Linux on Synopsys ARC Processors - Date Index

• Thread Index

• [uclibc-ng-devel] [PATCH v2] Fix subtle race in tst-cancel2 / tst-cancelx2
  • From: wbx@xxxxxxxxxxxxx (Waldemar Brodkorb)
• [uclibc-ng-devel] [PATCH v2] Fix subtle race in tst-cancel2 / tst-cancelx2
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] ARC: Force disable IOC if we don't want to use it
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• kisskb: FAILED linux-next/axs101_defconfig/arcompact Mon Dec 18, 17:27
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: FAILED linux-next/axs103_smp_defconfig/arcv2 Mon Dec 18, 17:27
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH 0/4] ARC: Set initial core pll output frequency via DTS
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• rsi_91x: Failed to read status register on failed authentication
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• rsi_91x: Low bandwidth: sends ~100 Kbits/sec, receives ~1.5 Mbits/sec
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• rsi_91x: Low bandwidth: sends ~100 Kbits/sec, receives ~1.5 Mbits/sec
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: dts: Remove leading 0x and 0s from bindings notation
  • From: robh+dt@xxxxxxxxxx (Rob Herring)
• rsi_91x: Low bandwidth: sends ~100 Kbits/sec, receives ~1.5 Mbits/sec
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• UDL's fbdev doesn't work for user-space apps
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v2] arch: define weak abort
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• UDL's fbdev doesn't work for user-space apps
  • From: noralf@xxxxxxxxxxx (Noralf Trønnes)
• UDL's fbdev doesn't work for user-space apps
  • From: pavel@xxxxxx (Pavel Machek)
• UDL's fbdev doesn't work for user-space apps
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: Force disable IOC if ioc_enable=0
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [U-Boot] Please pull ARC changes
  • From: trini@xxxxxxxxxxxx (Tom Rini)
• [PATCH] arch: define weak abort
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [U-Boot] Please pull ARC changes
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCHv2 11/13] irq debug: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 00/13] replace print_symbol() with printk()-s
  • From: joe@xxxxxxxxxxx (Joe Perches)
• [PATCH 11/13] irq debug: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 00/13] replace print_symbol() with printk()-s
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 08/13] x86: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 13/13] arc: do not use __print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 08/13] x86: do not use print_symbol()
  • From: bp@xxxxxxxxx (Borislav Petkov)
• [PATCH 13/13] arc: do not use __print_symbol()
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 00/13] replace print_symbol() with printk()-s
  • From: joe@xxxxxxxxxxx (Joe Perches)
• [PATCH 11/13] irq debug: do not use print_symbol()
  • From: David.Laight@xxxxxxxxxx (David Laight)
• [PATCH 13/13] arc: do not use __print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 12/13] lib: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 11/13] irq debug: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 10/13] sysfs: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 09/13] drivers: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 08/13] x86: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 07/13] unicore32: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 06/13] sh: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 05/13] mn10300: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 04/13] ia64: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 03/13] c6x: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 02/13] arm64: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 01/13] arm: do not use print_symbol()
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH 00/13] replace print_symbol() with printk()-s
  • From: sergey.senozhatsky.work@xxxxxxxxx (Sergey Senozhatsky)
• UDL's fbdev doesn't work for user-space apps
  • From: pavel@xxxxxx (Pavel Machek)
• [PATCH 4/4] ARC: [plat-axs103] refactor the quad core DT quirk code
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 3/4] ARC: [plat-axs103]: Set initial core pll output frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/4] ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/4] ARC: [plat-hsdk]: Set initial core pll output frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/4] ARC: Set initial core pll output frequency via DTS
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/2] ARC: provide for gcc "isolate path" induced generated abort calls
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 1/2] ARC: uaccess: dont use "l" inline as constraint
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] Fix subtle race in tst-cancel2 / tst-cancelx2
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] Fix subtle race in tst-cancel2 / tst-cancelx2
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 0/6] glibc port to ARC architecture
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 0/6] glibc port to ARC architecture
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 0/4] ARC: Set initial core pll output frequency via DTS
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] frv: fix build failure
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• rsi_91x: Failed to read status register on failed authentication
  • From: amitkarwar@xxxxxxxxx (Amitkumar Karwar)
• rsi_91x: Failed to read status register on failed authentication
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRM
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: Force disable IOC if ioc_enable=0
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• etnaviv: PHYS_OFFSET usage
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: emil.l.velikov@xxxxxxxxx (Emil Velikov)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• UDL's fbdev doesn't work for user-space apps
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• UDL's fbdev doesn't work for user-space apps
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] frv: fix build failure
  • From: sudipm.mukherjee@xxxxxxxxx (Sudip Mukherjee)
• [PATCH] ARC: Enable machine_desc->init_per_cpu for non-SMP configs
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: Enable machine_desc->init_per_cpu for non-SMP configs
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [RFC 0/6] glibc port to ARC architecture
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 0/6] glibc port to ARC architecture
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 4/4] ARC: [plat-axs103] refactor the quad core DT quirk code
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 3/4] ARC: [plat-axs103]: Set initial core pll output frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/4] ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/4] ARC: [plat-hsdk]: Set initial core pll output frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/4] ARC: Set initial core pll output frequency via DTS
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] frv: fix build failure
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: l.stach@xxxxxxxxxxxxxx (Lucas Stach)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: l.stach@xxxxxxxxxxxxxx (Lucas Stach)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: l.stach@xxxxxxxxxxxxxx (Lucas Stach)
• glxgears on Etnaviv: couldn't get an RGB, Double-buffered visual
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] frv: fix build failure
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] frv: fix build failure
  • From: sudipm.mukherjee@xxxxxxxxx (Sudip Mukherjee)
• [PATCH] frv: fix build failure
