Linux Serial
[Prev Page][Next Page]
- [tty:tty-testing] BUILD SUCCESS 58e49346672f738cf6eeb62009a5b0ae194374c4
- Re: [PATCH 0/3] serial: 8250_dw: Fix clk-notifier/port suspend deadlock
- Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup
- RE: [PATCH] tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
- [PATCH] tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
- [PATCH -next] serial: mvebu-uart: fix unused variable warning
- [PATCH V2] tty: serial: lpuart: fix lpuart32_write usage
- Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup
- Re: [PATCH AUTOSEL 4.4 42/64] serial: uartps: Wait for tx_empty in console setup
- Re: [PATCH AUTOSEL 4.4 42/64] serial: uartps: Wait for tx_empty in console setup
- Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup
- Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup
- [PATCH v3] serial: 8250_fsl: Fix TX interrupt handling condition
- Re: [PATCH] dt-bindings: serial: fsl-imx-uart: fix i.MX 53 and 6 compatible matching
- Re: [PATCH v2 1/1] serial: 8250_fsl: Fix TX interrupt handling condition
- [PATCH v2 1/1] serial: 8250_fsl: Fix TX interrupt handling condition
- [PATCH v2 0/1] serial: 8250_fsl: Fix TX interrupt handling condition
- Re: [PATCH V5] serial: qcom_geni_serial: To correct QUP Version detection logic
- [PATCH V5] serial: qcom_geni_serial: To correct QUP Version detection logic
- [PATCH] tty: serial: lpuart: fix lpuart32_write usage
- [tty:tty-testing] BUILD SUCCESS 988d0763361bb65690d60e2bc53a6b72777040c3
- Re: [PATCH 0/3] serial: 8250_dw: Fix clk-notifier/port suspend deadlock
- Re: [PATCH 1/1] serial: 8250: Fix TX interrupt handling condition in 8250_fsl.c
- Re: [PATCH 1/8] dt-bindings: serial: renesas,scif: Document r8a774e1 bindings
- Re: [PATCH 01/14] pch_uart: drop double zeroing
- [PATCH] dt-bindings: serial: fsl-imx-uart: fix i.MX 53 and 6 compatible matching
- From: Krzysztof Kozlowski
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [PATCH v11 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [PATCH v11 5/5] drivers/tty/serial: add LiteUART driver
- Re: [PATCH v11 4/5] dt-bindings: serial: document LiteUART bindings
- Re: [PATCH v11 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [PATCH v11 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
- [PATCH] tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 1/9] misc: Add Surface Aggregator subsystem
- Re: [PATCH -next] serial: pmac_zilog: use for_each_child_of_node() macro
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 1/9] misc: Add Surface Aggregator subsystem
- Re: [RFC PATCH 4/9] surface_aggregator: Add trace points
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 5/9] surface_aggregator: Add error injection capabilities
- Re: [RFC PATCH 1/9] misc: Add Surface Aggregator subsystem
- Re: [RFC PATCH 4/9] surface_aggregator: Add trace points
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 5/9] surface_aggregator: Add error injection capabilities
- Re: [RFC PATCH 1/9] misc: Add Surface Aggregator subsystem
- [PATCH 3/3] serial: 8250_dw: Fix clk-notifier/port suspend deadlock
- [PATCH 0/3] serial: 8250_dw: Fix clk-notifier/port suspend deadlock
- [PATCH 2/3] serial: 8250: Skip uninitialized TTY port baud rate update
- [PATCH 1/3] serial: 8250: Discard RTS/DTS setting from clock update method
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [PATCH 00/14] drop double zeroing
- Re: [PATCH 00/14] drop double zeroing
- [RFC PATCH 7/9] docs: driver-api: Add Surface Aggregator subsystem documentation
- [RFC PATCH 5/9] surface_aggregator: Add error injection capabilities
- [RFC PATCH 3/9] surface_aggregator: Add event item allocation chaching
- [RFC PATCH 4/9] surface_aggregator: Add trace points
- [RFC PATCH 2/9] surface_aggregator: Add control packet allocation chaching
- [RFC PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
- Re: [PATCH v3 06/19] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- Re: [PATCH v3 06/19] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- Re: [PATCH v11 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [PATCH v3 06/19] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- [PATCH v11 5/5] drivers/tty/serial: add LiteUART driver
- [PATCH v11 4/5] dt-bindings: serial: document LiteUART bindings
- [PATCH v11 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- [PATCH v11 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
- [PATCH v11 1/5] dt-bindings: vendor: add vendor prefix for LiteX
- [PATCH v11 0/5] LiteX SoC controller and LiteUART serial driver
- Re: lockdep warning in 5.9 caused by "serial: 8250_dw: Fix common clocks usage race condition"
