Linux SPI

• Thread Index

• [PATCH v9 03/14] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 04/14] dmaengine: imx-sdma: remove duplicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 01/14] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 03/10] b43: Remove uninitialized_var() usage
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 04/10] rtlwifi: rtl8192cu: Remove uninitialized_var() usage
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: (EXT) RE: [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: tegra114: missing put on pm_runtime_get_sync failure
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• Re: [PATCH] spi: tegra20-sflash: call pm_runtime_put in case of pm_runtime_get failure
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] spi: tegra114: missing put on pm_runtime_get_sync failure
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] spi: tegra20-slink: add missing pm_runtime_put
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: masonccyang@xxxxxxxxxxx
• RE: [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 05/10] ide: Remove uninitialized_var() usage
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH 05/10] ide: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 03/10] b43: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 05/10] ide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 03/10] b43: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 04/10] rtlwifi: rtl8192cu: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 03/10] b43: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 02/10] drbd: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 07/10] spi: davinci: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 05/10] ide: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 00/10] Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 00/10] Remove uninitialized_var() macro
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH 06/10] clk: st: Remove uninitialized_var() usage
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: spi: Document bcm2711 and bcm7211 SPI compatible
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: spi: Document bcm2711 and bcm7211 SPI compatible
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 0/3] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 00/10] Remove uninitialized_var() macro
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V2 1/3] dt-bindings: spi: Convert mxs spi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 2/3] dt-bindings: spi: Convert imx cspi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 3/3] dt-bindings: spi: Convert imx lpspi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V2 0/3] Convert mxs/imx spi/cspi/lpspi binding to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• Re: [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 00/10] Remove uninitialized_var() macro
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH 00/10] Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 00/10] Remove uninitialized_var() macro
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH 10/10] compiler: Remove uninitialized_var() macro
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 10/10] compiler: Remove uninitialized_var() macro
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 00/10] Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 04/10] rtlwifi: rtl8192cu: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 01/10] x86/mm/numa: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 02/10] drbd: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 05/10] ide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 03/10] b43: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 09/10] treewide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 07/10] spi: davinci: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 10/10] compiler: Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 08/10] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH 06/10] clk: st: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 22/28] dt-bindings: i2c: Convert i2c-pxa to json-schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• RE: (EXT) [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: (EXT) [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: spi: Convert mxs spi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 3/3] dt-bindings: spi: Convert imx lpspi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 2/3] dt-bindings: spi: Convert imx cspi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH 0/3] Convert mxs/imx spi/cspi/lpspi binding to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• Re: [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/10] spi: spi-dw-mchp: Add Sparx5 support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] dt-bindings: spi: spi-dw-mchp: Add Sparx5 support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/10] spi: spi-dw-mmio: Spin off MSCC platforms into spi-dw-mchp
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 04/10] dt-bindings: spi: Add bindings for spi-dw-mchp
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] spi: dw: Add support for RX sample delay register
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• Re: [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Linux as a SPI slave?