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: Reverse logic of enabled dual-issue detection
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [GIT PULL] ARC updates for 4.15-rc1
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• glibc: nptl/tst-cancel17 and librt issue
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 4/4] ARCv2: entry: Reduce perf intr return path
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 0/4] ARC perf updates
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• glibc: nptl/tst-cancel17 and librt issue
  • From: schwab@xxxxxxxxxxxxxx (Andreas Schwab)
• glibc: nptl/tst-cancel17 and librt issue
  • From: schwab@xxxxxxxxxxxxxx (Andreas Schwab)
• [PATCH 0/4] ARC perf updates
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• glibc: nptl/tst-cancel17 and librt issue
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• glibc: nptl/tst-cancel17 and librt issue
  • From: schwab@xxxxxxxxxxxxxx (Andreas Schwab)
• glibc: nptl/tst-cancel17 and librt issue
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• glibc: nptl/tst-cancel17 and librt issue
  • From: zackw@xxxxxxxxx (Zack Weinberg)
• glibc: nptl/tst-cancel17 and librt issue
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] [ARC] update GLIBC_DYNAMIC_LINKER per glibc upstreaming review comments
  • From: Claudiu.Zissulescu@xxxxxxxxxxxx (Claudiu Zissulescu)
• [PATCH 4/4] ARCv2: entry: Reduce perf intr return path
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] [ARC] update GLIBC_DYNAMIC_LINKER per glibc upstreaming review comments
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] [ARC] update GLIBC_DYNAMIC_LINKER per glibc upstreaming review comments
  • From: Claudiu.Zissulescu@xxxxxxxxxxxx (Claudiu Zissulescu)
• etnaviv: PHYS_OFFSET usage
  • From: l.stach@xxxxxxxxxxxxxx (Lucas Stach)
• etnaviv: PHYS_OFFSET usage
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• etnaviv: PHYS_OFFSET usage
  • From: l.stach@xxxxxxxxxxxxxx (Lucas Stach)
• etnaviv: PHYS_OFFSET usage
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Flush and invalidate caches on start
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 4/4] ARCv2: entry: Reduce perf intr return path
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• kisskb: OK linux-next/axs101_defconfig/arcompact Wed Nov 15, 20:44
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linux-next/axs103_smp_defconfig/arcv2 Wed Nov 15, 20:44
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs101_defconfig/arcompact Wed Nov 15, 17:49
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs103_smp_defconfig/arcv2 Wed Nov 15, 17:48
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: sboyd@xxxxxxxxxxxxxx (sboyd@xxxxxxxxxxxxxx)
• [PATCH 4/4] ARCv2: entry: Reduce perf intr return path
  • From: vineetg76@xxxxxxxxx (Vineet Gupta)
• [PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: vladimir_zapolskiy@xxxxxxxxxx (Vladimir Zapolskiy)
• [PATCH 2/2] ARC: [plat-axs10x]: Remove platform quirk to reset ethernet IP
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/2] ARC: [plat-axs10x]: DTS: Add reset controller node to manage ethernet reset
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/2] ARC: [plat-axs10x]: enable reset controller driver usage
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• kisskb: OK linus/axs101_defconfig/arcompact Tue Nov 14, 22:24
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs103_smp_defconfig/arcv2 Tue Nov 14, 22:22
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH 4/4] ARCv2: entry: Reduce perf intr return path
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• [PATCH] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: sboyd@xxxxxxxxxxxxxx (sboyd@xxxxxxxxxxxxxx)
• [PATCH 0/4] ARC perf updates
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• kisskb: OK linus/axs101_defconfig/arcompact Mon Nov 13, 22:45
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs103_smp_defconfig/arcv2 Mon Nov 13, 22:45
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH] [ARC] update GLIBC_DYNAMIC_LINKER per glibc upstreaming review comments
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• arc patch from glibc repo
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARCv2: Accomodate NS48 MMUv5 by releaxing MMU ver checking
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 4/4] ARCv2: entry: Reduce perf intr return path
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/4] ARC: perf: avoid vmalloc backed mmap
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 2/4] ARCv2: perf: optimize given that num counters <= 32
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 1/4] ARCv2: perf: tweak overflow interrupt
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 0/4] ARC perf updates
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARCv2: Accomodate NS48 MMUv5 by releaxing MMU ver checking
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARCv2: Accomodate NS48 MMUv5 by releaxing MMU ver checking
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v2 2/2] console: don't select first registered console if stdout-path used
  • From: pmladek@xxxxxxxx (Petr Mladek)
• [gcc] backport of gcc patch to #gcc-7-branch
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 0/6] glibc port to ARC architecture
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 0/6] glibc port to ARC architecture
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARCv2: Accomodate NS48 MMUv5 by releaxing MMU ver checking
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [GIt PULL] ARC fixes for 4.14-rc7
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: Memory barriers for everyone!
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: Memory barriers for everyone!
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [RFC] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [RFC] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC] ARC: [plat-hsdk]: Increase SDIO CIU frequency to 50000000Hz
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [GIT PULL] ARC updates for 4.14-rc4
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [GIT PULL] Reset controller fixes for v4.14
  • From: olof@xxxxxxxxx (Olof Johansson)
• [GIT PULL] Reset controller fixes for v4.14
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/2] ARCv2: boot log: identify HS48 cores (dual issue)
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 1/2] ARC: boot log: decontaminate ARCv2 ISA_CONFIG register
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] CLK: ARC: Set initial pll output frequency specified in device tree
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: remove the misleading v1 suffix all over
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: remove the misleading v1 suffix all over
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] arch: remove unused *_segments() macros/functions
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arch: remove unused *_segments() macros/functions
  • From: tklauser@xxxxxxxxxx (Tobias Klauser)
• [PATCH] reset: Restrict RESET_HSDK_V1 to ARC_SOC_HSDK or COMPILE_TEST
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] arc: remove redundant UTS_MACHINE define in arch/arc/Makefile
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: remove redundant UTS_MACHINE define in arch/arc/Makefile
  • From: yamada.masahiro@xxxxxxxxxxxxx (Masahiro Yamada)
• [PATCH] reset: Restrict RESET_HSDK_V1 to ARC_SOC_HSDK or COMPILE_TEST
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH v2] ARC: reset: introduce AXS10x reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: remove the misleading v1 suffix all over
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] ARC: [plat-axs10x]: DTS: fix sdio ciu frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: Memory barriers for everyone!
