+ YC Lin in loop, YC(ycllin@xxxxxxxxxxx)will take over this patch set. > Subject > > [PATCH v4 0/7] mtd: spi-nor: add xSPI Octal DTR support > > Hello, > > JESD216C has defined specification for Octal 8S-8S-8S and 8D-8D-8D. > Based on JEDEC216C Basic Flash Parameter Table (BFPT) driver extract > DWORD-18: command and command extension type. > DWORD-20: Maximum operation speed of device in Octal mode. > > xSPI profile 1.0 table: > DWORD-1: Read Fast command, the number of dummy cycles and address nbytes > for Read Status Register command. > DWORD-2: Read/Write volatile Register command for CFG Reg2. > DWORD-4 and DWORD-5: dummy cycles used for various frequencies based on > maximum speed of device from BFPT 20th DWORD. > > Ccommand sequences to change to octal DTR mode: > The length of each command sequence is 8 per byte for single SPI mode and > patching driver to parse and execute these sequences for octal DTR mode. > > By Vignesh's comments, this patches set is dependency on Pratyush's > [1][2][5][7][8] and [10][12]. > > Tested on Macronix's Zynq PicoZed board with Macronix's SPI controller > (spi-mxic.c) driver patched on mx25uw51245g Octal flash. > CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================