Linux Samsung SOC

• Thread Index

• Re: [PATCH v3 1/6] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 3/4] arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 2/4] arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 0/4] Enable UFS on gs101 / Pixel 6 (Oriole)
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 2/2] pinctrl: samsung: support a bus clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v3 0/2] clock support for Samsung Exynos pin controller (Google Tensor gs101)
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 2/2] pinctrl: samsung: support a bus clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 0/2] clock support for Samsung Exynos pin controller (Google Tensor gs101)
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v3 6/6] scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 5/6] scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into drvdata
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 4/6] scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 3/6] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 2/6] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 0/6] ufs-exynos support for Tensor GS101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 3/5] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 5/5] clk: samsung: gs101: add support for cmu_hsi2
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 5/5] clk: samsung: gs101: add support for cmu_hsi2
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 4/5] clk: samsung: gs101: add support for cmu_hsi0
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 2/5] arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 0/5] HSI0 and HSI2 support for Google Tensor gs101
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH 2/2] pinctrl: samsung: support a bus clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 03/14] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 06/14] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 2/2] pinctrl: samsung: support a bus clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 0/2] clock support for Samsung Exynos pin controller (Google Tensor gs101)
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 01/14] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 06/14] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 05/14] arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 04/14] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 00/14] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 00/14] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: exynos: add support for Google Tensor gs101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 2/7] phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/7] phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: exynos: add support for Google Tensor gs101
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] clk: samsung: Revert "clk: Use device_get_match_data()"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] clk: samsung: Revert "clk: Use device_get_match_data()"
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 2/7] phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [GIT PULL 2/2] arm64: dts: samsung: dts for v6.10
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [GIT PULL 1/2] ARM: dts: samsung: dts for v6.10
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH 1/3] dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 00/14] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [GIT PULL] exynos-drm-next
  • From: Inki Dae <inki.dae@xxxxxxxxxxx>
• Re: convert SCSI to atomic queue limits, part 1 (v3)
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1] scsi: ufs: exynos: Support module autoloading
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] gpu: drm: exynos: hdmi: eliminate uses of of_node_put()
  • From: Inki Dae <daeinki@xxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: exynos: add support for Google Tensor gs101
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 03/14] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 01/14] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] spi: spi-s3c64xx.c: Remove of_node_put for auto cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/7] phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 7/7] phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/7] phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init()
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: exynos: gs101-oriole: enable USB on this board
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: exynos: gs101: add USB & USB-phy nodes
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 0/2] enable USB on Pixel 6 (Oriole)
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH] drm/exynos: fix .get_modes return value in case of errors
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH v2 14/14] phy: samsung-ufs: ufs: exit on first reported error
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 13/14] phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 12/14] scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 11/14] scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into drvdata
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 10/14] scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 09/14] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 08/14] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 07/14] clk: samsung: gs101: add support for cmu_hsi2
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 06/14] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 05/14] arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 04/14] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 03/14] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 02/14] dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 01/14] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 00/14] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] drm/exynos: fix .get_modes return value in case of errors
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: exynos: add support for Google Tensor gs101
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 0/2] USB (dwc3-glue) support for Google Tensor gs101
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: samsung,exynos-dwc3: add gs101 compatible
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 7/7] phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 6/7] phy: exynos5-usbdrd: convert to clk_bulk for phy (register) access
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 5/7] phy: exynos5-usbdrd: uniform order of register bit macros
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 0/7] USB31DRD phy support for Google Tensor gs101 (HS & SS)
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 4/7] phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init()
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 3/7] phy: exynos5-usbdrd: support isolating HS and SS ports independently
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 2/7] phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 1/7] dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 3/3] clk: samsung: clk-gs101: add cmu_hsi0
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH 0/3] HSI0 support for Google Tensor gs101
