Linux SPI

• Thread Index

• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 10/10] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 09/10] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 08/10] spi: spi-sun6i: sun6i_spi_fill_fifo(): remove not needed length argument
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 06/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 05/10] spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 04/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 03/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 02/10] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 01/10] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• 回复: [kthread] a90477f0c9: WARNING:at_kernel/kthread.c:#kthread_queue_work
  • From: "Zhang, Qiang" <Qiang.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH 0/9] spi: spi-sun6i: One fix and some improvements
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: [PATCH 5/9] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it
  • From: Maxime Ripard <maxime@xxxxxxxxxx>
• Re: WARNING: at kernel/kthread.c:819 kthread_queue_work - spi_start_queue
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• WARNING: at kernel/kthread.c:819 kthread_queue_work - spi_start_queue
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 2/2] dt-bindings: Add documentation for SPI daisy chain driver.
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• [PATCH v2 1/2] spi: Add the SPI daisy chain support.
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• [PATCH 9/9] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 8/9] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 7/9] spi: spi-sun6i: sun6i_spi_fill_fifo(): remove not needed length argument
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/9] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/9] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/9] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/9] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/9] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/9] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/9] spi: spi-sun6i: One fix and some improvements
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: Add the SPI daisy chain support.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] spi: Add the SPI daisy chain support.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Change Maintainer for some at91 drivers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: Add documentation for SPI daisy chain driver.
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• [PATCH 1/2] spi: Add the SPI daisy chain support.
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: sc7180: Add qspi opps and power-domains
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: sdm845: Add qspi opps and power-domains
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH 1/3] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH 0/3] QSPI: Add DVFS support
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
• Re: [PATCH v2 08/16] spi: davinci: Remove uninitialized_var() usage
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Change Maintainer for some at91 drivers
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
• Re: [PATCH v2 08/16] spi: davinci: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 08/16] spi: davinci: Remove uninitialized_var() usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 08/16] spi: davinci: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Change Maintainer for some at91 drivers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spidev: Add compatible for external SPI ports on Kontron boards
  • From: Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Change Maintainer for some at91 drivers
  • From: <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 5/8] dt-bindings: snps,dw-apb-ssi: Add sparx5 support, plus snps,rx-sample-delay-ns property
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 2/8] arm64: dts: sparx5: Add SPI controller and SPI mux
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 6/8] dt-bindings: microchip,sparx5-spi-mux: Add Sparx5 SPI mux driver bindings
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: sparx5: Add spi-nand devices
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: sparx5: Add spi-nor support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 3/8] spi: dw: Add Microchip Sparx5 support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 4/8] mux: sparx5: Add Sparx5 SPI mux driver
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 1/8] spi: dw: Add support for RX sample delay register
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v3 0/8] spi: Adding support for Microchip Sparx5 SoC
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] spi: dw: Add Microchip Sparx5 support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.7 20/53] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 21/53] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 15/40] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 09/27] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/17] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/17] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 04/13] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 3/7] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 4/7] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 05/13] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 08/27] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 16/40] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH 1/3] spi: spi-geni-qcom: Avoid clock setting if not needed
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/3] spi: spi-geni-qcom: Avoid a bunch of per-transfer overhead
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 3/3] spi: spi-geni-qcom: Get rid of most overhead in prepare_message()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] spi: spi-geni-qcom: Set an autosuspend delay of 250 ms
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] spi: fsl: add missing __iomem annotation
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: img-spfi: Convert to use GPIO descriptors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Avoid setting the chip select if we don't need to
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: mediatek: use correct SPI_CFG2_REG MACRO
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: bcm2835: Interrupt-handling optimisations
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: lantiq-ssc: Convert to use GPIO descriptors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Add Renesas RPC-IF support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: npcm-pspi: Convert to use GPIO descriptors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 08/16] spi: davinci: Remove uninitialized_var() usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: SPI daisy chain support
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [PATCH] spi: a3700: fix hang caused by a3700_spi_transfer_one_fifo()
