Hi, On 9/4/23 07:44, Wentong Wu wrote: > Add driver for Intel La Jolla Cove Adapter (LJCA) device. This > IO-expander expands additional functions to the host system > such as GPIO, I2C and SPI with USB host interface. We add 4 > drivers to support this device: a USB driver, a GPIO chip driver, > a I2C controller driver and a SPI controller driver. > > --- > v14: > - fix build error: implicit declaration of function 'acpi_dev_clear_dependencies' > > v13: > - make ljca-usb more robust with the help of Hans de Goede > - call acpi_dev_clear_dependencies() to mark _DEP ACPI dependencies on the I2C controller as satisfied, and patch is from Hans de Goede Thank you I can confirm that v14 works well on my ThinkPad x1 yoga gen 8: Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx> Note I still have one small remark for patch 1/4, I'll reply to the patch itself with the remark. Regards, Hans > > v12: > - switch dev_err to dev_dbg for i2c-ljca driver > - avoid err printing because of calling usb_kill_urb when attempts to resubmit the rx urb > > v11: > - switch dev_err to dev_dbg for i2c-ljca driver > - remove message length check because of defined quirk structure > - remove I2C_FUNC_SMBUS_EMUL support > > v10: > - remove ljca_i2c_format_slave_addr > - remove memset before write write w_packet > - make ljca_i2c_stop void and print err message in case failure > - use dev_err_probe in ljca_i2c_probe function > > v9: > - overhaul usb-ljca driver to make it more structured and easy understand > - fix memory leak issue for usb-ljca driver > - add spinlock to protect tx_buf and ex_buf > - change exported APIs for usb-ljca driver > - unify prefix for structures and functions for i2c-ljca driver > - unify prefix for structures and functions for spi-ljca driver > - unify prefix for structures and functions for gpio-ljca driver > - update gpio-ljca, i2c-ljca and spi-ljca drivers according to usb-ljca's changes > > Wentong Wu (4): > usb: Add support for Intel LJCA device > i2c: Add support for Intel LJCA USB I2C driver > spi: Add support for Intel LJCA USB SPI driver > gpio: update Intel LJCA USB GPIO driver > > drivers/gpio/Kconfig | 4 +- > drivers/gpio/gpio-ljca.c | 246 +++++++------ > drivers/i2c/busses/Kconfig | 11 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-ljca.c | 334 +++++++++++++++++ > drivers/spi/Kconfig | 11 + > drivers/spi/Makefile | 1 + > drivers/spi/spi-ljca.c | 297 +++++++++++++++ > drivers/usb/misc/Kconfig | 14 + > drivers/usb/misc/Makefile | 1 + > drivers/usb/misc/usb-ljca.c | 834 ++++++++++++++++++++++++++++++++++++++++++ > include/linux/usb/ljca.h | 113 ++++++ > 12 files changed, 1762 insertions(+), 105 deletions(-) > create mode 100644 drivers/i2c/busses/i2c-ljca.c > create mode 100644 drivers/spi/spi-ljca.c > create mode 100644 drivers/usb/misc/usb-ljca.c > create mode 100644 include/linux/usb/ljca.h >
