On 05/09/2023 13:30, Rohit Agarwal wrote:
Add support for USB3 QMP PHY found in SDX75 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 158 ++++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 0130bb8..57b8b5b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -23,6 +23,7 @@
#include "phy-qcom-qmp-pcs-misc-v3.h"
#include "phy-qcom-qmp-pcs-usb-v4.h"
#include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v6.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
@@ -858,6 +859,134 @@ static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
[skipped the tables]
@@ -1556,6 +1685,32 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
.has_pwrdn_delay = true,
};
+static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
+ .lanes = 1,
+ .offsets = &qmp_usb_offsets_v5,
v6?
+
+ .serdes_tbl = sdx75_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx75_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx75_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sdx75_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sdx75_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
Clocks and resets are gone in
https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@xxxxxxxxxx/
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v5_usb3phy_regs_layout,
This must be v6, if the rest of the PHY is using v6 register names.
+ .pcs_usb_offset = 0x1000,
+
+ .has_pwrdn_delay = true,
+};
+
static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.lanes = 1,
@@ -2256,6 +2411,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
.compatible = "qcom,sdx65-qmp-usb3-uni-phy",
.data = &sdx65_usb3_uniphy_cfg,
}, {
+ .compatible = "qcom,sdx75-qmp-usb3-uni-phy",
+ .data = &sdx75_usb3_uniphy_cfg,
+ }, {
.compatible = "qcom,sm6115-qmp-usb3-phy",
.data = &qcm2290_usb3phy_cfg,
}, {
--
With best wishes
Dmitry