- Re: lockdep warning in 5.9 caused by "serial: 8250_dw: Fix common clocks usage race condition"
- [tty:tty-testing] BUILD SUCCESS 79d924e92fb02ae64158d9e6206832a294d3aab4
- Re: [PATCH 00/14] drop double zeroing
- [PATCH -next] serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
- [PATCH 1/1] serial: 8250: Fix TX interrupt handling condition in 8250_fsl.c
- [PATCH 0/1] serial: 8250: Fix TX interrupt handling condition in 8250_fsl.c
- Re: [GIT PULL] TTY/Serial driver fixes for 5.9-rc6
- [GIT PULL] TTY/Serial driver fixes for 5.9-rc6
- Re: [PATCH 01/14] pch_uart: drop double zeroing
- [PATCH 01/14] pch_uart: drop double zeroing
- [PATCH 00/14] drop double zeroing
- Re: [PATCH 01/14] pch_uart: drop double zeroing
- Re: [PATCH v3 07/14] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- From: Krzysztof Kozlowski
- Re: [PATCH v3 07/14] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- Re: [PATCH 2/8] dt-bindings: serial: renesas,hscif: Document r8a774e1 bindings
- Re: [PATCH 1/8] dt-bindings: serial: renesas,scif: Document r8a774e1 bindings
- [PATCH -next v2] tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
- Re: [PATCH -next] tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
- Re: [PATCH -next] tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
- Re: Edgeport/4 Compatibility Re: your mail
- Re: [PATCH -next] tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
- Re: [PATCH v2 1/2] tty: serial: print earlycon info after match->setup
- [PATCH -next] tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
- Re: your mail
- Re: [PATCH 2/2] serial: core: fix console port-lock regression
- [PATCH AUTOSEL 5.4 170/330] tty: sifive: Finish transmission before changing the clock
- [PATCH AUTOSEL 5.4 190/330] serial: 8250_port: Don't service RX FIFO if throttled
- [PATCH AUTOSEL 5.4 192/330] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout
- [PATCH AUTOSEL 5.4 191/330] serial: 8250_omap: Fix sleeping function called from invalid context during probe
- [PATCH AUTOSEL 4.19 120/206] serial: 8250_port: Don't service RX FIFO if throttled
- [PATCH AUTOSEL 4.19 121/206] serial: 8250_omap: Fix sleeping function called from invalid context during probe
- [PATCH AUTOSEL 4.19 122/206] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout
- [PATCH AUTOSEL 4.19 163/206] tty: serial: samsung: Correct clock selection logic
- [PATCH AUTOSEL 4.14 069/127] serial: 8250_port: Don't service RX FIFO if throttled
- [PATCH AUTOSEL 4.14 086/127] serial: uartps: Wait for tx_empty in console setup
- [PATCH AUTOSEL 4.14 100/127] tty: serial: samsung: Correct clock selection logic
- [PATCH AUTOSEL 4.9 54/90] serial: 8250_omap: Fix sleeping function called from invalid context during probe
- [PATCH AUTOSEL 4.9 53/90] serial: 8250_port: Don't service RX FIFO if throttled
- [PATCH AUTOSEL 4.9 55/90] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout
- [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup
- [PATCH AUTOSEL 4.4 42/64] serial: uartps: Wait for tx_empty in console setup
- [PATCH AUTOSEL 4.4 36/64] serial: 8250_omap: Fix sleeping function called from invalid context during probe
- [PATCH AUTOSEL 4.4 51/64] tty: serial: samsung: Correct clock selection logic
- [PATCH AUTOSEL 4.9 73/90] tty: serial: samsung: Correct clock selection logic
- [PATCH AUTOSEL 4.14 070/127] serial: 8250_omap: Fix sleeping function called from invalid context during probe
- [PATCH AUTOSEL 4.14 071/127] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout
- [PATCH AUTOSEL 4.19 143/206] serial: uartps: Wait for tx_empty in console setup
- [PATCH AUTOSEL 5.4 266/330] tty: serial: samsung: Correct clock selection logic
- [PATCH AUTOSEL 5.4 236/330] serial: uartps: Wait for tx_empty in console setup
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [oss-drivers] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- [tty:tty-testing] BUILD SUCCESS 23f87274f0ad4a9167de23a330ed88966634fdf6
- [tty:tty-linus] BUILD SUCCESS ec0972adecb391a8d8650832263a4790f3bfb4df
- Re: [PATCH V7] GCOV: Add config to check the preqequisites situation
- Re: [PATCH V4] serial: qcom_geni_serial: To correct QUP Version detection logic
- Re: [PATCH 2/2] serial: core: fix console port-lock regression
- [PATCH -next] serial: pmac_zilog: use for_each_child_of_node() macro
- Re: [PATCH v10 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [PATCH V4] serial: qcom_geni_serial: To correct QUP Version detection logic
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [Intel-gfx] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- [PATCH v2 2/2] tty: serial: 8250_mtk: set regshift for mmio32
- [PATCH v2 1/2] tty: serial: print earlycon info after match->setup