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] ARC: [plat-axs10x]: DTS: fix sdio ciu frequency
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: [plat-axs10x]: DTS: fix sdio ciu frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: remove the misleading v1 suffix all over
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] reset: Restrict RESET_HSDK_V1 to ARC_SOC_HSDK or COMPILE_TEST
  • From: geert@xxxxxxxxxxxxxx (Geert Uytterhoeven)
• [PATCH] ARC: reset: remove the misleading v1 suffix all over
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] ARC: reset: introduce AXS10x reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] ARC: Reenable soft lock-up detector
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: HSDK: DTS: Temporary fix of sdio ciu frequency
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: HSDK: DTS: Temporary fix of sdio ciu frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [GIT PULL] ARC changes for 4.4-rc1
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: AXS10x: Add temporary quirk to reset ethernet IP
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: AXS10x: Add temporary quirk to reset ethernet IP
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: AXS10x: Add temporary quirk to reset ethernet IP
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• Setting CPU clock frequency on early boot
  • From: robh@xxxxxxxxxx (Rob Herring)
• [PATCH] ARC: AXS10x: Add temporary quirk to reset ethernet IP
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v2 2/2] console: don't select first registered console if stdout-path used
  • From: paul.burton@xxxxxxxxxx (Paul Burton)
• [PATCH v2 2/2] console: don't select first registered console if stdout-path used
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• Setting CPU clock frequency on early boot
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• Setting CPU clock frequency on early boot
  • From: robh@xxxxxxxxxx (Rob Herring)
• Setting CPU clock frequency on early boot
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• Setting CPU clock frequency on early boot
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• Setting CPU clock frequency on early boot
  • From: robh@xxxxxxxxxx (Rob Herring)
• Setting CPU clock frequency on early boot
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v2 2/2] console: don't select first registered console if stdout-path used
  • From: pmladek@xxxxxxxx (Petr Mladek)
• [PATCH] ARC: HSDK: Add core pll node to DT to manage cpu clk
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: Machine Check Exception: enable MMU in single place
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] arc: Re-enable MMU upon a Machine Check exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] arc: Re-enable MMU upon die()
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] arc: Re-enable MMU upon a Machine Check exception
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH v2] arc: Re-enable MMU upon die()
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH v2] arc: Re-enable MMU upon die()
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] arc: Re-enable MMU upon die()
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Re-enable MMU upon die()
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Re-enable MMU upon die()
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] arc: Re-enable MMU upon die()
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Re-enable MMU upon die()
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] ARC: reset: remove the misleading v1 suffix all over
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/3 v8] ARC: hsdk: initial port for HSDK board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Flush and invalidate caches on start
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Flush and invalidate caches on start
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Flush and invalidate caches on start
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v3] earlycon: initialise baud field of earlycon device structure
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: introduce AXS10x reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v4] ARC: clk: introduce HSDK pll driver
  • From: sboyd@xxxxxxxxxxxxxx (Stephen Boyd)
• [PATCH] arc: Show fault information passed to show_kernel_fault_diag()
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Show fault information passed to show_kernel_fault_diag()
  • From: Jose.Abreu@xxxxxxxxxxxx (Jose Abreu)
• [PATCH] ARCv2: SMP: Mask only private-per-core IRQ lines on boot at core intc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC fix for 4.13-final
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 2/2] console: don't select first registered console if stdout-path used
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v2 1/2] OF: move extern declarations of of_stdout inside ifdef
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v2 0/2] console: don't select first registered console if stdout-path used
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] console: don't select first registered console if stdout-path used
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3 0/2] Add platform support for Adaptrum Anarion SOC
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3 03/11] ARC: Allow irq threading
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCH v3 03/11] ARC: Allow irq threading
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCH v3 03/11] ARC: Allow irq threading
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 1/1] futex: remove duplicated code and fix UB
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCHi v2] arc: Mask individual IRQ lines during core INTC init
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: arcv2: Mask only private-per-core IRQ lines on boot
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v4] ARC: clk: introduce HSDK pll driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] OF: move extern declarations of of_stdout inside ifdef
  • From: robh+dt@xxxxxxxxxx (Rob Herring)
• [PATCH] console: don't select first registered console if stdout-path used
  • From: sergey.senozhatsky@xxxxxxxxx (Sergey Senozhatsky)
• [PATCH v4] ARC: clk: introduce HSDK pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCHi v2] arc: Mask individual IRQ lines during core INTC init
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCHi v2] arc: Mask individual IRQ lines during core INTC init
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] OF: move extern declarations of of_stdout inside ifdef
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3 v8] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] OF: move extern declarations of entry pointers inside ifdef
  • From: robh@xxxxxxxxxx (Rob Herring)
• [PATCH] OF: move extern declarations of entry pointers inside ifdef
  • From: rostedt@xxxxxxxxxxx (Steven Rostedt)
• [PATCH] OF: move extern declarations of entry pointers inside ifdef
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] OF: move extern declarations of entry pointers inside ifdef
  • From: rostedt@xxxxxxxxxxx (Steven Rostedt)
• [PATCH] OF: move extern declarations of entry pointers inside ifdef
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCHi v2] arc: Mask individual IRQ lines during core INTC init
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] console: don't select first registered console if stdout-path used
