87200371817ec6e48e42ef2f03756268661a8815
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Cypress CDC ACM serial port not working correctly with autosuspend
  • From: Michael Laß <bevan@xxxxxxxxx>
• Re: [PATCH] xhci: Do not create endpoint debugfs while holding the bandwidth mutex
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] cifs: update the ctime on a partial page write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• Re: [PATCH v2 8/8] cifs: update the ctime on a partial page write
  • From: Tom Talpey <tom@xxxxxxxxxx>
• [PATCH v2 8/8] cifs: update the ctime on a partial page write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 7/8] apparmor: update ctime whenever the mtime changes on an inode
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 3/8] autofs: set ctime as well when mtime changes on a dir
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 1/8] ibmvmc: update ctime in conjunction with mtime on write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 0/8] fs: add some missing ctime updates
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 5/8] efivarfs: update ctime when mtime changes on a write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 2/8] usb: update the ctime as well when updating mtime after an ioctl
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 4/8] bfs: update ctime in addition to mtime when adding entries
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH v2 6/8] exfat: ensure that ctime is updated whenever the mtime is
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• Re: [PATCH 7/9] gfs2: update ctime when quota is updated
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 09/20] thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 10/20] thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 16/20] thunderbolt: Add support for enhanced uni-directional TMU mode
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 15/20] thunderbolt: Increase NVM_MAX_SIZE to support Intel Barlow Ridge controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 11/20] thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 19/20] thunderbolt: Add DisplayPort 2.x tunneling support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 17/20] thunderbolt: Enable CL2 low power state
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 18/20] thunderbolt: Make bandwidth allocation mode function names consistent
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 20/20] thunderbolt: Add test case for 3 DisplayPort tunnels
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 07/20] thunderbolt: Announce USB4 v2 connection manager support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 14/20] thunderbolt: Move constants related to NVM into nvm.c
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 13/20] thunderbolt: Limit Intel Barlow Ridge USB3 bandwidth
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 02/20] thunderbolt: Do not touch lane 1 adapter path config space
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 00/20] thunderbolt: Initial USB4 v2 support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 08/20] thunderbolt: Enable USB4 v2 PCIe TLP/DLLP extended encapsulation
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 03/20] thunderbolt: Identify USB4 v2 routers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 12/20] thunderbolt: Add Intel Barlow Ridge PCI ID
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 01/20] thunderbolt: Ignore data CRC mismatch for USB4 routers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 05/20] thunderbolt: Add the new USB4 v2 notification types
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 06/20] thunderbolt: Reset USB4 v2 host router
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 04/20] thunderbolt: Add support for USB4 v2 80 Gb/s link
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH 0/3] thunderbolt: Few improvements for retimer access
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [Bug 217399] Kernel OOPS on boot with Kernel 6.3(.1) and RTL8153 Gigabit Ethernet Adapter
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [syzbot] [tomoyo?] [fs?] INFO: rcu detected stall in newfstatat (3)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [syzbot] [tomoyo?] [fs?] INFO: rcu detected stall in newfstatat (3)
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] [tomoyo?] [fs?] INFO: rcu detected stall in newfstatat (3)
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [syzbot] [tomoyo?] [fs?] INFO: rcu detected stall in newfstatat (3)
  • From: syzbot <syzbot+96127c74434e19e4609d@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [westeri-thunderbolt:next] BUILD SUCCESS 53ba2e16957b01eb7858e3ee5a3a8187a2892f15
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [syzbot] [usb?] INFO: task hung in hub_port_init (3)
  • From: syzbot <syzbot+b6f11035e572f08bc20f@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 53ab6975c12d1ad86c599a8927e8c698b144d669
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 7/9] gfs2: update ctime when quota is updated
  • From: Andreas Gruenbacher <agruenba@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/9] fs: add some missing ctime updates
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• Re: [PATCH 0/9] fs: add some missing ctime updates
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] usb: update the ctime as well when updating mtime after an ioctl
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/9] autofs: set ctime as well when mtime changes on a dir
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 9/9] cifs: update the ctime on a partial page write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 5/9] efivarfs: update ctime when mtime changes on a write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 6/9] exfat: ensure that ctime is updated whenever the mtime is
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 8/9] apparmor: update ctime whenever the mtime changes on an inode
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 7/9] gfs2: update ctime when quota is updated
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 2/9] usb: update the ctime as well when updating mtime after an ioctl
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 4/9] bfs: update ctime in addition to mtime when adding entries