  • From: Daisuke Yamane <yamane07ynct@xxxxxxxxx>
• Re: [PATCH] spi: Avoid setting the chip select if we don't need to
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Avoid setting the chip select if we don't need to
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH] spi: a3700: fix hang caused by a3700_spi_transfer_one_fifo()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v10 12/12] dmaengine: imx-sdma: add uart rom script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 11/12] dma: imx-sdma: add i.mx6ul compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 10/12] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 09/12] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 08/12] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 07/12] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 06/12] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 05/12] dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 04/12] dmaengine: imx-sdma: remove duplicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 03/12] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 02/12] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 01/12] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v10 00/12] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH] spi: spi-geni-qcom: Don't set the cs if it was already right
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] spi: Avoid setting the chip select if we don't need to
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] spi: spi-geni-qcom: Don't set the cs if it was already right
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-geni-qcom: Don't set the cs if it was already right
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: Convert to use GPIO descriptors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: a3700: fix hang caused by a3700_spi_transfer_one_fifo()
  • From: Daisuke Yamane <yamane07ynct@xxxxxxxxx>
• [GIT PULL] SPI fixes for v5.8-rc3
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: Convert to use GPIO descriptors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH] spi: spi-geni-qcom: Don't set the cs if it was already right
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] spi: imx/fsl-lpspi: Convert to GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] spi: dw: Test the last revision of the DMA module
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: r8a7742: Add MSIOF[0123] support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: imx/fsl-lpspi: Convert to GPIO descriptors
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] spi: omap2-mcspi: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] spi: dw: Test the last revision of the DMA module
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] spi: npcm-pspi: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RFC] spi: dw: Test the last revision of the DMA module
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: lantiq-ssc: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: img-spfi: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: imx/fsl-lpspi: Convert to GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add support for Intel Tiger Lake PCH-H
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Tiger Lake PCH-H
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH V8 0/8] Add interconnect support to QSPI and QUP drivers
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] introduce fallback to pio in spi core
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/2] Some fixes for spi-altera
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: altera: fix module autoload
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 1/2] spi: altera: fix driver matching failure of the device ID "spi_altera"
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 0/2] Some fixes for spi-altera
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v10 01/17] spi: spi-mem: allow specifying whether an op is DTR or not
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 03/17] spi: atmel-quadspi: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 17/17] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 16/17] mtd: spi-nor: spansion: add support for Cypress Semper flash
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 12/17] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 15/17] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 14/17] mtd: spi-nor: core: disable Octal DTR mode on suspend.
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 13/17] mtd: spi-nor: core: perform a Soft Reset on shutdown
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 11/17] mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 09/17] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 04/17] spi: spi-mtk-nor: reject DTR ops
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 10/17] mtd: spi-nor: core: enable octal DTR mode when possible
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 08/17] mtd: spi-nor: core: use dummy cycle and address width info from SFDP
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 05/17] mtd: spi-nor: add support for DTR protocol
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 07/17] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 06/17] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 02/17] spi: spi-mem: allow specifying a command's extension
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• [PATCH v10 00/17] mtd: spi-nor: add xSPI Octal DTR support
  • From: Pratyush Yadav <p.yadav@xxxxxx>
• Re: [PATCH v2 04/16] b43: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH v2 3/6] spi: dw: Add Microchip Sparx5 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/6] spi: dw: Add Microchip Sparx5 support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH V8 7/8] spi: spi-qcom-qspi: Add interconnect support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V8 6/8] spi: spi-geni-qcom: Add interconnect support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V8 5/8] spi: spi-geni-qcom: Combine the clock setting code
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH V8 8/8] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 4/8] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 5/8] spi: spi-geni-qcom: Combine the clock setting code
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 7/8] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 3/8] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 6/8] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 2/8] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 0/8] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V8 1/8] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 04/16] b43: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 11/16] media: sur40: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH v2 13/16] mm/debug_vm_pgtable: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH v2 10/16] KVM: PPC: Book3S PR: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH v2 04/16] b43: Remove uninitialized_var() usage
