[RFC PATCH v1 07/12] soc: qcom: pmic_glink_altmode: report that this is a Type-C connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Set the bridge's path property to point out that this connector is
wrapped into the Type-C port.

We can not really identify the exact Type-C port because it is
registered separately, by another driver, which is not mandatory and the
corresponding device is not even present on some of platforms, like
sc8180x or sm8350. Thus we use the shortened version of the PATH, which
includes just the 'typec:' part.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/soc/qcom/pmic_glink_altmode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
index 974c14d1e0bf..a5b72046caaa 100644
--- a/drivers/soc/qcom/pmic_glink_altmode.c
+++ b/drivers/soc/qcom/pmic_glink_altmode.c
@@ -466,6 +466,7 @@ static int pmic_glink_altmode_probe(struct auxiliary_device *adev,
 		alt_port->bridge.of_node = to_of_node(fwnode);
 		alt_port->bridge.ops = DRM_BRIDGE_OP_HPD;
 		alt_port->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
+		alt_port->bridge.path = "typec:";
 
 		ret = devm_drm_bridge_add(dev, &alt_port->bridge);
 		if (ret)
-- 
2.39.2




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux