* switch "do { A; } while (1)" to "while (1) { A; }"
* switch "if (A) B; else break;" to "if (!A) break; B;"
* remove unused assignment from p->serial_in() to status
Objdump -d shows no difference.
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: Jonathan Hunter <jonathanh@xxxxxxxxxx>
---
drivers/tty/serial/8250/8250_tegra.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c
index c0ffad1572c6..e13ae18b0713 100644
--- a/drivers/tty/serial/8250/8250_tegra.c
+++ b/drivers/tty/serial/8250/8250_tegra.c
@@ -26,16 +26,17 @@ static void tegra_uart_handle_break(struct uart_port *p)
{
unsigned int status, tmout = 10000;
- do {
+ while (1) {
status = p->serial_in(p, UART_LSR);
- if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
- status = p->serial_in(p, UART_RX);
- else
+ if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)))
break;
+
+ p->serial_in(p, UART_RX);
+
if (--tmout == 0)
break;
udelay(1);
- } while (1);
+ }
}
static int tegra_uart_probe(struct platform_device *pdev)
--
2.30.0