  • From: rostedt@xxxxxxxxxxx (Steven Rostedt)
• [PATCH] console: don't select first registered console if stdout-path used
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] arc: Mask individual IRQ lines during core INTC init
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 1/1] futex: remove duplicated code and fix UB
  • From: will.deacon@xxxxxxx (Will Deacon)
• [PATCH v2 1/1] futex: remove duplicated code and fix UB
  • From: jslaby@xxxxxxx (Jiri Slaby)
• [PATCH 4/5] ARC: AXS103: DTS: Set cpu frequency explicitly via dts
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/5] ARC: AXS103: DTS: Add core pll node to manage cpu frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 4/5] ARC: AXS103: DTS: Set cpu frequency explicitly via dts
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3 v8] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 4/5] ARC: AXS103: DTS: Set cpu frequency explicitly via dts
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/5] ARC: AXS103: DTS: Add core pll node to manage cpu frequency
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/5] ARC: AXS103: DTS: Add core pll node to manage cpu frequency
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 2/5] ARC: AXS103: Get rid of platform specific cpu clock configuration
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• Specifying console via "stdout-path" property
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3 07/11] ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3] ARC: clk: introduce HSDKv1 pll driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3 07/11] ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [GIT PULL] ARC fixes for 4.13
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] ARC: clk: introduce HSDKv1 pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3] earlycon: initialise baud field of earlycon device structure
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• kisskb: OK linus/axs101_defconfig/arcompact Sat Aug 19, 14:00
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs103_smp_defconfig/arcv2 Sat Aug 19, 14:00
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs101_defconfig/arcompact Sat Aug 19, 09:45
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linus/axs103_smp_defconfig/arcv2 Sat Aug 19, 09:45
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH 3.16 082/134] usb: Make sure usb/phy/of gets built-in
  • From: ben@xxxxxxxxxxxxxxx (Ben Hutchings)
• [PATCH 3.2 41/59] usb: Make sure usb/phy/of gets built-in
  • From: ben@xxxxxxxxxxxxxxx (Ben Hutchings)
• [PATCH v2] earlycon: initialise baud field of earlycon device structure
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3 2/2] ARC: DTS: Add device-tree for Anarion-based development board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v3 2/2] ARC: DTS: Add device-tree for Anarion-based development board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3 2/2] ARC: DTS: Add device-tree for Anarion-based development board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v3 2/2] ARC: DTS: Add device-tree for Anarion-based development board
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH v3 1/2] ARC: [plat-sim] Add .compatible property for Adaptrum Anarion SOC
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH v3 0/2] Add platform support for Adaptrum Anarion SOC
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• Adding new ARC platforms (was Re: Handling stub code for new platforms)
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH] earlycon: initialise baud field of earlycon device structure
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] earlycon: initialise baud field of earlycon device structure
  • From: robherring2@xxxxxxxxx (Rob Herring)
• [PATCH] earlycon: initialise baud field of earlycon device structure
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] earlycon: initialise baud field of earlycon device structure
  • From: robherring2@xxxxxxxxx (Rob Herring)
• [PATCH 3/3] ARC: hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/3] ARC: Decouple linux kernel memory address and link address
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/3 v8] hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] hsdk: Enable INPUT_EVDEV
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] earlycon: initialise baud field of earlycon device structure
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] hsdk: Enable INPUT_EVDEV
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v2] ARC: clk: introduce HSDKv1 pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 5/5] ARC: AXS103: use cpu-freq param instead of /cpu_card/core_clk
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 4/5] ARC: AXS103: DTS: Set cpu frequency explicitly via dts
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 3/5] ARC: AXS103: DTS: Add core pll node to manage cpu frequency
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/5] ARC: AXS103: Get rid of platform specific cpu clock configuration
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/5] ARC: set and print cpu frequency at boot time
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/5] Updates to arc clock tree managment
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v2] ARC: HSDK: Add reset controller node to manage ethernet reset
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: introduce AXS10x reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• Adding new ARC platforms (was Re: Handling stub code for new platforms)
  • From: vgupta@xxxxxxxxxxxx (Vineet Gupta)
• Adding new ARC platforms (was Re: Handling stub code for new platforms)
  • From: vgupta@xxxxxxxxxxxx (Vineet Gupta)
• Adding new ARC platforms (was Re: Handling stub code for new platforms)
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• ARC stuff (was Re: [PATCH -v2 1/4] mm: Rework {set,clear,mm}_tlb_flush_pending())
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• [PATCH] ARC: reset: introduce AXS10x reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• Adding new ARC platforms (was Re: Handling stub code for new platforms)
  • From: vgupta@xxxxxxxxxxxx (Vineet Gupta)
• Handling stub code for new platforms
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH] arc: Mask individual IRQ lines during core INTC init
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH] ARC: reset: introduce AXS10x reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] arc: Mask individual IRQ lines during core INTC init
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: HSDK: DTS: Add reset controller node to manage ethernet reset
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: clk: introduce HSDKv1 pll driver
  • From: sboyd@xxxxxxxxxxxxxx (sboyd@xxxxxxxxxxxxxx)
• [PATCH] ARC: clk: introduce HSDKv1 pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v2 2/2] ARC: DTS: Add device-tree for Anarion-based development board
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH v2 1/2] ARC: [plat-anarion] Add early boot workarounds for Anarion SOC
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• update timer frequencies
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• update timer frequencies
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: clk: introduce HSDKv1 pll driver
  • From: sboyd@xxxxxxxxxxxxxx (Stephen Boyd)
• [PATCH 3/5] net: stmmac: Add Adaptrum Anarion GMAC glue layer
  • From: robh@xxxxxxxxxx (Rob Herring)
• [PATCH 1/5] of: Add vendor prefix for Adaptrum, Inc.