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH v2 01/16] docs: deprecated.rst: Add uninitialized_var()
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] spi: fsl: add missing __iomem annotation
  • From: Luc Van Oostenryck <luc.vanoostenryck@xxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v4 1/4] spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 0/5] spi: spi-geni-qcom: Fixes / perf improvements
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 0/2] Some small spi geni cleanups
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [GIT PULL] SPI fixes for v5.8-rc2
  • From: broonie@xxxxxxxxxx
• Re: [PATCH v4 1/4] spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v4 2/4] spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v4 3/4] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v4 2/4] spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 3/4] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 4/4] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 1/4] spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/6] spi: dw: Add Microchip Sparx5 support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 00/16] Remove uninitialized_var() macro
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH v2 09/16] clk: spear: Remove uninitialized_var() usage
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 07/16] clk: st: Remove uninitialized_var() usage
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 00/16] Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 00/16] Remove uninitialized_var() macro
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 02/16] x86/mm/numa: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 05/16] rtlwifi: rtl8192cu: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 01/16] docs: deprecated.rst: Add uninitialized_var()
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 06/16] ide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 09/16] clk: spear: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 08/16] spi: davinci: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 07/16] clk: st: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 11/16] media: sur40: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 12/16] f2fs: Eliminate usage of uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 15/16] treewide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 16/16] compiler: Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 13/16] mm/debug_vm_pgtable: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 14/16] checkpatch: Remove awareness of uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 10/16] KVM: PPC: Book3S PR: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 04/16] b43: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 03/16] drbd: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 00/16] Remove uninitialized_var() macro
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v1 1/2] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v1 2/2] spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v1 0/2] Some small spi geni cleanups
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 6/5] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 7/5] spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND PATCH v2 0/3] add regmap & indirect access support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1] spi: npcm-fiu: Reuse BITS_PER_BYTE definition
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 0/5] spi: spi-geni-qcom: Fixes / perf improvements
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH v2 3/6] spi: dw: Add Microchip Sparx5 support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v2 2/6] arm64: dts: sparx5: Add SPI controller
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: sparx5: Add spi-nor support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: sparx5: Add spi-nand devices
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v2 4/6] dt-bindings: snps,dw-apb-ssi: Add sparx5, SPI slave snps,rx-sample-delay-ns and microchip,spi-interface2 properties.
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v2 0/6] spi: Adding support for Microchip Sparx5 SoC
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• [PATCH v2 1/6] spi: dw: Add support for RX sample delay register
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 0/8] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: fix missing octal defines
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 6/5] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spidev: fix missing octal defines
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [RESEND PATCH v2 1/3] spi: altera: use regmap-mmio instead of direct mmio register access
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [RESEND PATCH v2 2/3] spi: altera: support indirect access to the registers
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [RESEND PATCH v2 3/3] spi: altera: fix size mismatch on 64 bit processors
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [RESEND PATCH v2 0/3] add regmap & indirect access support
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Re: [PATCH v2 0/6] add regmap & indirect access support
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Re: [PATCH 6/5] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 7/5] spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 7/5] spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 6/5] spi: spi-geni-qcom: Simplify setup_fifo_xfer()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v3 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 0/6] add regmap & indirect access support
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 2/5] spi: spi-geni-qcom: Mo' betta locking
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 14/29] dt: Fix broken references to renamed docs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1] spi: npcm-fiu: Reuse BITS_PER_BYTE definition
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] spi: spi-geni-qcom: Fixes / perf improvements
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] add regmap & indirect access support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 0/6] add regmap & indirect access support
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH v2 4/6] spi: altera: use regmap-mmio instead of direct mmio register access
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH v2 6/6] spi: altera: fix size mismatch on 64 bit processors
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH v2 5/6] spi: altera: support indirect access to the registers
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v4 1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v4 1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 0/5] spi: spi-geni-qcom: Fixes / perf improvements
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 3/5] spi: spi-geni-qcom: Check for error IRQs
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 4/5] spi: spi-geni-qcom: Actually use our FIFO
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 2/5] spi: spi-geni-qcom: Mo' betta locking
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/2] spi: spidev: fix a potential use-after-free in spidev_release()
  • From: Zhenzhong Duan <zhenzhong.duan@xxxxxxxxx>
• [PATCH 1/2] spi: spidev: fix a race between spidev_release and spidev_remove
  • From: Zhenzhong Duan <zhenzhong.duan@xxxxxxxxx>
• Re: [PATCH v3 2/5] spi: spi-geni-qcom: Mo' betta locking
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/5] spi: spi-geni-qcom: Mo' betta locking
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 4/5] spi: spi-geni-qcom: Actually use our FIFO
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 3/5] spi: spi-geni-qcom: Check for error IRQs
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/5] spi: spi-geni-qcom: Mo' betta locking
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] genirq: Do not test disabled IRQs with DEBUG_SHIRQ
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 2/2] memory: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v4 2/2] spi: bcm63xx-hsspi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v4 1/2] spi: bcm63xx-spi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v4 0/2] spi: bcm63xx: add BMIPS support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• Re: [PATCH v3 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/4] spi: bcm63xx-hsspi: add reset support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 1/4] spi: bcm63xx-spi: add reset support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 2/2] spi: imx: add fallback feature
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 0/2] introduce fallback to pio in spi core
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
  • From: <patrice.chotard@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 1/5] spi: spi-geni-qcom: No need for irqsave variant of spinlock calls
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 3/5] spi: spi-geni-qcom: Check for error IRQs
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 5/5] spi: spi-geni-qcom: Don't keep a local state variable
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 4/5] spi: spi-geni-qcom: Actually use our FIFO
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/5] spi: spi-geni-qcom: Mo' betta locking
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 0/5] spi: spi-geni-qcom: Fixes / perf improvements
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] genirq: Do not test disabled IRQs with DEBUG_SHIRQ
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v2 3/3] genirq: Do not test disabled IRQs with DEBUG_SHIRQ
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/5] spi: bcm-qspi: Make multiple data blocks interrupt-driven
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 4/4] spi: bcm63xx-hsspi: allow building for BMIPS
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v3 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v3 3/4] spi: bcm63xx-hsspi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v3 1/4] spi: bcm63xx-spi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v3 0/4] spi: bcm63xx: add BMIPS support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V3 2/3] dt-bindings: spi: Convert imx cspi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 1/3] dt-bindings: spi: Convert mxs spi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 0/3] Convert mxs/imx spi/cspi/lpspi binding to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• [PATCH V3 3/3] dt-bindings: spi: Convert imx lpspi to json-schema
  • From: Anson Huang <Anson.Huang@xxxxxxx>
• Re: [PATCH 4/5] spi: bcm-qspi: Make multiple data blocks interrupt-driven
  • From: Mark Tomlinson <Mark.Tomlinson@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH 2/3] spi: bcm2835: Micro-optimise IRQ handler
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH 3/3] spi: bcm2835: Micro-optimise FIFO loops
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH 1/3] spi: bcm3835: Tidy up bcm2835_spi_reset_hw()
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH 0/3] spi: bcm2835: Interrupt-handling optimisations
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [RFC PATCH] spi: spi-cavium-thunderx: flag controller as half duplex
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/6] Add more configuration and regmap support for spi-altera
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/2] Add MSIOF support for R8A7742 SOC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [cadence-spi] daisy chain
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 05/10] ide: Remove uninitialized_var() usage
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 0/5] Improvements to spi-bcm-qspi
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 2/3] dt-bindings: spi: Convert imx cspi to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 1/3] dt-bindings: spi: Convert mxs spi to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 0/4] spi: bcm63xx: add BMIPS support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 4/4] spi: bcm63xx-hsspi: allow building for BMIPS
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 1/4] spi: bcm63xx-spi: add reset support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH] spi: uapi: spidev: Use TABs for alignment
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH] spi: uapi: spidev: Use TABs for alignment
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH] spi: uapi: spidev: Use TABs for alignment
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/5] spi: bcm-qspi: Make multiple data blocks interrupt-driven
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 3/5] spi: bcm-qspi: Do not split transfers into small chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/3] genirq: Do not test disabled IRQs with DEBUG_SHIRQ
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v6 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH v6 2/6] spi: spi-geni-qcom: Use OPP API to set clk/perf state
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/4] spi: bcm63xx: add BMIPS support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 14/29] dt: Fix broken references to renamed docs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 2/9] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v6 2/9] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 4/4] spi: bcm63xx-hsspi: allow building for BMIPS
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v2 3/4] spi: bcm63xx-hsspi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v2 1/4] spi: bcm63xx-spi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• Re: [PATCH v6 0/9] Enable ili9341 and l3gd20 on stm32f429-disco
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• [PATCH v2 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH v2 0/4] spi: bcm63xx: add BMIPS support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH 1/4] spi: bcm63xx-spi: add reset support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] genirq: Do not test disabled IRQs with DEBUG_SHIRQ
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 2/3] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/4] spi: bcm63xx-spi: allow building for BMIPS
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH 3/4] spi: bcm63xx-hsspi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH 4/4] spi: bcm63xx-hsspi: allow building for BMIPS
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH 1/4] spi: bcm63xx-spi: add reset support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• [PATCH 0/4] spi: bcm63xx: add BMIPS support
  • From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
• Re: [PATCH 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 14/29] dt: Fix broken references to renamed docs
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 14/29] dt: Fix broken references to renamed docs
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 1/5] spi: bcm-qspi: Add support for setting BSPI clock
  • From: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] spi: bcm-qspi: Do not split transfers into small chunks
  • From: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] spi: bcm-qspi: Make multiple data blocks interrupt-driven
  • From: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] spi: bcm-qspi: Improve debug reading SPI data
  • From: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] spi: bcm-qspi: Improve interrupt handling
  • From: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] Improvements to spi-bcm-qspi
  • From: Mark Tomlinson <mark.tomlinson@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH 1/2] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] spi: spi-fsl-dspi: Initialize completion before possible interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v4] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v4 2/2] memory: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: uapi: spidev: Use TABs for alignment
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [cadence-spi] daisy chain
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [cadence-spi] daisy chain
  • From: Adrian Fiergolski <adrian.fiergolski@xxxxxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH 4/6] spi: altera: use regmap instead of direct mmio register access
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Re: [PATCH 4/6] spi: altera: use regmap instead of direct mmio register access
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: How to extract opcode, addr, dummy and buffer in transfer_one_message()?
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] spi: altera: use regmap instead of direct mmio register access
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Re: [PATCH 6/6] spi: altera: fix size mismatch on 64 bit processors
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Re: [PATCH 5/6] spi: altera: move driver name string to header file
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• RE: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• How to extract opcode, addr, dummy and buffer in transfer_one_message()?
  • From: Stefan Schaeckeler <schaecsn@xxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH] spi: spi-fsl-dspi: Free DMA memory with matching function
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: tools: Make default_tx/rx and input_tx static
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: tools: Make default_tx/rx and input_tx static
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 5/6] spi: altera: move driver name string to header file
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 1/2] spi: tools: Make default_tx/rx and input_tx static
  • From: Qing Zhang <zhangqing@xxxxxxxxxxx>
• [PATCH v2 2/2] spi: tools: Add macro definitions to fix build errors
  • From: Qing Zhang <zhangqing@xxxxxxxxxxx>
• Re: [PATCH 0/6] Add more configuration and regmap support for spi-altera
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] spi: altera: fix size mismatch on 64 bit processors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/6] spi: altera: use regmap instead of direct mmio register access
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: tools: Fix build errors
  • From: zhangqing <zhangqing@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: tools: Fix build errors
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v1 RFC 2/2] spi: spi-imx: add fallback feature
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 RFC 1/2] spi: introduce fallback to pio
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 RFC 0/2] introduce fallback to pio in spi core
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH 1/2] spi: tools: Make default_tx/rx and input_tx static
  • From: Qing Zhang <zhangqing@xxxxxxxxxxx>
• [PATCH 2/2] spi: tools: Fix build errors
  • From: Qing Zhang <zhangqing@xxxxxxxxxxx>
• [PATCH 6/6] spi: altera: fix size mismatch on 64 bit processors
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 5/6] spi: altera: move driver name string to header file
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 2/6] spi: altera: add SPI core parameters support via platform data.
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 4/6] spi: altera: use regmap instead of direct mmio register access
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 3/6] spi: altera: add platform data for slave information.
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 1/6] spi: altera: add 32bit data width transfer support.
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• [PATCH 0/6] Add more configuration and regmap support for spi-altera
  • From: Xu Yilun <yilun.xu@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-fsl-dspi: Free DMA memory with matching function
  • From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
• [PATCH] spi: spi-fsl-dspi: Free DMA memory with matching function
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 05/10] spi: spi-dw-mmio: Spin off MSCC platforms into spi-dw-mchp
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 06/10] dt-bindings: spi: spi-dw-mchp: Add Sparx5 support
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: r8a7742: Add MSIOF[0123] support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 0/2] Add MSIOF support for R8A7742 SOC
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: spi: renesas,sh-msiof: Add r8a7742 support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 1/1] spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxx>
• Re: [PATCH V7 RESEND 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (EXT) Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/8] spi: rspi: Bit rate improvements
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 04/10] dt-bindings: spi: Add bindings for spi-dw-mchp
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• RE: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: (EXT) Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] spi: dw: Add support for RX sample delay register
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 01/10] spi: dw: Add support for polled operation via no IRQ specified in DT
  • From: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
• Re: [PATCH V7 RESEND 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Linux as a SPI slave?
