Hi,
On Thu, Sep 7, 2023 at 1:41 AM Jisheng Zhang <jszhang@xxxxxxxxxx> wrote:
>
> On Wed, Sep 06, 2023 at 01:32:22AM +0000, Thinh Nguyen wrote:
> > On Mon, Sep 04, 2023, Bagas Sanjaya wrote:
> > > On Sun, Sep 03, 2023 at 09:19:13PM +0900, Kenta Sato wrote:
> > > > Hi,
> > > >
> > > > I am using the FriendlyElec NanoPi R4S board.
> > > > When I update the kernel from 6.4.7 to 6.4.11, 6.4.13, and 6.5.1, it
> > > > doesn't recognize some USB devices.
> > > >
> > > > The board has two USB 3.0 ports. I connected 1) BUFFALO USB Flash Disk
> > > > (high-speed) and 2) NETGEAR A6210 (SuperSpeed) to each port.
> > > > 1) is often not recognized. On the other hand, 2) was working while I
> > > > was testing.
> > > > Regardless of whether a USB device is connected, I could see the below
> > > > message on dmesg:
>
> Hi Kenta,
>
>
> Besides the comments and patch from Thinh, may I know some details of
> your HW and SW env? Such as
>
> From HW support points of view, is the usb3.0 ports dual mode or host only?
The board should be designed for host-only as it has two USB 3.0 Type-A ports.
>
> From SW side, how do you configure the host controller? I.E set dual
> mode or host only?
According to the device tree file in the kernel source tree
(arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi), it is configured
as host only.
&usbdrd_dwc3_1 {
dr_mode = "host";
status = "okay";
};
>
> Lastly, did you have modifications or local patches to dwc3 driver?
No, except for reverting the commit I mentioned in the first post.
Right now I am using the tag 6.5.1 with a few small patches. You can
find them and config in the link below.
https://github.com/Tosainu/PKGBUILDs/tree/a460f4826e44d666661f3049413628f3064a2751/core/linux-aarch64
>
> Thanks in advance
>
> > > >
> > > > [ 0.740993] phy phy-ff7c0000.phy.8: phy poweron failed --> -110
> > > > [ 0.741585] dwc3 fe800000.usb: error -ETIMEDOUT: failed to initialize core
> > > > [ 0.742334] dwc3: probe of fe800000.usb failed with error -110
> > > > [ 0.751635] rockchip-usb2phy ff770000.syscon:usb2phy@e460:
> > > > Requested PHY is disabled
> > > >
> > > > Is there any idea on this?
> > > >
> > > > The cause seems to be related to this commit. I tried reverting this
> > > > change and the issue seemed to be solved.
> > > >
> > > > >From 317d6e4c12b46bde61248ea4ab5e19f68cbd1c57 Mon Sep 17 00:00:00 2001
> > > > From: Jisheng Zhang <jszhang@xxxxxxxxxx>
> > > > Date: Wed, 28 Jun 2023 00:20:18 +0800
> > > > Subject: usb: dwc3: don't reset device side if dwc3 was configured as
> > > > host-only
> > > >
> > > > commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7 upstream.
> > > >
> > > > Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
> > > > system_suspend in host mode") replaces check for HOST only dr_mode with
> > > > current_dr_role. But during booting, the current_dr_role isn't
> > > > initialized, thus the device side reset is always issued even if dwc3
> > > > was configured as host-only. What's more, on some platforms with host
> > > > only dwc3, aways issuing device side reset by accessing device register
> > > > block can cause kernel panic.
> > > >
> > > > Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
> > > > system_suspend in host mode")
> > > > Cc: stable <stable@xxxxxxxxxx>
> > > > Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
> > > > Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
> > > > Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@xxxxxxxxxx
> > > > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > > > ---
> > > > drivers/usb/dwc3/core.c | 4 ++--
> > > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > > >
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.4.8&id=317d6e4c12b46bde61248ea4ab5e19f68cbd1c57
> > > >
> > >
> > > Thanks for the regression report. I'm adding it to regzbot:
> > >
> > > #regzbot ^introduced: e835c0a4e23c38
> > > #regzbot title: some USB devices unrecognized caused by not resetting dwc3 device if it is host-only
> > >
> >
> > When there's phy reconfiguration, we need follow through a soft reset
> > sequence. It may be done when we pass to xHCI driver through its
> > initialization of USBCMD.HCRST. However, looks like we need to do a
> > soft reset before setting more core parameters in dwc3.
> >
> > Can we try to just reset the phy instead to see if it helps? If not, we
> > may have to teach dwc3 about xHCI's USBCMD.HCRST.
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 9c6bf054f15d..66186ef34c6d 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -1104,9 +1104,42 @@ static int dwc3_core_init(struct dwc3 *dwc)
> > if (ret)
> > goto err_exit_ulpi;
> >
> > - ret = dwc3_core_soft_reset(dwc);
> > - if (ret)
> > - goto err_exit_phy;
> > + /*
> > + * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n
> > + * is port index. If this is a multiport host, then we need to reset
> > + * all active ports.
> > + */
> > + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> > + reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
> > + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> > +
> > + /*
> > + * Must meet usb3 phy reset assertion timing,
> > + * should be much less than 20ms.
> > + */
> > + msleep(20);
> > +
> > + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
> > + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> > +
> > + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> > + reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
> > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> > +
> > + /*
> > + * Must meet usb2 phy reset assertion timing,
> > + * should be much less than 20ms.
> > + */
> > + msleep(20);
> > +
> > + reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
> > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> > +
> > + /*
> > + * Some platforms may need more time to synchronize the clocks,
> > + * 100ms should be enough for all.
> > + */
> > + msleep(100);
> >
> > if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
> > !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
> >
> >
> > --
> >
> > Thanks,
> > Thinh
Thank you,
kenta
