Re: [PATCH v3 1/2] usb: dwc3: core: configure TX/RX threshold for DWC3_IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 12, 2023, Stanley Chang wrote:
> In Synopsys's dwc3 data book:
> To avoid underrun and overrun during the burst, in a high-latency bus
> system (like USB), threshold and burst size control is provided through
> GTXTHRCFG and GRXTHRCFG registers.
> 
> In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
> connected with USB 2.5G Ethernet, there will be overrun problem.
> Therefore, setting TX/RX thresholds can avoid this issue.
> 
> Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx>
> ---
> v2 to v3 change:
>     Move the threshold setting to new function dwc3_config_threshold.
>     Add the threshold setting for usb31 and usb32
> v1 to v2 change:
>     Add the properties for TX/RX threshold setting
> ---
>  drivers/usb/dwc3/core.c | 160 +++++++++++++++++++++++++++++++---------
>  drivers/usb/dwc3/core.h |  13 ++++
>  2 files changed, 137 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 9c6bf054f15d..44ee8526dc28 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1057,6 +1057,111 @@ static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
>  	}
>  }
>  
> +static void dwc3_config_threshold(struct dwc3 *dwc)
> +{
> +	u32 reg;
> +	u8 rx_thr_num;
> +	u8 rx_maxburst;
> +	u8 tx_thr_num;
> +	u8 tx_maxburst;
> +
> +	/*
> +	 * Must config both number of packets and max burst settings to enable
> +	 * RX and/or TX threshold.
> +	 */
> +	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
> +		rx_thr_num = dwc->rx_thr_num_pkt_prd;
> +		rx_maxburst = dwc->rx_max_burst_prd;
> +		tx_thr_num = dwc->tx_thr_num_pkt_prd;
> +		tx_maxburst = dwc->tx_max_burst_prd;
> +
> +		if (rx_thr_num && rx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
> +			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
> +
> +			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
> +			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
> +
> +			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
> +			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
> +		}
> +
> +		if (tx_thr_num && tx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
> +			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
> +
> +			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
> +			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
> +
> +			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
> +			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
> +		}
> +	}
> +
> +	rx_thr_num = dwc->rx_thr_num_pkt;
> +	rx_maxburst = dwc->rx_max_burst;
> +	tx_thr_num = dwc->tx_thr_num_pkt;
> +	tx_maxburst = dwc->tx_max_burst;
> +
> +	if (DWC3_IP_IS(DWC3)) {
> +		if (rx_thr_num && rx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
> +			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
> +			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
> +
> +			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
> +			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
> +		}
> +
> +		if (tx_thr_num && tx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
> +			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
> +			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
> +
> +			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
> +			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
> +		}
> +	} else {
> +		if (rx_thr_num && rx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
> +			reg |= DWC31_GRXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0);
> +			reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num);
> +
> +			reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0);
> +			reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
> +		}
> +
> +		if (tx_thr_num && tx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
> +			reg |= DWC31_GTXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0);
> +			reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num);
> +
> +			reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0);
> +			reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
> +		}
> +	}
> +}
> +
>  /**
>   * dwc3_core_init - Low-level initialization of DWC3 Core
>   * @dwc: Pointer to our controller context structure
> @@ -1209,42 +1314,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
>  	}
>  
> -	/*
> -	 * Must config both number of packets and max burst settings to enable
> -	 * RX and/or TX threshold.
> -	 */
> -	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
> -		u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
> -		u8 rx_maxburst = dwc->rx_max_burst_prd;
> -		u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
> -		u8 tx_maxburst = dwc->tx_max_burst_prd;
> -
> -		if (rx_thr_num && rx_maxburst) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
> -			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
> -
> -			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
> -			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
> -
> -			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
> -			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
> -
> -			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
> -		}
> -
> -		if (tx_thr_num && tx_maxburst) {
> -			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
> -			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
> -
> -			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
> -			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
> -
> -			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
> -			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
> -
> -			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
> -		}
> -	}
> +	dwc3_config_threshold(dwc);
>  
>  	return 0;
>  
> @@ -1380,6 +1450,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  	u8			lpm_nyet_threshold;
>  	u8			tx_de_emphasis;
>  	u8			hird_threshold;
> +	u8			rx_thr_num_pkt = 0;
> +	u8			rx_max_burst = 0;
> +	u8			tx_thr_num_pkt = 0;
> +	u8			tx_max_burst = 0;
>  	u8			rx_thr_num_pkt_prd = 0;
>  	u8			rx_max_burst_prd = 0;
>  	u8			tx_thr_num_pkt_prd = 0;
> @@ -1442,6 +1516,14 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  				"snps,usb2-lpm-disable");
>  	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
>  				"snps,usb2-gadget-lpm-disable");
> +	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
> +				&rx_thr_num_pkt);
> +	device_property_read_u8(dev, "snps,rx-max-burst",
> +				&rx_max_burst);
> +	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
> +				&tx_thr_num_pkt);
> +	device_property_read_u8(dev, "snps,tx-max-burst",
> +				&tx_max_burst);
>  	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
>  				&rx_thr_num_pkt_prd);
>  	device_property_read_u8(dev, "snps,rx-max-burst-prd",
> @@ -1523,6 +1605,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  
>  	dwc->hird_threshold = hird_threshold;
>  
> +	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
> +	dwc->rx_max_burst = rx_max_burst;
> +
> +	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
> +	dwc->tx_max_burst = tx_max_burst;
> +
>  	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
>  	dwc->rx_max_burst_prd = rx_max_burst_prd;
>  
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index a69ac67d89fe..6782ec8bfd64 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -211,6 +211,11 @@
>  #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
>  #define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
>  
> +/* Global TX Threshold Configuration Register */
> +#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
> +#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
> +#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
> +
>  /* Global RX Threshold Configuration Register for DWC_usb31 only */
>  #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
>  #define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
> @@ -1045,6 +1050,10 @@ struct dwc3_scratchpad_array {
>   * @test_mode_nr: test feature selector
>   * @lpm_nyet_threshold: LPM NYET response threshold
>   * @hird_threshold: HIRD threshold
> + * @rx_thr_num_pkt: USB receive packet count
> + * @rx_max_burst: max USB receive burst size
> + * @tx_thr_num_pkt: USB transmit packet count
> + * @tx_max_burst: max USB transmit burst size
>   * @rx_thr_num_pkt_prd: periodic ESS receive packet count
>   * @rx_max_burst_prd: max periodic ESS receive burst size
>   * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
> @@ -1273,6 +1282,10 @@ struct dwc3 {
>  	u8			test_mode_nr;
>  	u8			lpm_nyet_threshold;
>  	u8			hird_threshold;
> +	u8			rx_thr_num_pkt;
> +	u8			rx_max_burst;
> +	u8			tx_thr_num_pkt;
> +	u8			tx_max_burst;
>  	u8			rx_thr_num_pkt_prd;
>  	u8			rx_max_burst_prd;
>  	u8			tx_thr_num_pkt_prd;
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux