On 07/29/2017 03:37 AM, Alexandru Gagniuc wrote:
> Signed-off-by: Alexandru Gagniuc <alex.g at adaptrum.com>
> ---
> arch/arc/boot/dts/adaptrum_anarion.dtsi | 107 ++++++++++++++++++++++++++++
> arch/arc/boot/dts/adaptrum_anarion_fpga.dts | 49 +++++++++++++
> 2 files changed, 156 insertions(+)
> create mode 100644 arch/arc/boot/dts/adaptrum_anarion.dtsi
> create mode 100644 arch/arc/boot/dts/adaptrum_anarion_fpga.dts
So you really need to upstream the fpga dts - if this just for initial bringup and
you will eventually switch to silicon.
The reason I say is every additional file is a maintenance burden so better to
avoid things which are only temporary.
But if you plan to support this config in long run I'm fine !
Looking further it seems first one is a "common" include style dts while fpga is
for actual platform and the SoC one will follow once you get it running ?
>
> diff --git a/arch/arc/boot/dts/adaptrum_anarion.dtsi b/arch/arc/boot/dts/adaptrum_anarion.dtsi
> new file mode 100644
> index 0000000..f50958f
> --- /dev/null
> +++ b/arch/arc/boot/dts/adaptrum_anarion.dtsi
> @@ -0,0 +1,107 @@
> +/*
> + * (C) Copyright 2017 Adaptrum, Inc.
> + * Written by Alexandru Gagniuc <alex.g at adaptrum.com> for Adaptrum, Inc.
> + * Licensed under the GPLv2 or (at your option) any later version
> + */
> +
> +#include "skeleton.dtsi"
Perhaps put a one liner that this is based on SNPS ARC700 cpu !
> +
> +/ {
> + compatible = "adaptrum,anarion";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + soc {
> + compatible = "simple-bus";
> + device_type = "soc";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + interrupt-parent = <&core_intc>;
> +
> + core_intc: interrupt-controller {
> + compatible = "snps,arc700-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + uart0: serial at f2202100 {
> + compatible = "ns16550";
> + reg = <0xf2202100 0x20>;
> + interrupts = <8>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <192000000>;
> + status = "disabled";
> + };
> +
> + uart1: serial at f2202200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xf2202200 0x20>;
> + interrupts = <8>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <192000000>;
> + status = "disabled";
> + };
> +
> + uart2: serial at f2202300 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xf2202300 0x20>;
> + interrupts = <8>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <192000000>;
> + status = "disabled";
> + };
> +
> + uart3: serial at f2202400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0xf2202400 0x20>;
> + interrupts = <8>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <192000000>;
> + status = "disabled";
> + };
> +
> + qspi: qspi at f200f000 {
> + compatible = "adaptrum,anarion-qspi";
> + reg = <0xf200f000 0x1000>,
> + <0x20000000 0x08000000>;
> +
> + interrupts = <10>;
> + status = "disabled";
> + };
> +
> + gmac0: ethernet at f2010000 {
> + compatible = "snps,dwmac";
> + reg = <0xf2010000 0x4000>;
> +
> + interrupt-parent = <&core_intc>;
> + interrupts = <20>;
> + interrupt-names = "macirq";
> +
> + clocks = <&core_clk>;
> + clock-names = "stmmaceth";
> +
> + snps,pbl = <32>;
> + status = "disabled";
> + };
> +
> + gmac1: ethernet at f2014000 {
> + compatible = "adaptrum,anarion-gmac", "snps,dwmac";
> + reg = <0xf2014000 0x4000>, <0xf2018100 8>;
> +
> + interrupt-parent = <&core_intc>;
> + interrupts = <21>;
> + interrupt-names = "macirq";
> +
> + clocks = <&core_clk>;
> + clock-names = "stmmaceth";
> +
> + snps,pbl = <32>;
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/arch/arc/boot/dts/adaptrum_anarion_fpga.dts b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
> new file mode 100644
> index 0000000..36173b2
> --- /dev/null
> +++ b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
> @@ -0,0 +1,49 @@
> +/*
> + * (C) Copyright 2017 Adaptrum, Inc.
> + * Written by Alexandru Gagniuc <alex.g at adaptrum.com> for Adaptrum, Inc.
> + * Licensed under the GPLv2 or (at your option) any later version
> + */
> +
> +/dts-v1/;
> +
> +#include "adaptrum_anarion.dtsi"
> +
> +/ {
> + model = "adaptrum,anarion";
> + compatible = "adaptrum,anarion";
> +
> + chosen {
> + bootargs = "earlycon console=ttyS0,115200n8";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + core_clk: core_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <12000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&qspi {
> + status = "okay";
> + flash0: w25q128fvn at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "winbond,w25q128", "jedec,spi-nor";
> + spi-max-frequency = <70000000>;
> + m25p,fast-read;
> + };
> +};
> +
> +&gmac1 {
> + phy-mode = "rgmii";
> + status = "okay";
> +};