- Re: [PATCH v3 00/14] dt-bindings: Cleanup of i.MX 8
- PATCH: serial: 8250_pci: Add Realtek 816a and 816b
- Re: [PATCH 1/2] tty: serial: print earlycon info after match->setup
- Re: [PATCH 1/2] tty: serial: print earlycon info after match->setup
- Re: [PATCH] tty: serial: qcom_geni_serial: 115.2 is a better console default than 9600
- Re: [PATCH v10 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [PATCH v10 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [PATCH] tty: serial: qcom_geni_serial: 115.2 is a better console default than 9600
- Re: [PATCH 2/2] serial: core: fix console port-lock regression
- Re: lockdep warning in 5.9 caused by "serial: 8250_dw: Fix common clocks usage race condition"
- [PATCH V4] serial: qcom_geni_serial: To correct QUP Version detection logic
- Re: [PATCH] serial: ucc_uart: make qe_uart_set_mctrl() static
- [PATCH] serial: ucc_uart: make qe_uart_set_mctrl() static
- lockdep warning in 5.9 caused by "serial: 8250_dw: Fix common clocks usage race condition"
- [PATCH] tty: serial: qcom_geni_serial: 115.2 is a better console default than 9600
- Re: [PATCH] tty: serial: qcom_geni_serial: 115.2 is a better console default than 9600
- [PATCH 2/2] tty: serial: 8250_mtk: set regshift for mmio32
- [PATCH 1/2] tty: serial: print earlycon info after match->setup
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [PATCH v10 0/5] LiteX SoC controller and LiteUART serial driver
- Re: [PATCH v10 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- Re: [PATCH 2/2] serial: core: fix console port-lock regression
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [PATCH v3 12/14] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
- From: Krzysztof Kozlowski
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [PATCH 2/2] serial: core: fix console port-lock regression
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [PATCH 2/2] serial: core: fix console port-lock regression
- Re: [PATCH 1/2] serial: core: fix port-lock initialisation
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- From: Mauro Carvalho Chehab
- Re: [PATCH] serial: qcom_geni_serial: To correct QUP Version detection logic
- Re: [PATCHv2 1/2] dt-bindings: xilinx-uartps: Add support for noctsrts
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- From: Gustavo A. R. Silva
- [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
- Re: [PATCH V2 0/8] opp: Unconditionally call dev_pm_opp_of_remove_table()
- [PATCH 2/2] serial: core: fix console port-lock regression
- [PATCH 1/2] serial: core: fix port-lock initialisation
- [PATCH 0/2] serial: core: fix console port-lock regression
- [PATCH -next] serial: 8250_pci: Remove unused function get_pci_irq()
- Re: [PATCH 00/12] Convert WAR defines to config options
- From: Thomas Bogendoerfer
- Re: [PATCH V2 0/8] opp: Unconditionally call dev_pm_opp_of_remove_table()
- [PATCH 5.8 006/186] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- [PATCH 4.19 06/88] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- [PATCH 5.4 003/129] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- Re: [PATCH v3 12/14] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
- Re: [PATCH v3 12/14] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
- From: Krzysztof Kozlowski
- [tty:tty-testing] BUILD SUCCESS 71a174b39f10b4b93223d374722aa894b5d8a82e
- Re: [PATCH v3 12/14] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
- Re: [PATCH v3 13/14] dt-bindings: mtd: nand-controller: Fix matching with size-cells==1
- [PATCH v3 00/14] dt-bindings: Cleanup of i.MX 8
- From: Krzysztof Kozlowski
- [PATCH v3 03/14] dt-bindings: serial: fsl-imx-uart: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 02/14] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 06/14] dt-bindings: reset: fsl,imx7-src: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 11/14] dt-bindings: mtd: gpmi-nand: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 09/14] dt-bindings: mfd: rohm,bd71847-pmic: Correct clock properties requirements
- From: Krzysztof Kozlowski
- [PATCH v3 12/14] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
- From: Krzysztof Kozlowski
- [PATCH v3 13/14] dt-bindings: mtd: nand-controller: Fix matching with size-cells==1
- From: Krzysztof Kozlowski
- [PATCH v3 14/14] dt-bindings: clock: imx8m: Integrate duplicated i.MX 8M schemas
- From: Krzysztof Kozlowski
- [PATCH v3 10/14] dt-bindings: interrupt-controller: fsl,irqsteer: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH v3 08/14] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 07/14] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- From: Krzysztof Kozlowski