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 0/9] fs: add some missing ctime updates
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 1/9] ibmvmc: update ctime in conjunction with mtime on write
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• Re: [PATCH net-next v4 1/4] usbnet: ipheth: fix risk of NULL pointer deallocation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• Re: [PATCH net-next v4 1/4] usbnet: ipheth: fix risk of NULL pointer deallocation
  • From: George Valkov <gvalkov@xxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next v4 1/4] usbnet: ipheth: fix risk of NULL pointer deallocation
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: [PATCH 00/20] thunderbolt: Rework TMU and CLx support
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [lvc-project] [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] thunderbolt: handle possible NULL pointer from get_device()
  • From: Dmitry Antipov <dmantipov@xxxxxxxxx>
• Re: [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v15 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
  • From: <Dharma.B@xxxxxxxxxxxxx>
• [PATCH v2] usb: dwc2: add pci_device_id driver_data parse support
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH V2 1/1] net: usb: qmi_wwan: add support for Compal RXM-G1
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• RE: [EXT] Re: [PATCH] usb: typec: tcpci: allow drp toggling for non-drp port
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v8 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH v7 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v8 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v8 1/2] usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: kernel test robot <lkp@xxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 7b672f282cf4712cb392ef798f0305cc4de32454
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v7 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• [PATCH v7 1/2] usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: Fix fast_role_swap_current show function
  • From: Benson Leung <bleung@xxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION db10f126048021b86e43a5d6a335ec49dec10155
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: typec: tcpci: allow drp toggling for non-drp port
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] usb: typec: tcpci: allow drp toggling for non-drp port
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: "Mehta, Piyush" <piyush.mehta@xxxxxxx>
• Re: [PATCH v13 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 7/8] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v2 8/8] arm64: dts: qcom: sm8550-qrd: add pmic glink port/endpoints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v14 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v14 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v13 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v13 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• RE: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: PROBLEM: kernel NULL pointer dereference when yanking ftdi usb-serial during BREAK
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1] usb: dwc2: add pci_device_id driver_data parse support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] USB-serial device ids for 6.4-rc6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: dwc2: add pci_device_id driver_data parse support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• RE: [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v1] usb: dwc2: add pci_device_id driver_data parse support
  • From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• RE: [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• RE: [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: Fix fast_role_swap_current show function
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• RE: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• RE: [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V2 1/1] net: usb: qmi_wwan: add support for Compal RXM-G1
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v3 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v3 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v6 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: PROBLEM: kernel NULL pointer dereference when yanking ftdi usb-serial during BREAK
  • From: Dongliang Mu <mudongliangabcd@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH V2 1/1] net: usb: qmi_wwan: add support for Compal RXM-G1
  • From: Wes Huang <wes155076@xxxxxxxxx>
• Re: [PATCH 1/1] net: usb: qmi_wwan: add support for Compal RXM-G1
  • From: Wes Huang <wes155076@xxxxxxxxx>
• PROBLEM: kernel NULL pointer dereference when yanking ftdi usb-serial during BREAK
  • From: Nick Bowler <nbowler@xxxxxxxxxx>
• RE: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• RE: [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
• [PATCH v4] usb: core: add sysfs entry for usb device state
  • From: Roy Luo <royluo@xxxxxxxxxx>
• Re: [PATCH v3] usb: core: add sysfs entry for usb device state
  • From: Roy Luo <royluo@xxxxxxxxxx>
• Re: [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] usb: core: add sysfs entry for usb device state
  • From: Roy Luo <royluo@xxxxxxxxxx>
• Re: Cypress CDC ACM serial port not working correctly with autosuspend
  • From: Warren Togami <wtogami@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: f_mass_storage: remove unnecessary open check
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: gadget: f_mass_storage: remove unnecessary open check
  • From: David Disseldorp <ddiss@xxxxxxx>
• Re: [PATCH v3] usb: gadget: uvc: clean up comments and styling in video_pump
  • From: Avichal Rakesh <arakesh@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2] usb: typec: Fix fast_role_swap_current show function
  • From: Pavan Holla <pholla@xxxxxxxxxxxx>
• Re: [PATCH] usb: typec: Fix fast_role_swap_current show function
  • From: Pavan Holla <pholla@xxxxxxxxxxxx>
• Re: [PATCH v12 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3] usb: core: add sysfs entry for usb device state
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] usb: core: add sysfs entry for usb device state
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH][stable-4.{14,19}.y 0/3] net: cdc_ncm: Backport fixes
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 1/2] usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION abbd8bb42915d9ed06df11b430bf4ecb3d8ac5ad
