Include the generic serial.yaml dtschema so the child node like "bluetooh" will be properly matched: arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: serial@13800000: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- .../bindings/serial/samsung_uart.yaml | 26 ++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 3e29b561223d..f4faf32ab00f 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -78,9 +78,11 @@ required: - interrupts - reg -additionalProperties: false +unevaluatedProperties: false allOf: + - $ref: /schemas/serial.yaml# + - if: properties: compatible: @@ -134,3 +136,25 @@ examples: <&clocks SCLK_UART>; samsung,uart-fifosize = <16>; }; + + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; + pinctrl-0 = <&uart0_data &uart0_fctl>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; + pinctrl-names = "default"; + }; + }; -- 2.25.1