- [PATCH v3 05/14] dt-bindings: watchdog: fsl-imx-wdt: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 04/14] dt-bindings: serial: fsl-lpuart: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH v3 01/14] dt-bindings: perf: fsl-imx-ddr: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- Re: [PATCH v2] serial: imx: Delete duplicated argument to '|' in imx_uart_probe
- [no subject]
- RE: [EXT] [PATCH v3] serial: 8250_fsl: Add ACPI support
- [PATCH v4] serial: 8250_fsl: Add ACPI support
- Re: [PATCH v2] serial: imx: Delete duplicated argument to '|' in imx_uart_probe
- Re: [PATCH v2 05/10] dt-bindings: renesas,rcar-dmac: Document r8a7742 support
- [PATCH v2] serial: imx: Delete duplicated argument to '|' in imx_uart_probe
- Re: [PATCH] serial: imx: Delete duplicated argument to | in imx_uart_probe
- [PATCH] serial: imx: Delete duplicated argument to | in imx_uart_probe
- RE: [EXT] [PATCH v3] serial: 8250_fsl: Add ACPI support
- From: Vabhav Sharma (OSS)
- Re: [PATCH V3] serial: stm32: Add RS485 RTS GPIO control again
- Re: [PATCH 1/2] serial: 8250: Simplify with dev_err_probe()
- Re: [PATCH 2/2] serial: core: Simplify with dev_err_probe()
- Re: [PATCH V3] serial: stm32: Add RS485 RTS GPIO control again
- Re: [PATCH] serial: qcom_geni_serial: To correct QUP Version detection logic
- [PATCH] serial: qcom_geni_serial: To correct QUP Version detection logic
- [PATCH 1/2] serial: 8250: Simplify with dev_err_probe()
- From: Krzysztof Kozlowski
- Re: [PATCH 1/2] serial: 8250: Simplify with dev_err_probe()
- [PATCH 2/2] serial: core: Simplify with dev_err_probe()
- From: Krzysztof Kozlowski
- [PATCH] sc16is7xx: Set iobase to device index
- [tty:tty-testing] BUILD SUCCESS 8f49a2fe8e6bccbd47555048def9cd08da220c74
- [PATCH V3] serial: stm32: Add RS485 RTS GPIO control again
- [PATCH AUTOSEL 5.8 08/42] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- [PATCH AUTOSEL 5.4 05/23] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- [PATCH AUTOSEL 4.19 03/11] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- Re: [PATCH V2 0/8] opp: Unconditionally call dev_pm_opp_of_remove_table()
- Re: [PATCH v3 19/19] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs
- Re: [PATCH v3 18/19] arm64: dts: imx8mq-evk: Add hog suffix to wl-reg-on
- Re: [PATCH v3 15/19] dt-bindings: arm: fsl: Add ZII Ultra boards binding
- Re: [PATCH v3 14/19] dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
- [PATCH v3] serial: 8250_fsl: Add ACPI support
- RE: [PATCH v2] serial: 8250_fsl: Add ACPI support
- Re: [PATCH v3 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- From: Krzysztof Kozlowski
- Re: [PATCH v3 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- Re: [PATCH v3 17/19] dt-bindings: serial: fsl-lpuart: Fix compatible matching
- Re: [PATCH v3 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- [tty:tty-testing] BUILD SUCCESS 04b6ff5f25dece9b0ee244aa768b251cfe855c85
- Re: [PATCH v3 00/19] dt-bindings / arm64: Cleanup of i.MX 8 bindings
- Re: [PATCH v3 00/19] dt-bindings / arm64: Cleanup of i.MX 8 bindings
- From: Krzysztof Kozlowski
- Re: [PATCH v3 00/19] dt-bindings / arm64: Cleanup of i.MX 8 bindings
- Re: [PATCH v4] tty: serial: earlycon dependency
- [PATCH v5] tty: serial: earlycon dependency
- Re: [PATCH 01/22] dt-bindings: gpio: fsl-imx-gpio: Add i.MX 8 compatibles
- Re: [PATCH v3 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- From: Krzysztof Kozlowski
- Re: [RFC PATCH kernel] serial_core: Check for port state when tty is in error state
- Re: [PATCH v3 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- Re: [PATCH v4] tty: serial: earlycon dependency
- Re: [PATCH V2] serial: qcom_geni_serial: To correct QUP Version detection logic
- Re: [PATCH v10 5/5] drivers/tty/serial: add LiteUART driver
- Re: [PATCH v2] serial: 8250_fsl: Add ACPI support
- [PATCH V2 7/8] tty: serial: qcom_geni_serial: Unconditionally call dev_pm_opp_of_remove_table()
- [PATCH V2 0/8] opp: Unconditionally call dev_pm_opp_of_remove_table()
- Re: [PATCH v2 05/10] dt-bindings: renesas,rcar-dmac: Document r8a7742 support
- Re: [GIT PULL] TTY/Serial driver fixes for 5.9-rc3
- [GIT PULL] TTY/Serial driver fixes for 5.9-rc3
- Re: [PATCH 2/4] tty: atmel_serial: convert tasklets to use new tasklet_setup() API
- [tty:tty-testing] BUILD SUCCESS 52c3c3a59234a9725b5dcfe9729ed737d7843980
- Re: [PATCH v3 08/19] dt-bindings: watchdog: fsl-imx-wdt: Add i.MX 8M compatibles
- Re: [PATCH 2/2] tty: pl011: Add support for xilinx uart
- Re: [PATCH 1/2] bindings: serial: Add xilinx compatible
- [PATCH v3 19/19] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs
- From: Krzysztof Kozlowski
- [PATCH v3 18/19] arm64: dts: imx8mq-evk: Add hog suffix to wl-reg-on
