On 3/4/25 12:20, Anand Moon wrote:
Hi Lukasz,
On Sat, 1 Mar 2025 at 00:06, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
Hi Lukasz,
On Fri, 28 Feb 2025 at 22:58, Lukasz Luba <lukasz.luba@xxxxxxx> wrote:
On 2/16/25 19:58, Anand Moon wrote:
Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
v3: new patch
---
drivers/thermal/samsung/exynos_tmu.c | 21 +++++++--------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index fe090c1a93ab..a34ba3858d64 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -256,7 +256,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
unsigned int status;
int ret = 0;
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
clk_enable(data->clk_sec);
@@ -270,7 +270,6 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
clk_disable(data->clk_sec);
clk_disable(data->clk);
- mutex_unlock(&data->lock);
return ret;
}
@@ -292,13 +291,12 @@ static int exynos_thermal_zone_configure(struct platform_device *pdev)
return ret;
}
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
data->tmu_set_crit_temp(data, temp / MCELSIUS);
clk_disable(data->clk);
- mutex_unlock(&data->lock);
return 0;
}
@@ -325,12 +323,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
data->tmu_control(pdev, on);
data->enabled = on;
clk_disable(data->clk);
- mutex_unlock(&data->lock);
}
static void exynos_tmu_update_bit(struct exynos_tmu_data *data, int reg_off,
@@ -645,7 +642,7 @@ static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
*/
return -EAGAIN;
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
value = data->tmu_read(data);
@@ -655,7 +652,6 @@ static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
*temp = code_to_temp(data, value) * MCELSIUS;
clk_disable(data->clk);
- mutex_unlock(&data->lock);
return ret;
}
@@ -720,11 +716,10 @@ static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
if (temp && temp < MCELSIUS)
goto out;
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
data->tmu_set_emulation(data, temp);
clk_disable(data->clk);
- mutex_unlock(&data->lock);
return 0;
out:
return ret;
@@ -760,14 +755,13 @@ static irqreturn_t exynos_tmu_threaded_irq(int irq, void *id)
thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
data->tmu_clear_irqs(data);
clk_disable(data->clk);
- mutex_unlock(&data->lock);
return IRQ_HANDLED;
}
@@ -987,7 +981,7 @@ static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
{
struct exynos_tmu_data *data = thermal_zone_device_priv(tz);
- mutex_lock(&data->lock);
+ guard(mutex)(&data->lock);
clk_enable(data->clk);
if (low > INT_MIN)
@@ -1000,7 +994,6 @@ static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
data->tmu_disable_high(data);
clk_disable(data->clk);
- mutex_unlock(&data->lock);
return 0;
}
Thanks for your review comments.
IMO you should be able to even use something like we have
core framework:
guard(thermal_zone)(tz);
Your mutex name is simply 'lock' in the struct exynos_tmu_data
so you should be able to leverage this by:
guard(exynos_tmu_data)(data);
If I introduce the guard it creates a compilation error
amoon@anand-m920q:~/mainline/linux-exynos-6.y-devel$ vi
drivers/thermal/samsung/exynos_tmu.c +306
amoon@anand-m920q:~/mainline/linux-exynos-6.y-devel$ make -j$(nproc)
ARCH=arm CROSS_COMPILE=arm-none-eabi- LOCALVERSION=-u3ml dtbs zImage
modules
CALL scripts/checksyscalls.sh
CHK kernel/kheaders_data.tar.xz
CC drivers/thermal/samsung/exynos_tmu.o
CC [M] drivers/md/raid10.o
In file included from ./include/linux/irqflags.h:17,
from ./arch/arm/include/asm/bitops.h:28,
from ./include/linux/bitops.h:68,
from ./include/linux/kernel.h:23,
from ./include/linux/clk.h:13,
from drivers/thermal/samsung/exynos_tmu.c:14:
drivers/thermal/samsung/exynos_tmu.c: In function 'exynos_tmu_update_bit':
./include/linux/cleanup.h:258:9: error: unknown type name
'class_exynos_tmu_data_t'
258 | class_##_name##_t var
__cleanup(class_##_name##_destructor) = \
| ^~~~~~
./include/linux/cleanup.h:309:9: note: in expansion of macro 'CLASS'
309 | CLASS(_name, __UNIQUE_ID(guard))
| ^~~~~
drivers/thermal/samsung/exynos_tmu.c:338:9: note: in expansion of macro 'guard'
338 | guard(exynos_tmu_data)(data);
| ^~~~~
drivers/thermal/samsung/exynos_tmu.c:338:9: error: cleanup argument
not a function
[snip]
Right, you're missing the definition at the begging, like:
DEFINE_GUARD(exynos_tmu_data, struct exynos_tmu_data *,
mutex_lock(&_T->lock),
mutex_unlock(&_T->lock))
below the struct exynos_tmu_data definition.
Also, make sure you include the cleanup.h (it might not complain,
but it would be explicit and more clear)