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: sprd: call pm_runtime_put if pm_runtime_get_sync fails
  • From: Baolin Wang <baolin.wang7@xxxxxxxxx>
• Re: [PATCH] spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: img-spfi: Add missing pm_runtime_put() call in img_spfi_resume()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] spi: sprd: call pm_runtime_put if pm_runtime_get_sync fails
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH] spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• Re: [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v4 1/7] mtd: spi-nor: sfdp: get octal mode maximum speed from BFPT
  • From: masonccyang@xxxxxxxxxxx
• [PATCH] spi: img-spfi: add missing pm_runtime_pu
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: tegra20-slink: add missing pm_runtime_put
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: tegra20-slink: add missing pm_runtime_put if pm_runtime_get_sync fails
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: tegra20-slink: call pm_runtime_put if pm_runtime_get_sync fails
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: sprd: call pm_runtime_put if pm_runtime_get_sync fails
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: tegra114: missing put on pm_runtime_get_sync failure
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: tegra20-sflash: call pm_runtime_put in case of pm_runtime_get failure
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: spi-ti-qspi: call pm_runtime_put on pm_runtime_get failure
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• Re: [GIT PULL] SPI updates for v5.8
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi:fsl-espi: Ignore spurious interrupts
  • From: minyard@xxxxxxx
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [GIT PULL] SPI updates for v5.8
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 13/19] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v3 8/8] spi: Move cadence-quadspi driver to drivers/spi/
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 7/8] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 8/8] spi: Move cadence-quadspi driver to drivers/spi/
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 3/8] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 6/8] mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 4/8] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 1/8] mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 2/8] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v3 8/8] spi: Move cadence-quadspi driver to drivers/spi/
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 6/8] mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 7/8] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 8/8] spi: Move cadence-quadspi driver to drivers/spi/
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 4/8] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 2/8] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 3/8] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 1/8] mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v2 5/6] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v9 07/19] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v9 06/19] mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v9 13/19] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] spi: Move cadence-quadspi driver to drivers/spi/
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-fsl-dspi: fix native data copy
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-fsl-dspi: fix native data copy
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-fsl-dspi: fix native data copy
  • From: Angelo Dureghello <angelo.dureghello@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [PATCH v2 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v7] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Implement shutdown callback
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Implement shutdown callback
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Implement shutdown callback
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Implement shutdown callback
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCHv3 1/2] spi: dw: add reset control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Implement shutdown callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCHv4 1/2] spi: dw: add reset control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH 00/10] spi: Adding support for Microchip Sparx5 SoC
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/9] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCHv4 2/2] dt-bindings: snps,dw-apb-ssi: add optional reset property
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv4 1/2] spi: dw: add reset control
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Tsuchiya Yuto <kitakar@xxxxxxxxx>
• Re: [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v6 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 02/16] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 08/16] spi: dw: Fix Rx-only DMA transfers
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 05/16] spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 07/16] spi: dw: Use DMA max burst to set the request thresholds
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 03/16] spi: dw: Locally wait for the DMA transfers completion
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 09/16] spi: dw: Add core suffix to the DW APB SSI core source file
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 11/16] spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 14/16] spi: dw: Add DMA support to the DW SPI MMIO driver
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 10/16] spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 13/16] spi: dw: Cleanup generic DW DMA code namings
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 15/16] spi: dw: Use regset32 DebugFS method to create regdump file
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 01/16] spi: dw: Set xfer effective_speed_hz
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 04/16] spi: dw: Add SPI Tx-done wait method to DMA-based transfer
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/2] spi: dw: add optional reset property
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 05/16] spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/16] spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/16] spi: dw: Locally wait for the DMA transactions completion
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/16] spi: dw: Set xfer effective_speed_hz
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/16] spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/16] spi: dw: Locally wait for the DMA transactions completion
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/7] mtd: spi-nor: sfdp: get octal mode maximum speed from BFPT
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/16] spi: dw: Set xfer effective_speed_hz
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/16] spi: dw: Locally wait for the DMA transactions completion
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 03/16] spi: dw: Locally wait for the DMA transactions completion
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 7/7] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 6/7] spi: mxic: patch for octal DTR mode support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 4/7] mtd: spi-nor: core: add configuration register 2 read & write support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 3/7] mtd: spi-nor: sfdp: parse command sequences to change octal DTR mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 2/7] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 1/7] mtd: spi-nor: sfdp: get octal mode maximum speed from BFPT
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 0/7] mtd: spi-nor: add xSPI Octal DTR support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v4 5/7] mtd: spi-nor: core: execute command sequences to change octal DTR mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH v3 00/14] mtd: spi-nor: add xSPI Octal DTR support
  • From: masonccyang@xxxxxxxxxxx
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 08/16] spi: dw: Fix Rx-only DMA transfers
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 04/16] spi: dw: Add SPI Tx-done wait method to DMA-based transfer
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 03/16] spi: dw: Locally wait for the DMA transactions completion