  • From: kernel test robot <lkp@xxxxxxxxx>
• [GIT PULL] USB-serial device ids for 6.4-rc6
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: Cannot access device / WD Portable Game Drive 5.0 TB USB Inbox
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Cypress CDC ACM serial port not working correctly with autosuspend
  • From: Michael Laß <bevan@xxxxxxxxx>
• Re: [PATCH] usb: gadget: f_mass_storage: remove unnecessary open check
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v4 3/4] usbnet: ipheth: add CDC NCM support
  • From: Foster Snowhill <forst@xxxxxx>
• [PATCH net-next v4 1/4] usbnet: ipheth: fix risk of NULL pointer deallocation
  • From: Foster Snowhill <forst@xxxxxx>
• [PATCH net-next v4 2/4] usbnet: ipheth: transmit URBs without trailing padding
  • From: Foster Snowhill <forst@xxxxxx>
• [PATCH net-next v4 4/4] usbnet: ipheth: update Kconfig description
  • From: Foster Snowhill <forst@xxxxxx>
• Re: Cypress CDC ACM serial port not working correctly with autosuspend
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 0/2] USB: dwc3: qcom: fix NULL-deref on suspend
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 2/2] USB: dwc3: fix use-after-free on core driver unbind
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• [PATCH 0/9] Enable IPQ5332 USB2
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/9] dt-bindings: usb: dwc3: Add IPQ5332 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 9/9] arm64: defconfig: Enable QCOM M31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 8/9] arm64: dts: qcom: ipq5332: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 5/9] phy: qcom-m31: Introduce qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 7/9] arm64: dts: qcom: ipq5332: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 6/9] phy: qcom: Add qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 2/9] dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 3/9] phy: qcom-m31: Introduce qcom,m31 USB phy driver
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH 4/9] clk: qcom: ipq5332: Fix USB related clock defines
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 4/5] arm64: dts: qcom: ipq9574: Add LDO regulator node
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 0/5] Enable IPQ9754 USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 5/5] arm64: dts: qcom: ipq9574: Enable USB
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 1/5] dt-bindings: usb: dwc3: Add IPQ9574 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 2/5] clk: qcom: gcc-ipq9574: Add USB related clocks
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v12 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: f_mass_storage: remove unnecessary open check
  • From: David Disseldorp <ddiss@xxxxxxx>
• [PATCH v2 5/8] qcom: pmic_glink: enable altmode for SM8550
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 6/8] arm64: dts: qcom: sm8550: add ports subnodes in usb/dp qmpphy node
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 7/8] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 8/8] arm64: dts: qcom: sm8550-qrd: add pmic glink port/endpoints
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 4/8] qcom: pmic_glink_altmode: add retimer-switch support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/8] soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 3/8] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/8] arm64: qcom: add Type-C Altmode support
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH v2 1/2] dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v2 0/2] typec: add support for the ON Semiconductor nb7vpq904m Type-C Linear Redriver
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: firmware: add reset-controller property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] usb: gadget: udc: udc-xilinx: Add identifier to read_fn function arg
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• Re: USB issue on a TB4 controller?
  • From: Christian Schaubschläger <christian.schaubschlaeger@xxxxxx>
• [PATCH 2/2] dt-bindings: firmware: add reset-controller property
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• [PATCH 1/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• [PATCH 0/2] dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yaml
  • From: Piyush Mehta <piyush.mehta@xxxxxxx>
• [PATCH v3 5/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v3 2/5] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v3 3/5] phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v3 1/5] usb: phy: add usb phy notify port status API
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
  • From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: f_mass_storage: remove unnecessary open check
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: f_mass_storage: remove unnecessary open check
  • From: David Disseldorp <ddiss@xxxxxxx>
• [linux-next:master] BUILD REGRESSION 6db29e14f4fb7bce9eb5290288e71b05c2b0d118
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/3] USB: serial: return errors from break handling
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH] usb: typec: ucsi: Fix command cancellation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] USB: serial: return errors from break handling
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 1/3] USB: serial: return errors from break handling
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 0/3] USB: serial: return errors from break handling
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2 1/3] USB: serial: return errors from break handling
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 2/2] drivers: usb: musb: musb_gadget: replaced bare unsigned to unsigned int
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: usb: musb: musb_gadget: Removed unneeded code
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] drivers: usb: musb: musb_gadget: replaced bare unsigned to unsigned int
  • From: Neel Chakraborty <neelchakrabortykernelwork@xxxxxxxxx>
• [PATCH] drivers: usb: musb: musb_gadget: Removed unneeded code
  • From: Neel Chakraborty <neelchakrabortykernelwork@xxxxxxxxx>
• Re: [PATCH] drivers: usb: musb: musb_gadget: fixed coding style issues and removed unneeded code
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget/snps_udc_plat: Fix a signedness bug in probe
