[PATCH v4 2/4] spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

During shutdown, the driver should unregister the SPI controller
and stop the hardware.  Otherwise the dspi_transfer_one_message() could
wait on completion infinitely.

Additionally, calling spi_unregister_controller() first in device
shutdown reverse-matches the probe function, where SPI controller is
registered at the end.

Fixes: dc234825997e ("spi: spi-fsl-dspi: Adding shutdown hook")
Cc: <stable@xxxxxxxxxxxxxxx>
Reported-by: Vladimir Oltean <olteanv@xxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

kexec() not tested, only system shutdown.

Changes since v3:
1. New patch.
---
 drivers/spi/spi-fsl-dspi.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index ec0fd0d366eb..ec7919d9c0d9 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1452,20 +1452,7 @@ static int dspi_remove(struct platform_device *pdev)
 
 static void dspi_shutdown(struct platform_device *pdev)
 {
-	struct spi_controller *ctlr = platform_get_drvdata(pdev);
-	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
-
-	/* Disable RX and TX */
-	regmap_update_bits(dspi->regmap, SPI_MCR,
-			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
-			   SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
-
-	/* Stop Running */
-	regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
-
-	dspi_release_dma(dspi);
-	clk_disable_unprepare(dspi->clk);
-	spi_unregister_controller(dspi->ctlr);
+	dspi_remove(pdev);
 }
 
 static struct platform_driver fsl_dspi_driver = {
-- 
2.17.1