On Fri, Jul 28, 2017 at 03:07:03PM -0700, Alexandru Gagniuc wrote: > Before the GMAC on the Anarion chip can be used, the PHY interface > selection must be configured with the DWMAC block in reset. > > This layer covers a block containing only two registers. Although it > is possible to model this as a reset controller and use the "resets" > property of stmmac, it's much more intuitive to include this in the > glue layer instead. > > At this time only RGMII is supported, because it is the only mode > which has been validated hardware-wise. > > Signed-off-by: Alexandru Gagniuc <alex.g at adaptrum.com> > --- > .../devicetree/bindings/net/anarion-gmac.txt | 25 ++++ The binding looks fine, but please split to separate patch. > drivers/net/ethernet/stmicro/stmmac/Kconfig | 9 ++ > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > .../net/ethernet/stmicro/stmmac/dwmac-anarion.c | 151 +++++++++++++++++++++ > 4 files changed, 186 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/anarion-gmac.txt > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