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] usb: gadget/snps_udc_plat: Fix a signedness bug in probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [thunderbolt] Regression in v6.1.30, WARNING accessing sysfs boot_acl
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [thunderbolt] Regression in v6.1.30, WARNING accessing sysfs boot_acl
  • From: Torsten Hilbrich <torsten.hilbrich@xxxxxxxxxxx>
• [PATCH] usb: gadget/snps_udc_plat: Fix a signedness bug in probe
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] drivers: usb: musb: musb_gadget: fixed coding style issues and removed unneeded code
  • From: Neel Chakraborty <neelchakrabortykernelwork@xxxxxxxxx>
• Re: make localmodconfig doesn't work for thunderbolt
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH] usb: typec: Fix fast_role_swap_current show function
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: make localmodconfig doesn't work for thunderbolt
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH] usb: typec: Fix fast_role_swap_current show function
  • From: Benson Leung <bleung@xxxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 592295e61b5c51ea89fd1959932fd0f121f08c46
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3] usb: core: add sysfs entry for usb device state
  • From: Roy Luo <royluo@xxxxxxxxxx>
• [usb:rndis-removal] BUILD SUCCESS 1982b6ea136091eca738583937296c52473ade70
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] usb: typec: Fix fast_role_swap_current show function
  • From: Pavan Holla <pholla@xxxxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: use dev_err_probe() where appropriate
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS WITH WARNING d37537a1f7cf09e304fe7993cb5e732534a0fb22
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 9ca10bfb8aa8fbf19ee22e702c8cf9b66ea73a54
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 21/21] net: macb: add support for gmac to sam9x7
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH 03/21] dt-bindings: usb: generic-ehci: Document clock-names property
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: Break doesn't work on a CP2105
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH 21/21] net: macb: add support for gmac to sam9x7
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH][stable-4.{14,19}.y 1/3] cdc_ncm: Implement the 32-bit version of NCM Transfer Block
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH][stable-4.{14,19}.y 3/3] net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH][stable-4.{14,19}.y 2/3] cdc_ncm: Fix the build warning
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH][stable-4.{14,19}.y 0/3] net: cdc_ncm: Backport fixes
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 21/21] net: macb: add support for gmac to sam9x7
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: xilinx: Replace Manish by Piyush
  • From: Michal Simek <monstr@xxxxxxxxx>
• Re: [GIT PULL] Thunderbolt/USB4 fixes for v6.4-rc6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 3/7] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/7] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: USB driver assignment request
  • From: Rainer Kaufmann <shop@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/21] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] USB: serial: return errors from break handling
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH RFC 1/7] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [GIT PULL] Thunderbolt/USB4 fixes for v6.4-rc6
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/21] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60 compatible
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: Break doesn't work on a CP2105
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 21/21] net: macb: add support for gmac to sam9x7
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 20/21] dt-bindings: net: cdns,macb: add documentation for sam9x7 ethernet interface
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/21] ARM: configs: at91: add mcan support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/21] dt-bindings: usb: generic-ehci: Document clock-names property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/21] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Enable/disable sideband depending on USB4 port offline mode
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: USB driver assignment request
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [EXT] Re: [PATCH 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH 2/2] usb: typec: intel_pmc_mux: Configure Active and Retimer Cable type
  • From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
• [PATCH 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
  • From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
• [PATCH 0/2] Add support to configure active retimer cable
  • From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
• Re: [PATCH v2] usb: core: add sysfs entry for usb device state
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• Re: [PATCH 3/3] usb: chipidea: imx: add missing USB PHY DPDM wakeup setting
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 2/3] usb: chipidea: imx: turn off vbus comparator when suspend
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 1/3] usb: chipidea: imx: remove one duplicated reg define
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: cdns3: imx: simplify clock name usage
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: chipidea: imx: don't request QoS for imx8ulp
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH] usb: cdns3: imx: Rework system PM to avoid duplicated operations
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 1/2] usb: cdns3: improve handling of unaligned address case
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: cdns3: optimize OUT transfer by copying only actual received data
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• Re: [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 0/3] USB: serial: return errors from break handling
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: Break doesn't work on a CP2105
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH 14/21] clk: at91: sam9x7: add sam9x7 pmc driver
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [BUG] Potential race condition in usbip attach