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 02/16] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 05/16] spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 10/16] spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 13/16] spi: dw: Cleanup generic DW DMA code namings
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 15/16] spi: dw: Use regset32 DebugFS method to create regdump file
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 07/16] spi: dw: Use DMA max burst to set the request thresholds
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 11/16] spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 09/16] spi: dw: Add core suffix to the DW APB SSI core source file
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 14/16] spi: dw: Add DMA support to the DW SPI MMIO driver
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 01/16] spi: dw: Set xfer effective_speed_hz
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 12/14] spi: mxic: patch for octal DTR mode support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 5/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] spi: bcm2835: Implement shutdown callback
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] spi: bcm2835: Enable shared interrupt support
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v2 4/6] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [RFC PATCH] spi: spi-cavium-thunderx: flag controller as half duplex
  • From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
• Re: [PATCH] [v2] spi: tegra114: Fix runtime PM imbalance on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] [v2] spi: tegra20-sflash: Fix runtime PM imbalance on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] [v2] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/6] mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH v1 2/2] spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] spi: dw: Make DMA request line assignments explicit for Intel Medfield
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] spi: Move cadence-quadspi driver to drivers/spi/
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 00/14] mtd: spi-nor: add xSPI Octal DTR support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [PATCH v3 13/14] mtd: spi-nor: core: execute command sequences to change octal DTR mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 14/14] mtd: spi-nor: macronix: Add Octal 8D-8D-8D supports for Macronix mx25uw51245g
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 11/14] mtd: spi-nor: core: enable octal DTR mode when possible
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 12/14] spi: mxic: patch for octal DTR mode support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 10/14] mtd: spi-nor: core: use dummy cycle and address width info from SFDP
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 09/14] mtd: spi-nor: core: add configuration register 2 read & write support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 02/14] spi: spi-mem: allow specifying a command's extension
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 00/14] mtd: spi-nor: add xSPI Octal DTR support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 08/14] mtd: spi-nor: sfdp: parse command sequences to change octal DTR mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 07/14] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 06/14] mtd: spi-nor: sfdp: get octal mode maximum speed from BFPT
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 05/14] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 03/14] mtd: spi-nor: add support for DTR protocol
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 04/14] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 01/14] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Tsuchiya Yuto <kitakar@xxxxxxxxx>
• Re: [PATCH v2 6/6] spi: Move cadence-quadspi driver to drivers/spi/
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCHv3 2/2] dt-bindings: snps,dw-apb-ssi: add optional reset property
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv3 1/2] spi: dw: add reset control
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Tsuchiya Yuto <kitakar@xxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Tsuchiya Yuto <kitakar@xxxxxxxxx>
• Re: [PATCH v6 8/9] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 8/9] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [PATCH V7 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 8/9] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [PATCH V7 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/9] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v6 5/9] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v6 9/9] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 8/9] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 7/9] drm/panel: Add ilitek ili9341 panel driver
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 6/9] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 5/9] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 4/9] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 3/9] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 2/9] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 1/9] ARM: dts: stm32: Add dma config for spi5
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v6 0/9] Enable ili9341 and l3gd20 on stm32f429-disco
  • From: dillon.minfei@xxxxxxxxx
• Re: [PATCH v8 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH V7 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] spi: Remove note about transfer limit for spi_write_then_read()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-fsl-lpspi: Fix runtime PM imbalance on error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] Intel SPI unbind fixes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCHv2 1/2] spi: dw: add reset control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCHv2 2/2] dt-bindings: snps,dw-apb-ssi: add optional reset property
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv2 1/2] spi: dw: add reset control
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V7 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH V6 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH v5 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 6/6] spi: Move cadence-quadspi driver to drivers/spi/
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v2 2/6] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v2 1/6] mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v2 5/6] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v2 4/6] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v2 3/6] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v2 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 1/6] mtd: spi-nor: cadence-quadspi: Drop cdns,is-decoded-cs property
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 3/3] spi: pxa2xx: Fix runtime PM ref imbalance on probe error
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH] spi: mux: repair mux usage
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: mux: repair mux usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Make spi_delay_exec() warn if called from atomic context
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: Remove note about transfer limit for spi_write_then_read()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] Intel SPI unbind fixes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] spi: dw: Fix controller unregister order
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] spi: pxa2xx: Fix runtime PM ref imbalance on probe error
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/3] spi: pxa2xx: Fix runtime PM ref imbalance on probe error
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 2/3] spi: pxa2xx: Fix controller unregister order
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 1/3] spi: dw: Fix controller unregister order
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 0/3] Intel SPI unbind fixes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] spi: mux: repair mux usage
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v9 05/19] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 19/19] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 10/19] mtd: spi-nor: core: use dummy cycle and address width info from SFDP
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 18/19] mtd: spi-nor: spansion: add support for Cypress Semper flash
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 09/19] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 17/19] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 16/19] mtd: spi-nor: core: disable Octal DTR mode on suspend.