  • From: robh@xxxxxxxxxx (Rob Herring)
• [PATCH 3/5] net: stmmac: Add Adaptrum Anarion GMAC glue layer
  • From: robh@xxxxxxxxxx (Rob Herring)
• Please pull ARCPGU changes
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PULL] Please pull ARCPGU changes
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• pci: Add generic pcibios_{fixup_bus,align_resource}
  • From: helgaas@xxxxxxxxxx (Bjorn Helgaas)
• Please pull ARCPGU changes
  • From: alexdeucher@xxxxxxxxx (Alex Deucher)
• snps, dwmac interrupt storm (Was: ARC770: "unexpected IRQ trap at vector 00" during boot)
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• ARC stuff (was Re: [PATCH -v2 1/4] mm: Rework {set,clear,mm}_tlb_flush_pending())
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• ARC stuff (was Re: [PATCH -v2 1/4] mm: Rework {set,clear,mm}_tlb_flush_pending())
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• Please pull ARCPGU changes
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• Please pull ARCPGU changes
  • From: daniel@xxxxxxxx (Daniel Vetter)
• [PATCH] arc: arcv2: cache: Explicitly set MSB counterpart of region ops addresses
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: arcv2: cache: Explicitly set MSB counterpart of region ops addresses
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• snps,dwmac interrupt storm (Was: ARC770: "unexpected IRQ trap at vector 00" during boot)
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• snps, dwmac interrupt storm (Was: ARC770: "unexpected IRQ trap at vector 00" during boot)
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: arcv2: cache: Explicitly set MSB counterpart of region ops addresses
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• snps,dwmac interrupt storm (Was: ARC770: "unexpected IRQ trap at vector 00" during boot)
  • From: alex.g@xxxxxxxxxxxx (Alex)
• [PATCH] arc: arcv2: cache: Explicitly set MSB counterpart of region ops addresses
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: marek.vasut@xxxxxxxxx (Marek Vasut)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: marek.vasut@xxxxxxxxx (Marek Vasut)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: marek.vasut@xxxxxxxxx (Marek Vasut)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 3/5] net: stmmac: Add Adaptrum Anarion GMAC glue layer
  • From: alex.g@xxxxxxxxxxxx (Alex)
• [PATCH 5/5] ARC: DTS: Add device-tree for Anarion-based development board
  • From: alex.g@xxxxxxxxxxxx (Alex)
• Please pull ARCPGU changes
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 5/5] ARC: DTS: Add device-tree for Anarion-based development board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 0/5] earlycon hang under some conditions
  • From: andy.shevchenko@xxxxxxxxx (Andy Shevchenko)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: lkp@xxxxxxxxx (kbuild test robot)
• [PATCH 1/5] of: Add vendor prefix for Adaptrum, Inc.
  • From: afaerber@xxxxxxx (Andreas Färber)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: marek.vasut@xxxxxxxxx (Marek Vasut)
• [PATCH 3/5] net: stmmac: Add Adaptrum Anarion GMAC glue layer
  • From: davem@xxxxxxxxxxxxx (David Miller)
• [PATCH 5/5] ARC: DTS: Add device-tree for Anarion-based development board
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 4/5] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 3/5] net: stmmac: Add Adaptrum Anarion GMAC glue layer
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 2/5] ARC: [plat-anarion] Add early boot workarounds for Anarion SOC
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 1/5] of: Add vendor prefix for Adaptrum, Inc.
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH 0/5] Initial support for Adaptrum Anarion SOC
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• [PATCH] ARC: clk: introduce HSDKv1 pll driver
  • From: sboyd@xxxxxxxxxxxxxx (Stephen Boyd)
• [PATCH] ARC: clk: introduce HSDKv1 pll driver
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• ARC770: "unexpected IRQ trap at vector 00" during boot
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• ARC770: "unexpected IRQ trap at vector 00" during boot
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• ARC770: "unexpected IRQ trap at vector 00" during boot
  • From: alex.g@xxxxxxxxxxxx (Alex)
• [PATCH 0/5] earlycon hang under some conditions
  • From: dianders@xxxxxxxxxxxx (Doug Anderson)
• ARC770: "unexpected IRQ trap at vector 00" during boot
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• ARC770: "unexpected IRQ trap at vector 00" during boot
  • From: alex.g@xxxxxxxxxxxx (Alexandru Gagniuc)
• kisskb: OK linux-next/axs101_defconfig/arcompact Mon Jul 24, 18:27
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linux-next/axs103_smp_defconfig/arcv2 Mon Jul 24, 18:26
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH v2] ARC: reset: introduce HSDKv1 reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] NET: dwmac: Make dwmac reset unconditional
  • From: davem@xxxxxxxxxxxxx (David Miller)
• [PATCH v2] ARC: reset: introduce HSDKv1 reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: introduce HSDKv1 reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH] ARC: reset: introduce HSDKv1 reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] ARC: reset: introduce HSDKv1 reset driver
  • From: p.zabel@xxxxxxxxxxxxxx (Philipp Zabel)
• [PATCH 0/5] earlycon hang under some conditions
  • From: dianders@xxxxxxxxxxxx (Doug Anderson)
• [PATCH 0/5] earlycon hang under some conditions
  • From: briannorris@xxxxxxxxxxxx (Brian Norris)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: reset: introduce HSDKv1 reset driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] arc: Hardcode ARCH_DMA_MINALIGN to max line length we may have
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Hardcode ARCH_DMA_MINALIGN to max line length we may have
  • From: alexey.brodkin@xxxxxxxxx (Alexey Brodkin)
• [PATCH] NET: dwmac: Make dwmac reset unconditional
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] arc: remove num-slots from arc platforms
  • From: shawn.lin@xxxxxxxxxxxxxx (Shawn Lin)
• [RFC PATCH 1/5] serial: arc: Remove __init marking from early write
  • From: jeffy.chen@xxxxxxxxxxxxxx (jeffy)
• [PATCH 1/5] serial: arc: Remove __init marking from early write
  • From: jeffy.chen@xxxxxxxxxxxxxx (Jeffy Chen)
• [PATCH 0/5] earlycon hang under some conditions
  • From: jeffy.chen@xxxxxxxxxxxxxx (Jeffy Chen)
• [RFC PATCH 1/5] serial: arc: Remove __init marking from early write
  • From: gregkh@xxxxxxxxxxxxxxxxxxx (Greg KH)
• [RFC PATCH 1/5] serial: arc: Remove __init marking from early write
  • From: jeffy.chen@xxxxxxxxxxxxxx (Jeffy Chen)
• [RFC PATCH 0/5] earlycon hang under some conditions
