Also add the subnodes for the GPIO expander and NVMEM, and define the NVMEM layout. The NVMEM layout is declared such that it matches downstream's open-coded configuration [1]. The pinctrl nodes are kept sorted by the 'samsung,pins' property rather than node name, as I think that makes it easier to look at and to add new nodes unambiguously in the future. Link: https://android.googlesource.com/kernel/google-modules/bms/+/96e729a83817/max77759_maxq.c#67 [1] Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx> --- .../boot/dts/exynos/google/gs101-pixel-common.dtsi | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi index b25230495c64dce60916b7cd5dcb9a7cce5d0e4e..f67fa1e84d994de4d40f29a2d437ab6401ac133d 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi @@ -188,6 +188,60 @@ usbc0_role_sw: endpoint { }; }; }; + + pmic@66 { + compatible = "maxim,max77759"; + reg = <0x66>; + + pinctrl-0 = <&if_pmic_int>; + pinctrl-names = "default"; + interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio { + compatible = "maxim,max77759-gpio"; + + gpio-controller; + #gpio-cells = <2>; + /* + * "Human-readable name [SIGNAL_LABEL]" where the + * latter comes from the schematic + */ + gpio-line-names = "OTG boost [OTG_BOOST_EN]", + "max20339 IRQ [MW_OVP_INT_L]"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + nvmem-0 { + compatible = "maxim,max77759-nvmem"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + reboot-mode@0 { + reg = <0x0 0x4>; + }; + + boot-reason@4 { + reg = <0x4 0x4>; + }; + + shutdown-user-flag@8 { + reg = <0x8 0x1>; + }; + + rsoc@a { + reg = <0xa 0x2>; + }; + }; + }; + }; }; &pinctrl_far_alive { @@ -211,6 +265,13 @@ typec_int: typec-int-pins { samsung,pin-pud = <GS101_PIN_PULL_UP>; samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; }; + + if_pmic_int: if-pmic-int-pins { + samsung,pins = "gpa8-3"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; }; &pinctrl_gpio_alive { -- 2.49.0.rc0.332.g42c0ae87b1-goog