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 15/19] mtd: spi-nor: core: perform a Soft Reset on shutdown
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 14/19] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 13/19] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 12/19] mtd: spi-nor: core: enable octal DTR mode when possible
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 11/19] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 08/19] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 07/19] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 03/19] spi: atmel-quadspi: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 02/19] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 04/19] spi: spi-mtk-nor: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 06/19] mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 00/19] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v9 01/19] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused()
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
  • From: dillon.minfei@xxxxxxxxx
• [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
  • From: dillon.minfei@xxxxxxxxx
• Re: [PATCH v8 02/19] spi: spi-mem: allow specifying a command's extension
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH V6 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] spi: spi-fsl-lpspi: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH] [v2] spi: tegra114: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] [v2] spi: tegra20-sflash: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH] [v2] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: Re: Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: dinghao.liu@xxxxxxxxxx
• Re: Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: dinghao.liu@xxxxxxxxxx
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH V6 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v8 19/19] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 18/19] mtd: spi-nor: spansion: add support for Cypress Semper flash
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 17/19] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 16/19] mtd: spi-nor: core: disable Octal DTR mode on suspend.
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 15/19] mtd: spi-nor: core: perform a Soft Reset on shutdown
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 14/19] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 13/19] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 12/19] mtd: spi-nor: core: enable octal DTR mode when possible
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 11/19] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 10/19] mtd: spi-nor: core: use dummy cycle and address width info from SFDP
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 09/19] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 08/19] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 07/19] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 06/19] mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 05/19] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 02/19] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 03/19] spi: atmel-quadspi: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 04/19] spi: spi-mtk-nor: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 00/19] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v8 01/19] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v7 02/20] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <me@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] spi: rb4xx: null pointer bug fix
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 04/19] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Make spi_delay_exec() warn if called from atomic context
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Make spi_delay_exec() warn if called from atomic context
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: Make spi_delay_exec() warn if called from atomic context
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: Make spi_delay_exec() warn if called from atomic context
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• [PATCH] spi: Make spi_delay_exec() warn if called from atomic context
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 02/20] spi: spi-mem: allow specifying a command's extension
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Feng Tang <feng.tang@xxxxxxxxx>
• Re: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/16] spi: dw: Add generic DW DMA controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/16] spi: dw: Add generic DW DMA controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/19] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v7 03/20] spi: atmel-quadspi: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 01/20] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 05/20] spi: mxic: Avoid endianness problems with 2-byte opcodes
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 20/20] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 19/20] mtd: spi-nor: spansion: add support for Cypress Semper flash
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 13/20] mtd: spi-nor: core: enable octal DTR mode when possible
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 12/20] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 06/20] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 17/20] mtd: spi-nor: core: disable Octal DTR mode on suspend.