  • From: jeffy.chen@xxxxxxxxxxxxxx (Jeffy Chen)
• [PATCH 3/3 v8] ARC: hsdk: initial port for HSDK board
  • From: robh@xxxxxxxxxx (Rob Herring)
• semantics of dma_map_single()
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• semantics of dma_map_single()
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• semantics of dma_map_single()
  • From: hch@xxxxxx (Christoph Hellwig)
• semantics of dma_map_single()
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: clk: introduce HSDKv1 pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v4] clk: axs10x: introduce AXS10X pll driver
  • From: sboyd@xxxxxxxxxxxxxx (sboyd@xxxxxxxxxxxxxx)
• [PATCH 3/3 v8] ARC: hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/3 v8] ARC: Decouple linux kernel memory address and link address
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3 v8] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/3 v8] hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v4] clk: axs10x: introduce AXS10X pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH v4] clk: axs10x: introduce AXS10X pll driver
  • From: sboyd@xxxxxxxxxxxxxx (Stephen Boyd)
• [PATCH 3/3 v7] ARC: hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• kisskb: OK linux-next/axs101_defconfig/arcompact Mon Jul 10, 19:11
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: OK linux-next/axs103_smp_defconfig/arcv2 Mon Jul 10, 19:11
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH 3/3 v7] ARC: hsdk: initial port for HSDK board
  • From: robh@xxxxxxxxxx (Rob Herring)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARC: AXS: prepare dts files for enabling PAE40 on axs103
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] ARC: AXS: prepare dts files for enabling PAE40 on axs103
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] ARCv2: SLC: Make sure busy bit is set properly for region ops
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: jh80.chung@xxxxxxxxxxx (Jaehoon Chung)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: shawn.lin@xxxxxxxxxxxxxx (Shawn Lin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: jh80.chung@xxxxxxxxxxx (Jaehoon Chung)
• [PATCH v4] clk: axs10x: introduce AXS10X pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: jh80.chung@xxxxxxxxxxx (Jaehoon Chung)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: remove num-slots from arc platforms
  • From: jh80.chung@xxxxxxxxxxx (Jaehoon Chung)
• [PATCH] arc: remove num-slots from arc platforms
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• kisskb: FAILED linux-next/axs101_defconfig/arcompact Wed Jul 05, 17:36
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• kisskb: FAILED linux-next/axs103_smp_defconfig/arcv2 Wed Jul 05, 17:35
  • From: noreply@xxxxxxxxxxxxxx (noreply@xxxxxxxxxxxxxx)
• [PATCH] arc: remove num-slots from arc platforms
  • From: shawn.lin@xxxxxxxxxxxxxx (Shawn Lin)
• [PATCH 3/3 v7] ARC: hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/3 v7] ARC: Decouple linux kernel memory address and link address
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3 v7] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/3 v7] hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/1] futex: remove duplicated code and fix UB
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCH] ARC: Fix wrong access to "sp" member in user_regs_struct
  • From: ldv@xxxxxxxxxxxx (Dmitry V. Levin)
• [PATCH] ARC: Fix wrong access to "sp" member in user_regs_struct
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH RFC 10/26] arc: Remove spin_unlock_wait() arch-specific definitions
  • From: paulmck@xxxxxxxxxxxxxxxxxx (Paul E. McKenney)
• [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board
  • From: robh@xxxxxxxxxx (Rob Herring)
• ucontect vs. ucontext_t (was Re: [RFC 4/6] ARC: Initial port to glibc)
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• ucontect vs. ucontext_t (was Re: [RFC 4/6] ARC: Initial port to glibc)
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• ucontect vs. ucontext_t (was Re: [RFC 4/6] ARC: Initial port to glibc)
  • From: szabolcs.nagy@xxxxxxx (Szabolcs Nagy)
• ucontect vs. ucontext_t (was Re: [RFC 4/6] ARC: Initial port to glibc)
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: helgaas@xxxxxxxxxx (Bjorn Helgaas)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 2/6] ARC: Fixed inline asm contraints to gcc 6.x
  • From: zackw@xxxxxxxxx (Zack Weinberg)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 2/6] ARC: Fixed inline asm contraints to gcc 6.x
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 0/6] glibc port to ARC architecture
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: fweimer@xxxxxxxxxx (Florian Weimer)
• [RFC 0/6] glibc port to ARC architecture
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 2/6] ARC: Fixed inline asm contraints to gcc 6.x
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 0/6] glibc port to ARC architecture
  • From: joseph@xxxxxxxxxxxxxxxx (Joseph Myers)
• [RFC 0/6] glibc port to ARC architecture
  • From: fweimer@xxxxxxxxxx (Florian Weimer)
• [RFC 4/6] ARC: Initial port to glibc
  • From: fweimer@xxxxxxxxxx (Florian Weimer)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: ralf@xxxxxxxxxxxxxx (Ralf Baechle)
• [RFC 6/6] ARC: Fix several testsuite failures related to unwinding
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 5/6] ARC: Enable __start as entry point vs. canonical _start
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 4/6] ARC: Initial port to glibc
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 3/6] ARC: add definitions to elf/elf.h
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 2/6] ARC: Fixed inline asm contraints to gcc 6.x
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 1/6] upstream: comment update
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [RFC 0/6] glibc port to ARC architecture
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• uclibc test suite with gnu 2017.03 (was Re: [Fwd: Re: nsim latest free version])
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• stdout-path (was Re: [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board)
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board
  • From: robh+dt@xxxxxxxxxx (Rob Herring)
• [PATCH 3/3 v6] ARC: hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/3 v6] ARC: Decouple linux kernel memory address and link address
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3 v6] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/3 v6] hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/1] futex: remove duplicated code and fix UB
  • From: will.deacon@xxxxxxx (Will Deacon)
