Get rid of core pll frequency set in platform code as we set it via
device tree using 'assigned-clock-rates' property.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
arch/arc/plat-hsdk/platform.c | 42 ------------------------------------------
1 file changed, 42 deletions(-)
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index fd0ae5e..2958aed 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -38,42 +38,6 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
#define CREG_PAE (CREG_BASE + 0x180)
#define CREG_PAE_UPDATE (CREG_BASE + 0x194)
-#define CREG_CORE_IF_CLK_DIV (CREG_BASE + 0x4B8)
-#define CREG_CORE_IF_CLK_DIV_2 0x1
-#define CGU_BASE ARC_PERIPHERAL_BASE
-#define CGU_PLL_STATUS (ARC_PERIPHERAL_BASE + 0x4)
-#define CGU_PLL_CTRL (ARC_PERIPHERAL_BASE + 0x0)
-#define CGU_PLL_STATUS_LOCK BIT(0)
-#define CGU_PLL_STATUS_ERR BIT(1)
-#define CGU_PLL_CTRL_1GHZ 0x3A10
-#define HSDK_PLL_LOCK_TIMEOUT 500
-
-#define HSDK_PLL_LOCKED() \
- !!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
-
-#define HSDK_PLL_ERR() \
- !!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
-
-static void __init hsdk_set_cpu_freq_1ghz(void)
-{
- u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
-
- /*
- * As we set cpu clock which exceeds 500MHz, the divider for the interface
- * clock must be programmed to div-by-2.
- */
- iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
-
- /* Set cpu clock to 1GHz */
- iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
-
- while (!HSDK_PLL_LOCKED() && timeout--)
- cpu_relax();
-
- if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
- pr_err("Failed to setup CPU frequency to 1GHz!");
-}
-
#define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xA000)
#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108)
#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30)
@@ -98,12 +62,6 @@ static void __init hsdk_init_early(void)
* minimum possible div-by-2.
*/
iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
-
- /*
- * Setup CPU frequency to 1GHz.
- * TODO: remove it after smart hsdk pll driver will be introduced.
- */
- hsdk_set_cpu_freq_1ghz();
}
static const char *hsdk_compat[] __initconst = {
--
2.9.3
