Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v4 33/80] drm/omap: drop omapdss-boot-init
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 32/80] drm/omap: dsi: convert to drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 31/80] drm/omap: dsi: drop custom panel capability support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 30/80] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 29/80] drm/omap: dsi: move panel refresh function to host
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 28/80] drm/omap: dsi: do ULPS in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 27/80] drm/omap: dsi: untangle ulps ops from enable/disable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 26/80] drm/omap: dsi: do bus locking in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 25/80] drm/omap: dsi: drop custom enable_te() API
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 24/80] drm/omap: dsi: move TE GPIO handling into core
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 23/80] drm/omap: dsi: lp/hs switching support for transfer()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 22/80] drm/omap: panel-dsi-cm: use bulk regulator API
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 21/80] drm/omap: dsi: use pixel-format and mode from attach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 20/80] drm/omap: dsi: drop useless sync()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 19/80] drm/omap: dsi: drop unused enable_te()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 18/80] drm/omap: dsi: drop unused get_te()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 17/80] drm/omap: dsi: drop unused memory_read()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 16/80] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 15/80] drm/omap: panel-dsi-cm: drop hardcoded VC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 14/80] drm/omap: dsi: request VC via mipi_dsi_attach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 13/80] drm/omap: panel-dsi-cm: use DSI helpers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 12/80] drm/omap: dsi: introduce mipi_dsi_host
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 11/80] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 10/80] drm/omap: dsi: simplify read functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 09/80] drm/omap: dsi: simplify write function
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 08/80] drm/omap: dsi: drop virtual channel logic
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 07/80] drm/omap: dsi: unexport specific data transfer functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 03/80] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 06/80] drm/omap: panel-dsi-cm: convert to transfer API
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 05/80] drm/omap: dsi: add generic transfer function
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 04/80] drm/omap: constify write buffers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 02/80] drm/omap: drop unused dsi.configure_pins
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 01/80] Revert "drm/omap: dss: Remove unused omap_dss_device operations"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v4 00/80] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Understanding OMAP5 DPLL_ABE and CM_CLKSEL_WKUPAON
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] remoteproc: Introduce deny_sysfs_ops flag
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Tom Rix <trix@xxxxxxxxxx>
• Droid 4 in next-20201120: cpcap-usb-phy.0: could not initialize VBUS or ID IIO:
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] mfd: omap-usb: depend on COMMON_CLK to fix compile tests
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] remoteproc: Introduce deny_sysfs_ops flag
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] MAINTAINERS tag for cleanup robot
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [RFC] MAINTAINERS tag for cleanup robot
  • From: trix@xxxxxxxxxx
• Re: [PATCH v2 2/3] remoteproc: Introduce deny_sysfs_ops flag
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 3/3] remoteproc: wkup_m3: Set deny_sysfs_ops flag
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/3] remoteproc: Introduce deny_sysfs_ops flag
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] remoteproc: Add a rproc_set_firmware() API
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] remoteproc: Add a rproc_set_firmware() API
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 3/3] remoteproc: wkup_m3: Set deny_sysfs_ops flag
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 0/3] remoteproc sysfs fixes/improvements
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 2/3] remoteproc: Introduce deny_sysfs_ops flag
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 1/3] remoteproc: Fix unbalanced boot with sysfs for no auto-boot rprocs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 16/16] mfd: twl6030: mark of_device_id table as maybe unused
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 1/2] ARM: dts: am33xx-l4: add dt node for new cpsw switchdev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/2] ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2 6/6] remoteproc/pru: Add support for various PRU cores on K3 J721E SoCs
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 5/6] remoteproc/pru: Add support for various PRU cores on K3 AM65x SoCs
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 3/6] remoteproc/pru: Add support for PRU specific interrupt configuration
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 4/6] remoteproc/pru: Add pru-specific debugfs support
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 2/6] remoteproc/pru: Add a PRU remoteproc driver
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v2 0/6] Add a PRU remoteproc driver