• [PATCH 1/1] futex: remove duplicated code and fix UB
  • From: jslaby@xxxxxxx (Jiri Slaby)
• [PATCH] ARC: AXS: prepare dts files for enabling PAE40 on axs103
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• uclibc test suite with gnu 2017.03 (was Re: [Fwd: Re: nsim latest free version])
  • From: wbx@xxxxxxxxxxxxx (Waldemar Brodkorb)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: geert@xxxxxxxxxxxxxx (Geert Uytterhoeven)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: lkp@xxxxxxxxx (kbuild test robot)
• [PATCH 2/3] pci: Add a generic, weakly-linked pcibios_align_resource
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH 1/3] pci: Add a generic, weakly-linked pcibios_fixup_bus
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: rth@xxxxxxxxxxx (Richard Henderson)
• [PATCH 2/3] pci: Add a generic, weakly-linked pcibios_align_resource
  • From: geert@xxxxxxxxxxxxxx (Geert Uytterhoeven)
• [PATCH 1/3] pci: Add a generic, weakly-linked pcibios_fixup_bus
  • From: geert@xxxxxxxxxxxxxx (Geert Uytterhoeven)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: linux@xxxxxxxxxxxxxxx (Russell King - ARM Linux)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: linux@xxxxxxxxxxxxxxx (Russell King - ARM Linux)
• [PATCH 3/3] arc: kernel/pcibios.c is empty, delete it
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH 2/3] pci: Add a generic, weakly-linked pcibios_align_resource
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH 1/3] pci: Add a generic, weakly-linked pcibios_fixup_bus
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• pci: Add generic pcibios_{fixup_bus,align_resource}
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: james.hogan@xxxxxxxxxx (James Hogan)
• [PATCH] pci: Add and use PCI_GENERIC_SETUP Kconfig entry
  • From: palmer@xxxxxxxxxxx (Palmer Dabbelt)
• [PATCH 3/3 v5] ARC: hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 2/3 v5] ARC: Decouple linux kernel memory address and link address
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/3 v5] ARC: Set IO-coherency aperture base to LINUX_LINK_BASE
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 0/3 v5] hsdk: initial port for HSDK board
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/1] futex: remove duplicated code and fix UB
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCH 13/23] clocksource/drivers: Rename clocksource_probe to timer_probe
  • From: wens@xxxxxxxx (Chen-Yu Tsai)
• uclibc test suite with gnu 2017.03 (was Re: [Fwd: Re: nsim latest free version])
  • From: wbx@xxxxxxxxxxxxx (Waldemar Brodkorb)
• uclibc test suite with gnu 2017.03 (was Re: [Fwd: Re: nsim latest free version])
  • From: wbx@xxxxxxxxxxxxx (Waldemar Brodkorb)
• uclibc test suite with gnu 2017.03 (was Re: [Fwd: Re: nsim latest free version])
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 1/1] futex: remove duplicated code and fix UB
  • From: dvhart@xxxxxxxxxxxxx (Darren Hart)
• [PATCH v4] clk: axs10x: introduce AXS10X pll driver
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 1/1] futex: remove duplicated code and fix UB
  • From: jslaby@xxxxxxx (Jiri Slaby)
• [PATCH V10 1/3] irq: Allow to pass the IRQF_TIMER flag with percpu irq request
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH V10 1/3] irq: Allow to pass the IRQF_TIMER flag with percpu irq request
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCH V10 1/3] irq: Allow to pass the IRQF_TIMER flag with percpu irq request
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [PATCH V10 1/3] irq: Allow to pass the IRQF_TIMER flag with percpu irq request
  • From: tglx@xxxxxxxxxxxxx (Thomas Gleixner)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: james.hogan@xxxxxxxxxx (James Hogan)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: james.hogan@xxxxxxxxxx (James Hogan)
• [PATCH 3.10 141/268] ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup
  • From: w@xxxxxx (Willy Tarreau)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH] arc: implement DMA_ATTR_NO_KERNEL_MAPPING
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: implement DMA_ATTR_NO_KERNEL_MAPPING
  • From: hch@xxxxxx (Christoph Hellwig)
• [PATCH] Unexport LANG env variable
  • From: yamada.masahiro@xxxxxxxxxxxxx (Masahiro Yamada)
• [PATCH 13/23] clocksource/drivers: Rename clocksource_probe to timer_probe
  • From: matthias.bgg@xxxxxxxxx (Matthias Brugger)
• [PATCH v3 11/11] ARC: [plat-eznps] avoid toggling of DPC register
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 10/11] ARC: [plat-eznps] handle dedicated AUX registers
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 09/11] ARC: [plat-eznps] Save/Restore extra auxiliary registers
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 08/11] ARC: [plat-eznps] Update the init sequence of aux regs per cpu.
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 07/11] ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 06/11] ARC: [NUMA] added CONFIG_NUMA for plat-eznps
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 05/11] ARC: Support more than one PGDIR for KVADDR
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 04/11] ARC: Add CPU topology
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 03/11] ARC: Allow irq threading
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 02/11] ARC: send ipi to all cpus sharing task mm in case of page fault
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 01/11] ARC: set level of log per CPU during boot to be info level
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v3 00/11] plat-eznps upstream cont. set 2
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 08/12] ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 02/12] ARC: set level of log per CPU during boot to be debug level
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 01/12] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] Unexport LANG env variable
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] Unexport LANG env variable
  • From: mmarek@xxxxxxxx (Michal Marek)
• [PATCH] Unexport LANG env variable
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 13/23] clocksource/drivers: Rename clocksource_probe to timer_probe
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH 12/23] clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH v2 12/12] ARC: [plat-eznps] avoid toggling of DPC register
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 11/12] ARC: [plat-eznps] handle dedicated AUX registers
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 10/12] ARC: [plat-eznps] Save/Restore extra auxiliary registers
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 09/12] ARC: [plat-eznps] Update the init sequence of aux regs per cpu.