- From: Krzysztof Kozlowski
- [PATCH v3 17/19] dt-bindings: serial: fsl-lpuart: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH v3 16/19] dt-bindings: interrupt-controller: fsl,irqsteer: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH v3 15/19] dt-bindings: arm: fsl: Add ZII Ultra boards binding
- From: Krzysztof Kozlowski
- [PATCH v3 14/19] dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
- From: Krzysztof Kozlowski
- [PATCH v3 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- From: Krzysztof Kozlowski
- [PATCH v3 11/19] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- From: Krzysztof Kozlowski
- [PATCH v3 10/19] dt-bindings: reset: fsl,imx7-src: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 09/19] dt-bindings: mtd: gpmi-nand: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 08/19] dt-bindings: watchdog: fsl-imx-wdt: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 07/19] dt-bindings: serial: fsl-imx-uart: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 06/19] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 05/19] dt-bindings: perf: fsl-imx-ddr: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 04/19] dt-bindings: gpio: fsl-imx-gpio: Add power-domains
- From: Krzysztof Kozlowski
- [PATCH v3 03/19] dt-bindings: gpio: fsl-imx-gpio: Add parsing of hogs
- From: Krzysztof Kozlowski
- [PATCH v3 02/19] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- From: Krzysztof Kozlowski
- [PATCH v3 01/19] dt-bindings: gpio: fsl-imx-gpio: Add i.MX 8 compatibles
- From: Krzysztof Kozlowski
- [PATCH v3 00/19] dt-bindings / arm64: Cleanup of i.MX 8 bindings
- From: Krzysztof Kozlowski
- Re: [PATCH 15/16] vc_screen: extract vcs_read_buf_header
- Re: [PATCH 15/16] vc_screen: extract vcs_read_buf_header
- Re: [PATCH 15/16] vc_screen: extract vcs_read_buf_header
- [PATCH v2] serial: 8250_fsl: Add ACPI support
- Re: [PATCH v2 17/19] dt-bindings: serial: fsl-lpuart: Fix compatible matching
- From: Krzysztof Kozlowski
- Re: [PATCH v2 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- From: Krzysztof Kozlowski
- Re: [PATCH v2 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- From: Krzysztof Kozlowski
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [PATCH v2 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- From: Krzysztof Kozlowski
- Re: [PATCH v2 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- Re: [PATCH v2 17/19] dt-bindings: serial: fsl-lpuart: Fix compatible matching
- Re: [PATCH v2 03/19] dt-bindings: gpio: fsl-imx-gpio: Add parsing of hogs
- Re: [PATCH v2 16/19] dt-bindings: interrupt-controller: fsl, irqsteer: Fix compatible matching
- Re: [PATCH v2 15/19] dt-bindings: arm: fsl: Add ZII Ultra boards binding
- Re: [PATCH v2 14/19] dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
- Re: [PATCH v2 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- Re: [PATCH v2 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- Re: [PATCH v2 11/19] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- Re: [PATCH v2 10/19] dt-bindings: reset: fsl, imx7-src: Add i.MX 8M compatibles
- Re: [PATCH v2 09/19] dt-bindings: mtd: gpmi-nand: Add i.MX 8M compatibles
- Re: [PATCH v2 08/19] dt-bindings: watchdog: fsl-imx-wdt: Add i.MX 8M compatibles
- Re: [PATCH v2 07/19] dt-bindings: serial: fsl-imx-uart: Add i.MX 8M compatibles
- Re: [PATCH v2 06/19] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- Re: [PATCH v2 05/19] dt-bindings: perf: fsl-imx-ddr: Add i.MX 8M compatibles
- Re: [PATCH v2 04/19] dt-bindings: gpio: fsl-imx-gpio: Add power-domains
- Re: [PATCH v2 03/19] dt-bindings: gpio: fsl-imx-gpio: Add parsing of hogs
- Re: [PATCH v2 02/19] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- Re: [PATCH v2 01/19] dt-bindings: gpio: fsl-imx-gpio: Add i.MX 8 compatibles
- [PATCH] serial: core: don't use snprintf() for formatting sysfs attrs
- Re: [PATCH 00/12] Convert WAR defines to config options
- [PATCH v2 03/19] dt-bindings: gpio: fsl-imx-gpio: Add parsing of hogs
- From: Krzysztof Kozlowski
- [PATCH v2 06/19] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 00/12] Convert WAR defines to config options
- From: Thomas Bogendoerfer
- Re: [PATCH 00/12] Convert WAR defines to config options
- From: Thomas Bogendoerfer
- Re: [PATCH 00/12] Convert WAR defines to config options
- [PATCH 09/12] MIPS: Replace SIBYTE_1956_WAR by CONFIG_SB1_PASS_2_WORKAROUNDS
- From: Thomas Bogendoerfer