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 2/2] cpufreq: scmi: Update Energy Model with allowed performance limits
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH 2/2] cpufreq: scmi: Update Energy Model with allowed performance limits
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH 09/17] phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 10/17] phy: samsung-ufs: ufs: Add SoC callbacks for calibration and clk data recovery
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: (subset) [PATCH 00/34] address all -Wunused-const warnings
  • From: Michael Ellerman <patch-notifications@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] PM: EM: Add min/max available performance state limits
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH 1/2] PM: EM: Add min/max available performance state limits
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v4 0/2] clk: samsung: introduce nMUX to reparent MUX clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 5/5] usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v4 4/5] usb: ohci-exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v4 3/5] usb: ohci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v4 2/5] usb: ehci-exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v4 1/5] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: "Thierry Reding" <thierry.reding@xxxxxxxxx>
• [PATCH v4 2/2] clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v4 1/2] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v4 0/2] clk: samsung: introduce nMUX to reparent MUX clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 07/17] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 07/17] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH] spi: spi-s3c64xx.c: Remove of_node_put for auto cleanup
  • From: Shivani Gupta <shivani07g@xxxxxxxxx>
• [PATCH v2] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 10/17] phy: samsung-ufs: ufs: Add SoC callbacks for calibration and clk data recovery
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3 2/2] PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v3 1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 06/17] arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: phy: samsung,ufs-phy: Add dedicated gs101-ufs-phy compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v3 5/5] usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Jisheng Zhang <jszhang@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v6 00/11] IOMMU memory observability
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• RE: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v3 0/3] clk: samsung: introduce nMUX to reparent MUX clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH] gpu: drm: exynos: hdmi: eliminate uses of of_node_put()
  • From: Shivani Gupta <shivani07g@xxxxxxxxx>
• Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v3 0/3] clk: samsung: introduce nMUX to reparent MUX clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v6 09/11] iommu/tegra-smmu: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 11/11] iommu: account IOMMU allocated memory
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 10/11] iommu: observability of the IOMMU allocations
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 08/11] iommu/sun50i: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 07/11] iommu/rockchip: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 06/11] iommu/exynos: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 05/11] iommu/io-pgtable-dart: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 03/11] iommu/amd: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 04/11] iommu/io-pgtable-arm: use page allocation function provided by iommu-pages.h
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 01/11] iommu/vt-d: add wrapper functions for page allocations
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 02/11] iommu/dma: use iommu_put_pages_list() to releae freelist
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH v6 00/11] IOMMU memory observability
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 00/11] IOMMU memory observability
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• Re: [PATCH v3 1/5] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/5] usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v3 4/5] usb: ohci-exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v3 3/5] usb: ohci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v3 2/5] usb: ehci-exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v3 1/5] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v5 00/11] IOMMU memory observability
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: convert SCSI to atomic queue limits, part 1 (v3)
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1] scsi: ufs: exynos: Support module autoloading
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: (subset) [PATCH 00/34] address all -Wunused-const warnings
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 21/23 v3.1] mpi3mr: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH 21/23 v3.1] mpi3mr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• RE: [PATCH 09/17] phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v1] scsi: ufs: exynos: Support module autoloading
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH 16/17] scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH 15/17] scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into drvdata
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH v1] scsi: ufs: exynos: Support module autoloading
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 14/17] scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH 13/17] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH 12/17] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  • From: William McVicker <willmcvicker@xxxxxxxxxx>
• [PATCH v1] scsi: ufs: exynos: Support module autoloading
  • From: Will McVicker <willmcvicker@xxxxxxxxxx>
• Re: [PATCH 14/23] hptiop: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 15/23] ipr: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 17/23] usb-storage: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 16/23] pmcraid: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH 1/2] PM: EM: Add min/max available performance state limits
  • From: Hongyan Xia <hongyan.xia2@xxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 20/23] libata: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 19/23] pata_macio: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 18/23] sata_nv: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 17/23] usb-storage: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 16/23] pmcraid: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 15/23] ipr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 14/23] hptiop: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Christoph Hellwig <hch@xxxxxx>
• convert SCSI to atomic queue limits, part 1 (v3)
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v5 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: convert SCSI to atomic queue limits, part 1 (v2)