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V7 RESEND 7/7] arm64: dts: sc7180: Add interconnect for QUP and QSPI
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 5/7] tty: serial: qcom_geni_serial: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 2/7] soc: qcom-geni-se: Add interconnect support to fix earlycon crash
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 4/7] spi: spi-geni-qcom: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 3/7] i2c: i2c-qcom-geni: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 0/7] Add interconnect support to QSPI and QUP drivers
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH V7 RESEND 1/7] soc: qcom: geni: Support for ICC voting
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH V7 6/7] spi: spi-qcom-qspi: Add interconnect support
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• RE: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• RE: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH AUTOSEL 5.7 018/274] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 036/274] spi: dw: Zero DMA Tx and Rx configurations on stack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 062/274] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 069/274] spi: mux: repair mux usage
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 098/274] spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 257/274] spi: spi-fsl-dspi: fix native data copy
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 255/274] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 013/175] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 017/175] spi: pxa2xx: Apply CS clk quirk to BXT
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 027/175] spi: dw: Zero DMA Tx and Rx configurations on stack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 044/175] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 056/175] spi: dw: Fix Rx-only DMA transfers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 066/175] spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 161/175] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 007/106] spi: pxa2xx: Apply CS clk quirk to BXT
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 012/106] spi: dw: Zero DMA Tx and Rx configurations on stack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 020/106] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 027/106] spi: dw: Fix Rx-only DMA transfers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 14/72] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 19/72] spi: dw: Fix Rx-only DMA transfers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 06/50] spi: dw: Zero DMA Tx and Rx configurations on stack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 09/50] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 48/50] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 03/37] spi: dw: Zero DMA Tx and Rx configurations on stack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 06/37] spi: dw: Enable interrupts in accordance with DMA xfer mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 35/37] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 68/72] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 09/72] spi: dw: Zero DMA Tx and Rx configurations on stack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 07/72] spi: pxa2xx: Apply CS clk quirk to BXT
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 099/106] spi: dw: Return any value retrieved from the dma_transfer callback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 080/274] spi: dw: Fix Rx-only DMA transfers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.7 025/274] spi: pxa2xx: Apply CS clk quirk to BXT
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev_test: Use %u to format unsigned numbers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH 4/8] spi: rspi: Increase bit rate accuracy on RZ/A
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 7/8] spi: rspi: Fill in spi_transfer.effective_speed_hz
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/8] spi: rspi: Clean up Bit Rate Division Setting handling
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/8] spi: rspi: Use requested instead of maximum bit rate
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] spi: spidev_test: Use %u to format unsigned numbers
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/8] spi: rspi: Bit rate improvements
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/8] spi: rspi: Remove useless .set_config_register() check
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 6/8] spi: rspi: Increase bit rate range for QSPI
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 5/8] spi: rspi: Increase bit rate range for RSPI on SH
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 8/8] spi: rspi: Fill in controller speed limits
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: (EXT) [PATCH v9 RESEND 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v9 RESEND 13/13] dmaengine: imx-sdma: add uart rom script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 12/13] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 11/13] dma: imx-sdma: add i.mx6ul compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 10/13] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 08/13] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 09/13] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 07/13] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 06/13] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 04/13] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 05/13] dmaengine: imx-sdma: remove duplicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 03/13] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 02/13] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 01/13] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 RESEND 00/13] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: spi-oc-tiny.c and microwatt chip select
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: spi-oc-tiny.c and microwatt chip select
  • From: Mark Brown <broonie@xxxxxxxxxx>
• CS# timings
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• spi-oc-tiny.c and microwatt chip select
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 05/14] spi: imx: fallback to PIO if dma setup failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v9 14/14] dmaengine: imx-sdma: add uart rom script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 13/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 12/14] dma: imx-sdma: add i.mx6ul compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 10/14] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 11/14] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 09/14] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 08/14] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 07/14] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 06/14] spi: imx: add dma_sync_sg_for_device after fallback from dma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 05/14] spi: imx: fallback to PIO if dma setup failure
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v9 02/14] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>