- [PATCH v2 05/19] dt-bindings: perf: fsl-imx-ddr: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v2 07/19] dt-bindings: serial: fsl-imx-uart: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v2 09/19] dt-bindings: mtd: gpmi-nand: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v2 13/19] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v2 10/19] dt-bindings: reset: fsl,imx7-src: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v2 11/19] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- From: Krzysztof Kozlowski
- [PATCH v2 15/19] dt-bindings: arm: fsl: Add ZII Ultra boards binding
- From: Krzysztof Kozlowski
- [PATCH v2 14/19] dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
- From: Krzysztof Kozlowski
- [PATCH v2 18/19] arm64: dts: imx8mq-evk: Add hog suffix to wl-reg-on
- From: Krzysztof Kozlowski
- [PATCH v2 16/19] dt-bindings: interrupt-controller: fsl,irqsteer: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH v2 17/19] dt-bindings: serial: fsl-lpuart: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH v2 19/19] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs
- From: Krzysztof Kozlowski
- [PATCH v2 12/19] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching
- From: Krzysztof Kozlowski
- [PATCH v2 08/19] dt-bindings: watchdog: fsl-imx-wdt: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH v2 04/19] dt-bindings: gpio: fsl-imx-gpio: Add power-domains
- From: Krzysztof Kozlowski
- [PATCH v2 02/19] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- From: Krzysztof Kozlowski
- [PATCH v2 01/19] dt-bindings: gpio: fsl-imx-gpio: Add i.MX 8 compatibles
- From: Krzysztof Kozlowski
- Re: [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- Re: [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- From: Krzysztof Kozlowski
- RE: [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- Re: [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- Re: [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- From: Krzysztof Kozlowski
- RE: [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- Re: [PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- From: Krzysztof Kozlowski
- Re: [PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- Re: [PATCH 07/22] dt-bindings: serial: fsl-imx-uart: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- Re: [PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- From: Krzysztof Kozlowski
- Re: [PATCH 07/22] dt-bindings: serial: fsl-imx-uart: imx-pwm: Add i.MX 8M compatibles
- Re: [PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- [PATCH 04/22] dt-bindings: gpio: fsl-imx-gpio: Add power-domains
- From: Krzysztof Kozlowski
- [PATCH 08/22] dt-bindings: watchdog: fsl-imx-wdt: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 07/22] dt-bindings: serial: fsl-imx-uart: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 09/22] dt-bindings: mtd: gpmi-nand: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 12/22] dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8M compatible matching
- From: Krzysztof Kozlowski
- [PATCH 10/22] dt-bindings: reset: fsl,imx7-src: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 13/22] dt-bindings: nvmem: imx-ocotp: Update i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 15/22] dt-bindings: arm: fsl: Add ZII Ultra boards binding
- From: Krzysztof Kozlowski
- [PATCH 20/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from UART
- From: Krzysztof Kozlowski
- [PATCH 21/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from USDHC
- From: Krzysztof Kozlowski
- [PATCH 17/22] arm64: dts: imx8mq-evk: Add hog suffix to wl-reg-on
- From: Krzysztof Kozlowski
- [PATCH 22/22] arm64: dts: imx8mp: Remove i.MX7 compatible from DDR PMU
- From: Krzysztof Kozlowski
- [PATCH 18/22] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs
- From: Krzysztof Kozlowski
- [PATCH 19/22] arm64: dts: imx8mm: Remove i.MX7 compatible from USDHC
- From: Krzysztof Kozlowski
- [PATCH 16/22] dt-bindings: interrupt-controller: fsl,irqsteer: Fix compatible matching
- From: Krzysztof Kozlowski
- [PATCH 14/22] dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
- From: Krzysztof Kozlowski
- [PATCH 11/22] dt-bindings: thermal: imx8mm-thermal: Add i.MX 8M Nano compatible
- From: Krzysztof Kozlowski
- [PATCH 06/22] dt-bindings: pwm: imx-pwm: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 05/22] dt-bindings: perf: fsl-imx-ddr: Add i.MX 8M compatibles
- From: Krzysztof Kozlowski
- [PATCH 03/22] dt-bindings: gpio: fsl-imx-gpio: Add parsing of hogs
- From: Krzysztof Kozlowski
- [PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property
- From: Krzysztof Kozlowski
- [PATCH 01/22] dt-bindings: gpio: fsl-imx-gpio: Add i.MX 8 compatibles
- From: Krzysztof Kozlowski
- [PATCH] serial: 8250_pci: Add WCH384_8S 8 port serial device
- [PATCH] serial: 8250_pci: Add WCH384_8S 8 port serial device
- RE: [PATCH] serial: 8250_fsl: Add ACPI support
