From: Richard Yu <richard.yu@xxxxxxx> The GXP hub controller presents a four ports to host software. Each port is logically connected to one control endpoint and four generic endpoints. --- Changes since v1: *Renamed binding. *Removed all unneeded include files. *Using generic node name, usb-hub. *Removed of_match_ptr(). *Using helper for both get resource and IO remap. *Using dev_err_probe() return in probe routine. *Used sizeof(*...) in the code instead of sizeof(struct...). *Removed the term "virtual" as it is still a device. *Removed the downstream port number and generic endpoints number properties from device tree structure. Richard Yu (3): dt-bindings: usb: Add HPE GXP HUB Controller usb: gadget: udc: gxp-udc: add HPE GXP USB HUB support MAINTAINERS: add USB HUB support for GXP .../devicetree/bindings/usb/hpe,gxp-hub.yaml | 53 + MAINTAINERS | 2 + drivers/usb/gadget/udc/Kconfig | 10 + drivers/usb/gadget/udc/Makefile | 1 + drivers/usb/gadget/udc/gxp-udc.c | 1371 +++++++++++++++++ 5 files changed, 1437 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/hpe,gxp-hub.yaml create mode 100644 drivers/usb/gadget/udc/gxp-udc.c -- 2.17.1