  • From: Alexander Timofeev <alex42timofeev@xxxxxxxxx>
• [PATCH] usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [GIT PULL] USB driver fixes for 6.4-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v2 1/3] USB: serial: return errors from break handling
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 2/3] USB: serial: cp210x: disable break signalling on CP2105 SCI
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 3/3] USB: serial: report unsupported break signalling
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 0/3] USB: serial: return errors from break handling
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: Break doesn't work on a CP2105
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] usb: usb251xb: Use of_property_read_u16()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [syzbot] [mm?] [usb?] memory leak in new_inode (2)
  • From: syzbot <syzbot+ea01ee90cdba474c187b@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Enable/disable sideband depending on USB4 port offline mode
  • From: Yehezkel Bernat <yehezkelshb@xxxxxxxxx>
• [GIT PULL] USB driver fixes for 6.4-rc5
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: uvc: clean up comments and styling in video_pump
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: uvc: clean up comments and styling in video_pump
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: gadget: uvc: clean up comments and styling in video_pump
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Enable/disable sideband depending on USB4 port offline mode
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Cypress CDC ACM serial port not working correctly with autosuspend
  • From: Warren Togami <wtogami@xxxxxxxxx>
• Re: [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 03/21] dt-bindings: usb: generic-ehci: Document clock-names property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC 1/7] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 20/21] dt-bindings: net: cdns,macb: add documentation for sam9x7 ethernet interface
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 19/21] power: reset: at91-reset: add sdhwc support for sam9x7 soc
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 18/21] power: reset: at91-reset: add reset support for sam9x7 soc
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 21/21] net: macb: add support for gmac to sam9x7
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 14/21] clk: at91: sam9x7: add sam9x7 pmc driver
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 16/21] irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 13/21] clk: at91: sam9x7: add support for HW PLL freq dividers
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 12/21] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 11/21] ARM: at91: add support in soc driver for new sam9x7
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 10/21] ARM: at91: Kconfig: add config flag for SAM9X7 SoC
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 09/21] ARM: at91: pm: add sam9x7 soc init config
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 08/21] ARM: at91: pm: add support for sam9x7 soc family
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 07/21] ARM: configs: at91: Enable csi and isc support
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 05/21] ARM: configs: at91: enable config flags for sam9x7 SoC
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 06/21] ARM: configs: at91: add mcan support
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 03/21] dt-bindings: usb: generic-ehci: Document clock-names property
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 02/21] dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 01/21] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60 compatible
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH 00/21] Add support for sam9x7 SoC family
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] thunderbolt: Enable/disable sideband depending on USB4 port offline mode
  • From: Yehezkel Bernat <yehezkelshb@xxxxxxxxx>
• Re: [PATCH RFC 1/7] dt-bindings: connector: usb-connector: add a gpio used to determine the Type-C port plug orientation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3] usb: gadget: uvc: clean up comments and styling in video_pump
  • From: Avichal Rakesh <arakesh@xxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: uvc: queue empty isoc requests if no video buffer is available
  • From: Avichal Rakesh <arakesh@xxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: uvc: queue empty isoc requests if no video buffer is available
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: uvc: queue empty isoc requests if no video buffer is available
  • From: Avichal Rakesh <arakesh@xxxxxxxxxx>
• [PATCH v2] usb: gadget: uvc: queue empty isoc requests if no video buffer is available
  • From: Avichal Rakesh <arakesh@xxxxxxxxxx>
• Re: [syzbot] [usb?] kernel BUG in cdc_ncm_fill_tx_frame
  • From: syzbot <syzbot+1994e2ecf323ed90f255@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [syzbot] [net?] [usb?] kernel BUG in cdc_ncm_fill_tx_frame
  • From: syzbot <syzbot+1994e2ecf323ed90f255@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: dwc3: Modify runtime pm ops to handle bus suspend
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v5 2/3] usb: gadget: udc: core: Invoke usb_gadget_connect only when started
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v5 3/3] usb: gadget: udc: core: Prevent UDC from starting when unbound
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: [PATCH v5 1/3] usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  • From: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
• Re: Break doesn't work on a CP2105
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH] usb: gadget: uvc: queue empty isoc requests if no video buffer is available
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 11/11] xhci: Add ZHAOXIN xHCI host U1/U2 feature support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 10/11] xhci: Show ZHAOXIN xHCI root hub speed correctly
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 09/11] xhci: Fix TRB prefetch issue of ZHAOXIN hosts
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 07/11] xhci: Stop unnecessary tracking of free trbs in a ring
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>