- Re: [PATCH V7] GCOV: Add config to check the preqequisites situation
- [PATCH 0/8] opp: Unconditionally call dev_pm_opp_of_remove_table()
- Re: [PATCH v6 1/6] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
- [PATCH 7/8] tty: serial: qcom_geni_serial: Unconditionally call dev_pm_opp_of_remove_table()
- [tty:tty-testing] BUILD SUCCESS 377c0d7ea5bb93251e71559c115d2f94650c00d6
- [PATCH 1/2] bindings: serial: Add xilinx compatible
- [PATCH 2/2] tty: pl011: Add support for xilinx uart
- [PATCH 1/2] bindings: serial: Add xilinx compatible
- Re: [PATCH] serial: 8250_fsl: Add ACPI support
- [PATCH] serial: 8250_fsl: Add ACPI support
- Re: [PATCHv2] serial: 8250: change lock order in serial8250_do_startup()
- Re: [PATCHv2] serial: 8250: change lock order in serial8250_do_startup()
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [PATCHv2] serial: 8250: change lock order in serial8250_do_startup()
- Re: [PATCH 02/16] vt: declare xy for get/putconsxy properly
- Re: [PATCH] serial: pl011: Don't leak amba_ports entry on driver register error
- Re: [PATCH] n_gsm: Fix write handling for zero bytes written
- Re: [PATCH] n_gsm: Fix write handling for zero bytes written
- Re: [tty:tty-testing 30/32] arch/arm64/boot/dts/mediatek/mt8192.dtsi:8:10: fatal error: dt-bindings/clock/mt8192-clk.h: No such file or directory
- [tty:tty-testing 30/32] arch/arm64/boot/dts/mediatek/mt8192.dtsi:8:10: fatal error: dt-bindings/clock/mt8192-clk.h: No such file or directory
- [tty:tty-linus] BUILD SUCCESS ea1fc02e12b647d8dd7515d1dba137847d8e951d
- [tty:tty-testing] BUILD SUCCESS 831b6a948800e27475276c331624defb6b084545
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- [PATCH] serial: fsl_lpuart: Fix typo in "transfer"
- [PATCH v4] tty: serial: earlycon dependency
- [PATCH v3] tty: serial: earlycon dependency
- Re: [PATCH v2] Fixes: tty: serial: earlycon dependency
- Re: [PATCH V3 3/5] dt-bindings: serial: Convert i.MX uart to json-schema
- Re: [PATCH V3 5/5] dt-bindings: serial: Convert NXP lpuart to json-schema
- Re: [PATCH V3 4/5] dt-bindings: serial: Convert MXS auart to json-schema
- Re: [PATCH V3 2/5] dt-bindings: clock: Update i.MX23 example
- Re: [PATCH V3 1/5] dt-bindings: clock: Update i.MX28 example
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [PATCH 1/8] tty: n_gsm, eliminate indirection for gsm->{output,error}()
- Re: [PATCH 02/16] vt: declare xy for get/putconsxy properly
- Re: [PATCH v1 2/2] serial: 8250: Explicitly show we initialise ISA ports only once
- Re: [PATCH v2] Fixes: tty: serial: earlycon dependency
- Re: [PATCH] n_gsm: Fix write handling for zero bytes written
- Re: [PATCH] n_gsm: Fix write handling for zero bytes written
- Re: [PATCH] n_gsm: Fix write handling for zero bytes written
- [PATCH 4/8] tty: fix kernel-doc
- [PATCH 2/8] newport_con: fix no return statement in newport_show_logo
- [PATCH 6/8] tty: vt, fix kernel-doc
- [PATCH 8/8] tty: serial, fix kernel-doc
- [PATCH 3/8] newport_con: make module's init & exit static using module_driver
- [PATCH 01/16] vt: make vc_data pointers const in selection.h
- [PATCH 05/16] vc_screen: rewrite vcs_size to accept vc, not inode
- [PATCH 04/16] vc_screen: document and cleanup vcs_vc
- [PATCH 07/16] vc_screen: extract vcs_write_buf_noattr
- [PATCH 06/16] vc_screen: sanitize types in vcs_write
- [PATCH 08/16] vc_screen: extract vcs_write_buf
- [PATCH 02/16] vt: declare xy for get/putconsxy properly
- [PATCH 11/16] vs_screen: kill tmp_count from vcs_read
- [PATCH 12/16] vc_screen: extract vcs_read_buf_uni
- [PATCH 15/16] vc_screen: extract vcs_read_buf_header
- [PATCH 16/16] vc_screen: prune macros
- [PATCH 14/16] vc_screen: extract vcs_read_buf
- [PATCH 10/16] vc_screen: sanitize types in vcs_read
- [PATCH 09/16] vc_screen: eliminate ifdefs from vcs_write_buf
- [PATCH 13/16] vc_screen: extract vcs_read_buf_noattr
- [PATCH 7/8] tty: synclink, fix kernel-doc
- [PATCH 03/16] vc: propagate "viewed as bool" from screenpos up
- [PATCH 5/8] tty: ldiscs, fix kernel-doc
- [PATCH 1/8] tty: n_gsm, eliminate indirection for gsm->{output,error}()
- Re: [PATCH] n_gsm: Fix write handling for zero bytes written
- Re: [PATCH v2] Fixes: tty: serial: earlycon dependency
- [PATCH V3 3/5] dt-bindings: serial: Convert i.MX uart to json-schema
- [PATCH V3 5/5] dt-bindings: serial: Convert NXP lpuart to json-schema
- [PATCH V3 4/5] dt-bindings: serial: Convert MXS auart to json-schema
- [PATCH V3 2/5] dt-bindings: clock: Update i.MX23 example
- [PATCH V3 1/5] dt-bindings: clock: Update i.MX28 example
- RE: [PATCH V2 4/5] dt-bindings: serial: Convert MXS auart to json-schema
- Re: [PATCH V2 4/5] dt-bindings: serial: Convert MXS auart to json-schema
