[PATCH 2/5] spi: bcm-qspi: Improve debug reading SPI data

[Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>]

This patch prevents device debug when data is not read from hardware
(i.e. when there is no receive buffer).

Reviewed-by: Callum Sinclair <callum.sinclair@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
---
 drivers/spi/spi-bcm-qspi.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 8fc5b9b3757b..92e04d24359f 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -749,21 +749,22 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 	tp = qspi->trans_pos;
 
 	for (slot = 0; slot < slots; slot++) {
-		if (tp.trans->bits_per_word <= 8) {
-			u8 *buf = tp.trans->rx_buf;
-
-			if (buf)
-				buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
-			dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-				buf ? buf[tp.byte] : 0x0);
-		} else {
-			u16 *buf = tp.trans->rx_buf;
-
-			if (buf)
-				buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
-								      slot);
-			dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-				buf ? buf[tp.byte / 2] : 0x0);
+		if (tp.trans->rx_buf) {
+			if (tp.trans->bits_per_word <= 8) {
+				u8 *buf = tp.trans->rx_buf;
+
+				buf[tp.byte] =
+					read_rxram_slot_u8(qspi, slot);
+				dev_dbg(&qspi->pdev->dev, "RD %02x\n",
+					buf[tp.byte]);
+			} else {
+				u16 *buf = tp.trans->rx_buf;
+
+				buf[tp.byte / 2] =
+					read_rxram_slot_u16(qspi, slot);
+				dev_dbg(&qspi->pdev->dev, "RD %04x\n",
+					buf[tp.byte / 2]);
+			}
 		}
 
 		update_qspi_trans_byte_count(qspi, &tp,
-- 
2.27.0