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 08/12] ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 07/12] ARC: [NUMA] added CONFIG_NUMA for plat-eznps
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 06/12] ARC: Support more than one PGDIR for KVADDR
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 05/12] ARC: Add CPU topology
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 04/12] ARC: Allow irq threading
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 03/12] ARC: send ipi to all cpus sharing task mm in case of page fault
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 02/12] ARC: set level of log per CPU during boot to be debug level
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 01/12] ARC: [plat-eznps] Handle memory error as an exception
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 00/12] plat-eznps upstream cont. set 2
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH V10 1/3] irq: Allow to pass the IRQF_TIMER flag with percpu irq request
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH 00/35] defconfig: Cleanup from old entries
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [PATCH 06/27] arc: move generic-y of exported headers to uapi/asm/Kbuild
  • From: yamada.masahiro@xxxxxxxxxxxxx (Masahiro Yamada)
• [PATCH 00/27] kbuild, arch: complete UAPI de-coupling and cleanup scripts/Makefile.headersinst
  • From: yamada.masahiro@xxxxxxxxxxxxx (Masahiro Yamada)
• [PATCH 00/35] defconfig: Cleanup from old entries
  • From: krzk@xxxxxxxxxx (Krzysztof Kozlowski)
• [PATCH 00/35] defconfig: Cleanup from old entries
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [RFC][PATCH] atomic: Fix atomic_set_release() for 'funny' architectures
  • From: peterz@xxxxxxxxxxxxx (Peter Zijlstra)
• [RFC][PATCH] atomic: Fix atomic_set_release() for 'funny' architectures
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 17/35] ARC: defconfig: Cleanup from old Kconfig options
  • From: krzk@xxxxxxxxxx (Krzysztof Kozlowski)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 17/35] ARC: defconfig: Cleanup from old Kconfig options
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 17/35] ARC: defconfig: Cleanup from old Kconfig options
  • From: krzk@xxxxxxxxxx (Krzysztof Kozlowski)
• [PATCH 00/35] defconfig: Cleanup from old entries
  • From: krzk@xxxxxxxxxx (Krzysztof Kozlowski)
• [RFC] arc: Decouple linux kernel memory address and link address
  • From: Eugeniy.Paltsev@xxxxxxxxxxxx (Eugeniy Paltsev)
• [PATCH 11/11] ARC: [plat-eznps] avoid toggling of DPC register
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 10/11] ARC: [plat-eznps] handle dedicated AUX registers
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 09/11] ARC: [plat-eznps] Save/Restore extra auxiliary registers
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 08/11] ARC: [plat-eznps] Update the init sequence of aux regs per cpu.
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 07/11] ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 06/11] ARC: [NUMA] added CONFIG_NUMA for plat-eznps
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 05/11] ARC: Support more than one PGDIR for KVADDR
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 04/11] ARC: Add CPU topology
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 03/11] ARC: Allow irq threading
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 02/11] ARC: send ipi to all cpus sharing task mm in case of page fault
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 01/11] ARC: set level of log per CPU during boot to be debug level
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 00/11] plat-eznps upstream cont. set 2
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH] arc: Remove sometimes misleading toolchain check
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Remove sometimes misleading toolchain check
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v4] hsdk: initial port for HSDK board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH 10/10] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v4] hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: james.hogan@xxxxxxxxxx (James Hogan)
• [PATCH 03/20] asm-generic: Drop getrlimit and setrlimit syscalls from default list
  • From: ynorov@xxxxxxxxxxxxxxxxxx (Yury Norov)
• [PATCH v2 08/11] ARC: [plat-eznps] spinlock aware for MTM
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: noamca@xxxxxxxxxxxx (Noam Camus)
• [PATCH v2 11/11] ARC: [plat-eznps] Handle memory error as an exception
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2 08/11] ARC: [plat-eznps] spinlock aware for MTM
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] hsdk: initial port for HSDK board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v3] clk/axs10x: introduce AXS10X pll driver
  • From: sboyd@xxxxxxxxxxxxxx (Stephen Boyd)
• git repo with Redpine changes
  • From: amitkarwar@xxxxxxxxx (amit karwar)
• [PATCH 06/10] ARC: [plat-eznps] Fix TLB Errata
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• git repo with Redpine changes
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• git repo with Redpine changes
  • From: amitkarwar@xxxxxxxxx (amit karwar)
• [PATCH v3] hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v2] hsdk: initial port for HSDK board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH v2] hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 3/7] clocksource: Rename clocksource_probe
  • From: james.hartley@xxxxxxxxxx (James Hartley)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: krzk@xxxxxxxxxx (Krzysztof Kozlowski)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: patrice.chotard@xxxxxx (Patrice CHOTARD)
• [PATCH] hsdk: initial port for HSDK board
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Add "include chroot" for DT bindings
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Add "include chroot" for DT bindings
  • From: robh+dt@xxxxxxxxxx (Rob Herring)
• [PATCH v2 02/11] ARC: send ipi to all cpus sharing task mm in case of page fault
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] arc: Add "include chroot" for DT bindings
  • From: Vineet.Gupta1@xxxxxxxxxxxx (Vineet Gupta)
• [PATCH] hsdk: initial port for HSDK board
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH] arc: Add "include chroot" for DT bindings
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH v2 07/11] ARC: [plat-eznps] disabled stall counter due to a HW bug
  • From: Alexey.Brodkin@xxxxxxxxxxxx (Alexey Brodkin)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: matthias.bgg@xxxxxxxxx (Matthias Brugger)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: arnd@xxxxxxxx (Arnd Bergmann)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: daniel.lezcano@xxxxxxxxxx (Daniel Lezcano)
• [PATCH 2/7] clocksource: Rename CLOCKSOURCE_OF_DECLARE
  • From: arnd@xxxxxxxx (Arnd Bergmann)