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 18/20] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 16/20] mtd: spi-nor: core: perform a Soft Reset on shutdown
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 14/20] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 15/20] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 07/20] mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 11/20] mtd: spi-nor: core: use dummy cycle and address width info from SFDP
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 10/20] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 09/20] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 08/20] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 00/20] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 04/20] spi: spi-mtk-nor: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v7 02/20] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v5 05/19] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Feng Tang <feng.tang@xxxxxxxxx>
• Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: dinghao.liu@xxxxxxxxxx
• Re: [PATCH v5 05/19] mtd: spi-nor: add support for DTR protocol
  • From: masonccyang@xxxxxxxxxxx
• [PATCH v4 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 14/16] spi: dw: Add DMA support to the DW SPI MMIO driver
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 11/16] spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 07/16] spi: dw: Use DMA max burst to set the request thresholds
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 04/16] spi: dw: Discard unused void priv pointer
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 02/16] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: Add Baikal-T1 System Boot SPI Controller binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
• Re: [PATCH v6 04/19] spi: spi-mem: allow specifying a command's extension
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v6 04/19] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v6 04/19] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH 3/3] spi: rb4xx: add corresponding device tree documentation
  • From: Christopher Hill <ch6574@xxxxxxxxx>
• [PATCH 2/3] spi: rb4xx: update driver to be device tree aware
  • From: Christopher Hill <ch6574@xxxxxxxxx>
• [PATCH 1/3] spi: rb4xx: null pointer bug fix
  • From: Christopher Hill <ch6574@xxxxxxxxx>
• Re: [PATCH v6 04/19] spi: spi-mem: allow specifying a command's extension
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v6 00/19] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v3 00/16] spi: dw: Add generic DW DMA controller support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: dw: add reset control
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: snps,dw-apb-ssi: add optional reset property
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dw: add reset control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: snps,dw-apb-ssi: add optional reset property
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCH 1/2] spi: dw: add reset control
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 00/19] mtd: spi-nor: add xSPI Octal DTR support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V6 1/7] soc: qcom: geni: Support for ICC voting
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: Add Baikal-T1 System Boot SPI Controller binding
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: Add Baikal-T1 System Boot SPI Controller binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Feng Tang <feng.tang@xxxxxxxxx>
• Re: [PATCH v5 05/19] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 2/3] mtd: spi-nor: Add prepare/unprepare support for spimem device
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• [RFC PATCH 1/3] spi: spi-mem: add optional prepare/unprepare methods in spi_controller_mem_ops
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• [RFC PATCH 3/3] spi: hisi-sfc-v3xx: Add prepare/unprepare methods to avoid race condition
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• [RFC PATCH 0/3] Add prepare/unprepare method in spi_controller_mem_ops
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 07/16] spi: dw: Use DMA max burst to set the request thresholds
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 09/16] spi: dw: Add core suffix to the DW APB SSI core source file
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 05/19] mtd: spi-nor: add support for DTR protocol
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v5 09/19] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH V6 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V6 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V6 0/7] [PATCH V5 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/19] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: masonccyang@xxxxxxxxxxx
• Re: Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: dinghao.liu@xxxxxxxxxx
• Re: [PATCH v5 09/19] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] spi: tegra114: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] spi: tegra20-sflash: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] spi: tegra20-slink: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] spi: spi-ti-qspi: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Feng Tang <feng.tang@xxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v3 16/16] dt-bindings: spi: Convert DW SPI binding to DT schema
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 14/16] spi: dw: Add DMA support to the DW SPI MMIO driver
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 12/16] spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 11/16] spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 07/16] spi: dw: Use DMA max burst to set the request thresholds
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 03/16] spi: dw: Discard static DW DMA slave structures
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 02/16] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 01/16] spi: dw: Add Tx/Rx finish wait methods to the MID DMA
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 00/16] spi: dw: Add generic DW DMA controller support
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Raspberry Pi SPI unbind fixes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v6 19/19] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 18/19] mtd: spi-nor: spansion: add support for Cypress Semper flash
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 17/19] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 15/19] mtd: spi-nor: core: perform a Soft Reset on shutdown
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 16/19] mtd: spi-nor: core: disable Octal DTR mode on suspend.
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 12/19] mtd: spi-nor: core: enable octal DTR mode when possible
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 14/19] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 13/19] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 11/19] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 09/19] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 10/19] mtd: spi-nor: core: use dummy cycle and address width info from SFDP
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 08/19] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 03/19] spi: spi-mtk-nor: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 07/19] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 05/19] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 06/19] mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 04/19] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v6 00/19] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <p.yadav@xxxxxx>