[PATCH v1] serial: 8250_fintek: Print Fintek chip name

[Flavio Suligoi <f.suligoi@xxxxxxx>]

At the moment, if a Fintek UART is detected, there is no
printed information about this.
The ttyS port is declared as a simple 16550A port, but,
especially when we want to use the RS485 mode, it's
very important understand if the Fintek UART is correctly
detected as expected.

Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>
---
 drivers/tty/serial/8250/8250_fintek.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 31c9e83ea3cb..ef2303cb5176 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -97,6 +97,7 @@ struct fintek_8250 {
 	u16 base_port;
 	u8 index;
 	u8 key;
+	const char *chip_name;
 };
 
 static u8 sio_read_reg(struct fintek_8250 *pdata, u8 reg)
@@ -140,9 +141,11 @@ static void fintek_8250_exit_key(u16 base_port)
 	release_region(base_port + ADDR_PORT, 2);
 }
 
-static int fintek_8250_check_id(struct fintek_8250 *pdata)
+static int fintek_8250_check_id(struct fintek_8250 *pdata,
+				struct uart_8250_port *uart)
 {
 	u16 chip;
+	const char *chip_name;
 
 	if (sio_read_reg(pdata, VENDOR_ID1) != VENDOR_ID1_VAL)
 		return -ENODEV;
@@ -155,17 +158,35 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata)
 
 	switch (chip) {
 	case CHIP_ID_F81865:
+		chip_name = "F81865";
+		break;
 	case CHIP_ID_F81866:
+		chip_name = "F81866";
+		break;
 	case CHIP_ID_F81966:
+		chip_name = "F81966";
+		break;
 	case CHIP_ID_F81216AD:
+		chip_name = "F81216AD";
+		break;
 	case CHIP_ID_F81216H:
+		chip_name = "F81216H";
+		break;
 	case CHIP_ID_F81216:
+		chip_name = "F81216";
 		break;
 	default:
 		return -ENODEV;
 	}
 
 	pdata->pid = chip;
+
+	pr_info("%s%s%s Fintek %s\n",
+		uart->port.dev ? dev_name(uart->port.dev) : "",
+		uart->port.dev ? ": " : "",
+		uart->port.name,
+		chip_name);
+
 	return 0;
 }
 
@@ -406,7 +427,7 @@ static int probe_setup_port(struct fintek_8250 *pdata,
 
 			if (fintek_8250_enter_key(addr[i], keys[j]))
 				continue;
-			if (fintek_8250_check_id(pdata) ||
+			if (fintek_8250_check_id(pdata, uart) ||
 			    fintek_8250_get_ldn_range(pdata, &min, &max)) {
 				fintek_8250_exit_key(addr[i]);
 				continue;
-- 
2.25.1