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pci: ti, j721e: Fix "ti, syscon-pcie-ctrl" to take argument
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/7] Configure genpd domains for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Configure genpd domains for dra7 and omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/8] ARM: dts: Configure power domain for omap5 dss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] ARM: dts: omap5: add remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] ARM: OMAP2+: Drop legacy platform data for dra7 gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] ARM: dts: Configure interconnect target module for dra7 iva
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] ARM: dts: dra7: add remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] Configure genpd domains for dra7 and omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] remoteproc/pru: Add support for PRU specific interrupt configuration
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 7/7] ARM: OMAP2+: Drop legacy platform data for omap4 gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] ARM: OMAP2+: Drop legacy platform data for omap4 iva
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] ARM: dts: Configure power domain for omap4 dsp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/7] ARM: dts: Configure power domain for omap4 dss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] ARM: dts: omap4: add remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/7] Configure genpd domains for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/16] PCI: dwc: Another round of clean-ups
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 1/2] arm: Fix memleak in omap2xxx_clkt_vps_init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove redundant assignment to variable ret
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: clock: Use IS_ERR_OR_NULL() to clean code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra76x: m_can: fix order of clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: suppress err msg for timers used as clockevent/source
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] remoteproc/pru: Add support for PRU specific interrupt configuration
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 3/3] arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes added for pcieX_ctrl
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] regulator: ti-abb: Fix array out of bound read access on the first transition
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: ti-abb: Fix array out of bound read access on the first transition
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] regulator: ti-abb: Fix array out of bound read access on the first transition
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 3/6] remoteproc/pru: Add support for PRU specific interrupt configuration
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 5/6] remoteproc/pru: Add support for various PRU cores on K3 AM65x SoCs
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 2/6] remoteproc/pru: Add a PRU remoteproc driver
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [arm] BUG: KASAN: slab-out-of-bounds in memcmp+0x30/0x5c
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] regulator: ti-abb: Fix array out of bound read access on the first transition
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] bus: ti-sysc: suppress err msg for timers used as clockevent/source
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [arm] BUG: KASAN: slab-out-of-bounds in memcmp+0x30/0x5c
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [arm] BUG: KASAN: slab-out-of-bounds in memcmp+0x30/0x5c
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/6] remoteproc/pru: Add support for PRU specific interrupt configuration
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 5/6] remoteproc/pru: Add support for various PRU cores on K3 AM65x SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/6] remoteproc/pru: Add a PRU remoteproc driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH] drivers: gpio: use of_match_ptr() and ACPI_PTR() macros
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [arm] BUG: KASAN: slab-out-of-bounds in memcmp+0x30/0x5c
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH AUTOSEL 5.9 01/21] Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH net] net: ethernet: ti: cpsw: fix error return code in cpsw_probe()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH net-next 3/3] net: ethernet: ti: am65-cpsw: enable broadcast/multicast rate limit support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] soc: ti: pruss: Fix wrong check against *get_match_data return value
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2] soc: ti: pruss: Fix wrong check against *get_match_data return value
  • From: santosh.shilimkar@xxxxxxxxxx
• Re: [PATCH net-next 3/3] net: ethernet: ti: am65-cpsw: enable broadcast/multicast rate limit support
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH net-next 3/3] net: ethernet: ti: am65-cpsw: enable broadcast/multicast rate limit support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2] soc: ti: pruss: Fix wrong check against *get_match_data return value
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 3/3] arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes added for pcieX_ctrl
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/3] PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/3] dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/3] PCI: J721E: Fix Broken DT w.r.t SYSCON DT
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2] soc: ti: pruss: Fix wrong check against *get_match_data return value
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH] soc: ti: pruss: Remove wrong check against *get_match_data return value
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/3] Enable eQEP counter driver on BeagleBone Blue
