If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler dspi_interrupt() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): $ echo 4002d000.spi > /sys/devices/platform/soc/40000000.bus/4002d000.spi/driver/unbind Unhandled fault: external abort on non-linefetch (0x1008) at 0x8887f02c Internal error: : 1008 [#1] ARM CPU: 0 PID: 136 Comm: sh Not tainted 5.7.0-next-20200610-00009-g5c913fa0f9c5-dirty #74 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (regmap_mmio_read32le) from [<8061885c>] (regmap_mmio_read+0x48/0x68) (regmap_mmio_read) from [<8060e3b8>] (_regmap_bus_reg_read+0x24/0x28) (_regmap_bus_reg_read) from [<80611c50>] (_regmap_read+0x70/0x1c0) (_regmap_read) from [<80611dec>] (regmap_read+0x4c/0x6c) (regmap_read) from [<80678ca0>] (dspi_interrupt+0x3c/0xa8) (dspi_interrupt) from [<8017acec>] (free_irq+0x26c/0x3cc) (free_irq) from [<8017dcec>] (devm_irq_release+0x1c/0x20) (devm_irq_release) from [<805f98ec>] (release_nodes+0x1e4/0x298) (release_nodes) from [<805f9ac8>] (devres_release_all+0x40/0x60) (devres_release_all) from [<805f5134>] (device_release_driver_internal+0x108/0x1ac) (device_release_driver_internal) from [<805f521c>] (device_driver_detach+0x20/0x24) Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform") Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- This is an follow up of my other patch for I2C IMX driver [1]. Let's fix the issues consistently. [1] https://lore.kernel.org/lkml/1592130544-19759-2-git-send-email-krzk@xxxxxxxxxx/T/#u Changes since v1: 1. Disable the IRQ instead of using non-devm interface. --- drivers/spi/spi-fsl-dspi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 58190c94561f..023e05c53b85 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1400,7 +1400,7 @@ static int dspi_probe(struct platform_device *pdev) ret = dspi_request_dma(dspi, res->start); if (ret < 0) { dev_err(&pdev->dev, "can't get dma channels\n"); - goto out_clk_put; + goto disable_irq; } } @@ -1415,11 +1415,14 @@ static int dspi_probe(struct platform_device *pdev) ret = spi_register_controller(ctlr); if (ret != 0) { dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); - goto out_clk_put; + goto disable_irq; } return ret; +disable_irq: + if (dspi->irq > 0) + disable_irq(dspi->irq); out_clk_put: clk_disable_unprepare(dspi->clk); out_ctlr_put: @@ -1435,6 +1438,8 @@ static int dspi_remove(struct platform_device *pdev) /* Disconnect from the SPI framework */ dspi_release_dma(dspi); + if (dspi->irq > 0) + disable_irq(dspi->irq); clk_disable_unprepare(dspi->clk); spi_unregister_controller(dspi->ctlr); -- 2.7.4