[PATCH v3 4/4] drivers/thermal/exymos: Use guard notation when acquiring mutex

[Anand Moon <linux.amoon@xxxxxxxxx>]

Using guard notation makes the code more compact and error handling
more robust by ensuring that mutexes are released in all code paths
when control leaves critical section.

Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
v3: new patch
---
 drivers/thermal/samsung/exynos_tmu.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index fe090c1a93ab..a34ba3858d64 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -256,7 +256,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	unsigned int status;
 	int ret = 0;
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 	clk_enable(data->clk_sec);
 
@@ -270,7 +270,6 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 
 	clk_disable(data->clk_sec);
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 
 	return ret;
 }
@@ -292,13 +291,12 @@ static int exynos_thermal_zone_configure(struct platform_device *pdev)
 		return ret;
 	}
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 
 	data->tmu_set_crit_temp(data, temp / MCELSIUS);
 
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 
 	return 0;
 }
@@ -325,12 +323,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 	data->tmu_control(pdev, on);
 	data->enabled = on;
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 }
 
 static void exynos_tmu_update_bit(struct exynos_tmu_data *data, int reg_off,
@@ -645,7 +642,7 @@ static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
 		 */
 		return -EAGAIN;
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 
 	value = data->tmu_read(data);
@@ -655,7 +652,6 @@ static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
 		*temp = code_to_temp(data, value) * MCELSIUS;
 
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 
 	return ret;
 }
@@ -720,11 +716,10 @@ static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
 	if (temp && temp < MCELSIUS)
 		goto out;
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 	data->tmu_set_emulation(data, temp);
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 	return 0;
 out:
 	return ret;
@@ -760,14 +755,13 @@ static irqreturn_t exynos_tmu_threaded_irq(int irq, void *id)
 
 	thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 
 	/* TODO: take action based on particular interrupt */
 	data->tmu_clear_irqs(data);
 
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 
 	return IRQ_HANDLED;
 }
@@ -987,7 +981,7 @@ static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
 	struct exynos_tmu_data *data = thermal_zone_device_priv(tz);
 
-	mutex_lock(&data->lock);
+	guard(mutex)(&data->lock);
 	clk_enable(data->clk);
 
 	if (low > INT_MIN)
@@ -1000,7 +994,6 @@ static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
 		data->tmu_disable_high(data);
 
 	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
 
 	return 0;
 }
-- 
2.48.1