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v1 3/4] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v5 0/4] Update Energy Model after chip binning adjusted voltages
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v1 3/4] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• RE: [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v5 01/11] iommu/vt-d: add wrapper functions for page allocations
  • From: Linu Cherian <lcherian@xxxxxxxxxxx>
• Re: (subset) [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 00/34] address all -Wunused-const warnings
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v1 3/4] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v1 3/4] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 0/2] Update Energy Model with perfromance limits
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• GS101 pl330 AxCACHE
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 0/2] Update Energy Model with perfromance limits
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 17/17] MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 16/17] scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 15/17] scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into drvdata
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 14/17] scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 13/17] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 12/17] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 11/17] phy: samsung-ufs: ufs: Add support for gs101 UFS phy tuning
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 10/17] phy: samsung-ufs: ufs: Add SoC callbacks for calibration and clk data recovery
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 07/17] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: phy: samsung,ufs-phy: Add dedicated gs101-ufs-phy compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 06/17] arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 09/17] phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v1 3/4] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• RE: [PATCH 00/11] drm/exynos: drop driver owner initialization
  • From: 대인기/Tizen Platform Lab(SR)/삼성전자 <inki.dae@xxxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/6] usb: ohci-exynos: Switch from CONFIG_PM guards to pm_ptr()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] usb: ehci-exynos: Switch from CONFIG_PM guards to pm_ptr()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] drm: fix DRM_DISPLAY_DP_HELPER dependencies
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v5 01/11] iommu/vt-d: add wrapper functions for page allocations
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• Re: [PATCH v2 1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v5 00/11] IOMMU memory observability
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• Re: [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] drm: fix DRM_DISPLAY_DP_HELPER dependencies
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: UFS storage support for Tensor/GS101?
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 17/17] MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 16/17] scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 15/17] scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into drvdata
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 14/17] scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 13/17] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 12/17] scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 11/17] phy: samsung-ufs: ufs: Add support for gs101 UFS phy tuning
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 10/17] phy: samsung-ufs: ufs: Add SoC callbacks for calibration and clk data recovery
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 09/17] phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 08/17] clk: samsung: gs101: add support for cmu_hsi2
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 07/17] arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 06/17] arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 04/17] dt-bindings: phy: samsung,ufs-phy: Add dedicated gs101-ufs-phy compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 03/17] dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 02/17] dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 01/17] dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v5 01/11] iommu/vt-d: add wrapper functions for page allocations
  • From: Linu Cherian <lcherian@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/6] usb: ohci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 5/6] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 5/6] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/6] usb: ohci-exynos: Use devm_clk_get_enabled() helpers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 6/6] usb: dwc3: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v2 5/6] usb: dwc3: exynos: Use devm_regulator_bulk_get_enable() helper function
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• [PATCH v2 4/6] usb: ohci-exynos: Switch from CONFIG_PM guards to pm_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v2 3/6] usb: ohci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v2 2/6] usb: ehci-exynos: Switch from CONFIG_PM guards to pm_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v2 1/6] usb: ehci-exynos: Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v5 00/11] IOMMU memory observability
  • From: Linu Cherian <lcherian@xxxxxxxxxxx>
• Re: [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] PM / devfreq: exynos: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH v2 1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• [PATCH 2/2] cpufreq: scmi: Update Energy Model with allowed performance limits
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH 1/2] PM: EM: Add min/max available performance state limits
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH 0/2] Update Energy Model with perfromance limits
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v5 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v5 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v5 2/4] PM: EM: Refactor em_adjust_new_capacity()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v5 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v5 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v5 00/11] IOMMU memory observability
  • From: Pasha Tatashin <pasha.tatashin@xxxxxxxxxx>
• Re: [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v4 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v4 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH v4 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH v4 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 31/34] spi: remove incorrect of_match_ptr annotations
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 00/34] address all -Wunused-const warnings
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 20/23] libata: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 19/23] pata_macio: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 18/23] sata_nv: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 17/23] usb-storage: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 16/23] pmcraid: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 15/23] ipr: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 14/23] hptiop: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Kanchan Joshi <joshi.k@xxxxxxxxxxx>
• Re: [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v4 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v4 2/4] PM: EM: Refactor em_adjust_new_capacity()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v4 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v4 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 20/23] libata: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 19/23] pata_macio: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 18/23] sata_nv: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 17/23] usb-storage: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 16/23] pmcraid: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 15/23] ipr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 14/23] hptiop: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• convert SCSI to atomic queue limits, part 1 (v2)
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/23] block: add a helper to cancel atomic queue limit updates
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] clk: s2mps11: Check of_clk_add_hw_provider() result
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] clk: s2mps11: Check of_clk_add_hw_provider() result
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] clk: s2mps11: Check of_clk_add_hw_provider() result
  • From: Aleksandr Aprelkov <aaprelkov@xxxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynosautov9: fix wrong pll clock id value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 11/11] drm/exynos: mixer: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 10/11] drm/exynos: hdmi: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 09/11] drm/exynos: vidi: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 08/11] drm/exynos: scaler: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 07/11] drm/exynos: rotator: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 06/11] drm/exynos: mic: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 05/11] drm/exynos: gsc: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 04/11] drm/exynos: g2d: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 03/11] drm/exynos: dsi: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 02/11] drm/exynos: fimd: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 01/11] drm/exynos: fimc: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 00/11] drm/exynos: drop driver owner initialization
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Change Krzysztof Kozlowski's email address
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH REVIEW] hwrng: add exynos Secure World RNG device driver
  • From: Gowthami Thiagarajan <gthiagarajan@xxxxxxxxxxx>
• Re: [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• Re: [PATCH] clk: samsung: exynosautov9: fix wrong pll clock id value
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH REVIEW] hwrng: add exynos Secure World RNG device driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH REVIEW] hwrng: add exynos Secure World RNG device driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH REVIEW] hwrng: add exynos Secure World RNG device driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH REVIEW] hwrng: add exynos Secure World RNG device driver
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH v3 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v3 3/3] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 2/3] clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 0/3] clk: samsung: introduce nMUX to reparent MUX clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 3/3] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: exynos: gs101: join lines close to 80 chars
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 2/3] clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v2 3/3] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 2/3] clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• Re: [PATCH v2 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re : [PATCH 23/23] block: remove now unused queue limits helpers
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re : [PATCH 20/23] libata: switch to using ->device_configure
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH v3 0/5] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: exynos: gs101: join lines close to 80 chars
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] clk: samsung: exynosautov9: fix wrong pll clock id value
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• [PATCH v3 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v3 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v3 2/4] PM: EM: Change the em_adjust_new_capacity() to re-use code
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v3 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v3 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [RESEND][PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [RESEND][PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [RESEND][PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• FAILED: Patch "drm/exynos: do not return negative values from .get_modes()" failed to apply to 4.19-stable tree
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH] spi: s3c64xx: Use DMA mode from fifo size
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• Re: [RESEND][PATCH v2 2/4] PM: EM: Change the em_adjust_new_capacity() to re-use code
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [RESEND][PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v2 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• [PATCH v2 1/3] clk: samsung: introduce nMUX for MUX clks that can reparented
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 3/3] clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 2/3] clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 0/3] clk: samsung: introduce nMUX to reparent MUX clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: exynos4212-tab3: limit usable memory range
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 4/5] arm64: dts: exynos: gs101: join lines close to 80 chars
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 3/5] arm64: dts: exynos: gs101: move pinctrl-* properties after clocks
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 2/5] arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 1/5] arm64: dts: exynos: gs101: reorder pinctrl-* properties
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v3 0/5] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: exynos: gs101: join lines close to 80 chars
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: exynos: gs101: order pinctrl-* props alphabetically
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• RE: [PATCH v2 4/4] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: exynos: gs101: order pinctrl-* props alphabetically
  • From: André Draszik <andre.draszik@xxxxxxxxxx>
• RE: [PATCH v2 3/4] arm64: dts: exynos: gs101: join lines close to 80 chars
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH v2 2/4] arm64: dts: exynos: gs101: order pinctrl-* props alphabetically