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 2/3] net: ethernet: ti: cpsw_new: enable broadcast/multicast rate limit support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] Enable eQEP counter driver on BeagleBone Blue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: add second SHA instance
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/17] ARM: OMAP2+: Drop legacy remaining legacy platform data for am4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/17] ARM: dts: Use simple-pm-bus for genpd for am4 l3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/17] ARM: dts: Move am4 l3 noc to a separate node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/17] ARM: dts: Use simple-pm-bus for genpd for am4 l4_per
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/17] ARM: dts: Use simple-pm-bus for genpd for am4 l4_fast
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/17] ARM: dts: Use simple-pm-bus for genpd for am4 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/17] ARM: OMAP2+: Drop legacy platform data for am4 mpuss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/17] ARM: OMAP2+: Drop legacy platform data for am4 ocmcram
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/17] ARM: OMAP2+: Drop legacy platform data for am4 emif
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/17] ARM: OMAP2+: Drop legacy platform data for am4 wkup_m3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/17] ARM: dts: Configure interconnect target module for am4 wkup_m3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/17] ARM: dts: Configure RTC powerdomain for am4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/17] ARM: OMAP2+: Drop legacy platform data for am4 control module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/17] soc: ti: omap-prm: am4: add genpd support for remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/17] ARM: dts: Configure also interconnect clocks for am4 system timer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/17] ARM: dts: am43xx: add remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/17] clk: ti: am437x: Keep am4 l3 main clock always on for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/17] Update am437x to boot with simple-pm-bus and genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to support motorola xt894's magnetometer and motorola xt875's accelerometer respectivly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: Fix memleak in ti_fapll_synth_setup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Enable OMAP3_THERMAL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4] mfd: tps65910: Correct power-off programming sequence
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: v5.10-rc3 vs. Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v5.10-rc3 vs. Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v3] Drivers: input: misc: Add driver touchscreen-buttons to support physically labeled buttons on touch screen surfaces
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: v5.10-rc3 vs. Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v5.10-rc3 vs. Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• v5.10-rc3 vs. Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH net-next 3/3] net: ethernet: ti: am65-cpsw: enable broadcast/multicast rate limit support
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH net-next 2/3] net: ethernet: ti: cpsw_new: enable broadcast/multicast rate limit support
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH 6/6] remoteproc/pru: Add support for various PRU cores on K3 J721E SoCs
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 4/6] remoteproc/pru: Add pru-specific debugfs support
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 5/6] remoteproc/pru: Add support for various PRU cores on K3 AM65x SoCs
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 2/6] remoteproc/pru: Add a PRU remoteproc driver
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 3/6] remoteproc/pru: Add support for PRU specific interrupt configuration
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: remoteproc: Add binding doc for PRU cores in the PRU-ICSS
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 0/6] Add a PRU remoteproc driver
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH 2/2] arm: Fix kfree NULL pointer in omap2xxx_clkt_vps_init
  • From: Youling Tang <tangyouling@xxxxxxxxxxx>
• [PATCH 1/2] arm: Fix memleak in omap2xxx_clkt_vps_init
  • From: Youling Tang <tangyouling@xxxxxxxxxxx>
• [PATCH net-next 3/3] net: ethernet: ti: am65-cpsw: enable broadcast/multicast rate limit support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next 1/3] drivers: net: cpsw: ale: add broadcast/multicast rate limit support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next 2/3] net: ethernet: ti: cpsw_new: enable broadcast/multicast rate limit support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next 0/3] net: ethernet: ti: cpsw: enable broadcast/multicast rate limit support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5] net: ethernet: ti: am65-cpts: update ret when ptp_clock is ERROR
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix cpts irq after suspend
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH] clk: ti: Fix memleak in ti_fapll_synth_setup
  • From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix cpts irq after suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH net] net: ethernet: ti: cpsw: fix error return code in cpsw_probe()
  • From: Zhang Changzhong <zhangchangzhong@xxxxxxxxxx>
• [PATCH v5] net: ethernet: ti: am65-cpts: update ret when ptp_clock is ERROR
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] ARM: omap2plus_defconfig: Enable OMAP3_THERMAL
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: fix cpts irq after suspend