- [PATCH v2] Fixes: tty: serial: earlycon dependency
- [PATCH v2] Fixes: tty: serial: earlycon dependency
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH] tty: serial: fix earlycon dependency
- Re: [PATCH] tty: serial: fix earlycon dependency
- [PATCH] tty: serial: fix earlycon dependency
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- [PATCH] n_gsm: Fix write handling for zero bytes written
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- [PATCH 4/4] tty: timbuart: convert tasklets to use new tasklet_setup() API
- [PATCH 3/4] tty: ifx6x60: convert tasklets to use new tasklet_setup() API
- [PATCH 2/4] tty: atmel_serial: convert tasklets to use new tasklet_setup() API
- [PATCH 1/4] tty: ipwireless: convert tasklets to use new tasklet_setup() API
- [PATCH 0/4] tty: convert tasklets to use new tasklet_setup()
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [PATCH] serial: sh-sci: Make sure status register SCxSR is read in correct sequence
- [PATCHv2] serial: 8250: change lock order in serial8250_do_startup()
- RE: [PATCH] serial: sh-sci: Make sure status register SCxSR is read in correct sequence
- From: Prabhakar Mahadev Lad
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [PATCH] serial: sh-sci: Make sure status register SCxSR is read in correct sequence
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- [PATCH v4 3/3] dt-bindings: timer: Add compatible for Mediatek MT8192
- [PATCH v4 2/3] dt-bindings: serial: Add compatible for Mediatek MT8192
- [PATCH v4 1/3] arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile
- [PATCH v4 0/4] Add basic node support for Mediatek MT8192 SoC
- Re: [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- [PATCH] uart:8250: change lock order in serial8250_do_startup()
- Re: [PATCH] serial: 8250_exar: Fix number of ports for Commtech PCIe cards
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- [PATCH] serial: 8250_exar: Fix number of ports for Commtech PCIe cards
- Re: [PATCH] serial: 8250_exar: Bug fix for determination of number of ports for Commtech PCIe cards
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- [PATCH] serial: stm32: avoid kernel warning on absence of optional IRQ
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [PATCH] serial: 8250_exar: Bug fix for determination of number of ports for Commtech PCIe cards
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- [PATCH] serial: pl011: Don't leak amba_ports entry on driver register error
- [PATCH] serial: pl011: Fix oops on -EPROBE_DEFER
- Re: [RFC 4/5] serial: amba-pl011: Enable NMI aware uart port
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [Kgdb-bugreport] [PATCH] serial: qcom_geni_serial: Fix recent kdb hang
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [RFC 1/5] tty/sysrq: Make sysrq handler NMI aware
- Re: [RFC 2/5] serial: core: Add framework to allow NMI aware serial drivers
- Re: [RFC 4/5] serial: amba-pl011: Enable NMI aware uart port
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- [PATCH] serial: 8250_exar: Bug fix for determination of number of ports for Commtech PCIe cards
- Re: [PATCH] dt-bindings: Whitespace clean-ups in schema files
- Re: Serial raw mode. Bug in serial driver in Linux kernel? Is documentation correct?
- Re: Serial raw mode. Bug in serial driver in Linux kernel? Is documentation correct?
- Serial raw mode. Bug in serial driver in Linux kernel? Is documentation correct?
- Recursive/circular locking in serial8250_console_write/serial8250_do_startup
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- Re: [RFC 0/5] Introduce NMI aware serial drivers
- [PATCH v10 5/5] drivers/tty/serial: add LiteUART driver
- [PATCH v10 4/5] dt-bindings: serial: document LiteUART bindings
- [PATCH v10 3/5] drivers/soc/litex: add LiteX SoC Controller driver
- [PATCH v10 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
- [PATCH v10 1/5] dt-bindings: vendor: add vendor prefix for LiteX
- [PATCH v10 0/5] LiteX SoC controller and LiteUART serial driver
- Re: [RFC v2 03/11] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
- Re: [RFC][PATCH] tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup
- [PATCH V2 5/5] dt-bindings: serial: Convert NXP lpuart to json-schema
- [PATCH V2 3/5] dt-bindings: serial: Convert i.MX uart to json-schema
- [PATCH V2 2/5] dt-bindings: clock: Update i.MX23 example
- [PATCH V2 4/5] dt-bindings: serial: Convert MXS auart to json-schema
- [PATCH V2 1/5] dt-bindings: clock: Update i.MX28 example
- Re: [PATCH] tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
- Re: [PATCH] tty: serial: qcom_geni_serial: Remove the UART frequency table
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]