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• RE: [PATCH v2 1/4] arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [RESEND][PATCH v2 2/4] PM: EM: Change the em_adjust_new_capacity() to re-use code
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• [PATCH v2 4/4] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: exynos: gs101: join lines close to 80 chars
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: exynos: gs101: order pinctrl-* props alphabetically
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 0/4] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [RESEND][PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• Re: [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Takashi Sakamoto <o-takashi@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: memory-controllers: add Samsung S5Pv210 SoC DMC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/3] clk: samsung: Implement manual PLL control for ARM64 SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND][PATCH v2 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [RESEND][PATCH v2 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] ARM: dts: samsung: exynos5800-peach-pi: switch to undeprecated DP HPD GPIOs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] power: reset: add new gs101-poweroff driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: display: samsung,exynos5-dp: convert to DT Schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/7] ARM: dts: samsung: exynos5433: specify the SPI FIFO depth
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: samsung: smdkv310: fix keypad no-autorepeat
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 5/7] ARM: dts: samsung: exynos5433: specify the SPI FIFO depth
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/7] ARM: dts: samsung: specify the SPI FIFO depth
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: samsung: s5pv210: align onenand node name with bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits
  • From: John Garry <john.g.garry@xxxxxxxxxx>
• Re: [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 20/23] libata: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 19/23] pata_macio: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 18/23] sata_nv: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 17/23] usb-storage: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 16/23] pmcraid: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 15/23] ipr: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 14/23] hptiop: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: samsung: exynos850: fix propagation of SPI IPCLK rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 11/23] megaraid_sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 18/23] sata_nv: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 17/23] usb-storage: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 13/23] sbp2: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 19/23] pata_macio: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/23] scsi: add a dma_alignment field to the host and host template
  • From: Christoph Hellwig <hch@xxxxxx>
• convert SCSI to atomic queue limits, part 1
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v6 000/164] pwm: Improve lifetime tracking for pwm_chips
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v6 000/164] pwm: Improve lifetime tracking for pwm_chips
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• [PATCH 21/23] mpi3mr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 23/23] block: remove now unused queue limits helpers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 20/23] libata: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/23] scsi: add a device_configure method to the host template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 16/23] pmcraid: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 15/23] ipr: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 14/23] hptiop: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/23] mpt3sas: switch to using ->device_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: samsung: exynos850: fix propagation of SPI IPCLK rate
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: exynos: gs101: define all PERIC USI nodes
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• [PATCH 64/64] i2c: reword i2c_algorithm in drivers according to newest specification
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 00/64] i2c: reword i2c_algorithm according to newest specification
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] power: reset: add new gs101-poweroff driver
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [RESEND][PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [RESEND][PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [RESEND][PATCH v2 2/4] PM: EM: Change the em_adjust_new_capacity() to re-use code
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [RESEND][PATCH v2 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [RESEND][PATCH v2 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v2 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v2 4/4] soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v2 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v2 2/4] PM: EM: Change the em_adjust_new_capacity() to re-use code
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v2 1/4] OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• [PATCH v2 0/4] Update Energy Model after chip binning adjusted voltages
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH 3/4] PM: EM: Add em_dev_update_chip_binning()
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH 4/4] clk: samsung: exynos850: fix propagation of SPI IPCLK rate
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: samsung: clk: re-parent MUX to OSCCLK at run-time
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: display: samsung,exynos5-dp: convert to DT Schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: display: samsung,exynos5-dp: convert to DT Schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: display: samsung,exynos5-dp: convert to DT Schema
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 1/3] clk: samsung: Implement manual PLL control for ARM64 SoCs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] power: reset: add new gs101-poweroff driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: exynos: gs101: add poweroff node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: power: reset: add gs101 poweroff bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] power: reset: add new gs101-poweroff driver
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: exynos: gs101: add poweroff node
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: power: reset: add gs101 poweroff bindings
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH v4 1/3] clk: samsung: Implement manual PLL control for ARM64 SoCs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 04/11] drm/exynos: Use drm_driver_legacy_fb_format() for fbdev
  • From: Frej Drejhammar <frej.drejhammar@xxxxxxxxx>
• [PATCH 00/11] drm: Only try to set formats supported by the hardware
  • From: Frej Drejhammar <frej.drejhammar@xxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
  • From: Conor Dooley <conor@xxxxxxxxxx>