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2] bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 33/56] drm/omap: dsi: convert to drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 29/56] drm/omap: dsi: do ULPS in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: dts: dra76x: m_can: fix order of clocks
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 28/56] drm/omap: dsi: untangle ulps ops from enable/disable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 27/56] drm/omap: dsi: do bus locking in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 25/56] drm/omap: dsi: move TE GPIO handling into core
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 35/56] drm/omap: dsi: implement check timings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 50/56] drm/omap: dsi: simplify pin config
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 37/56] drm/omap: panel-dsi-cm: support unbinding
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v2 00/18] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] soc: ti: pruss: Remove wrong check against *get_match_data return value
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] power: supply: cpcap-battery: improve handling of 3rd party batteries.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: dts: xt875: add section for kionix kxtf9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM: dts: mapphone: remove xt894 specific things from motorola-mapphone-common.dtsi and add them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as applicable.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 09/12] ARM: dts: omap: Fix schema warnings for pwm-leds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/9] bus: ti-sysc: Support modules without control registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/9] soc: ti: omap-prm: Add pm_clk for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/9] soc: ti: omap-prm: am3: add genpd support for remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/9] remoteproc/wkup_m3: Use reset control driver if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/9] soc: ti: pm33xx: Enable basic PM runtime support for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/9] clk: ti: am33xx: Keep am3 l3 main clock always on for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/9] ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/9] ARM: OMAP2+: Check for inited flag
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/9] Genpd related code changes to drop am335x pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Assert reset only after disabling clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [balbi-usb:testing/next] BUILD SUCCESS e5bf91cd194629853ac2aaab3dd2ebac41d6a899
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] dmaengine: ti: omap-dma: Block PM if SDMA is busy to fix audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 27/56] drm/omap: dsi: do bus locking in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 27/56] drm/omap: dsi: do bus locking in host driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 56/56] drm/omap: remove dss_mgr_ops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 55/56] drm/omap: remove dispc_ops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 15/56] drm/omap: dsi: request VC via mipi_dsi_attach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 54/56] drm/omap: drop unused owner field
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 53/56] drm/omap: remove unused display.c
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 52/56] drm/omap: squash omapdrm sub-modules into one
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH usb-next] usb: dwc3: Use devm_of_platform_populate
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• Re: [PATCH v3 51/56] ARM: omap2plus_defconfig: Update for moved DSI command mode panel
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 50/56] drm/omap: dsi: simplify pin config
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 49/56] drm/omap: simplify DSI manual update code
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 48/56] drm/omap: drop dssdev display field
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 47/56] drm/omap: drop DSS ops_flags
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 46/56] drm/omap: drop empty omap_encoder helper functions
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 45/56] drm/omap: drop unused DSS next pointer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 44/56] drm/omap: simplify omap_display_id
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 43/56] drm/omap: remove unused omap_connector
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 42/56] drm/omap: remove legacy DSS device operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 41/56] drm/omap: dsi: Register a drm_bridge
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 40/56] drm/panel: Move OMAP's DSI command mode panel driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 39/56] drm/omap: remove global dss_device variable
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 38/56] drm/omap: panel-dsi-cm: fix remove()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 37/56] drm/omap: panel-dsi-cm: support unbinding
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 36/56] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 35/56] drm/omap: dsi: implement check timings
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 34/56] drm/omap: drop omapdss-boot-init
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 33/56] drm/omap: dsi: convert to drm_panel
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH usb-next] usb: dwc3: Use devm_of_platform_populate
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 32/56] drm/omap: dsi: drop custom panel capability support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 31/56] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 27/56] drm/omap: dsi: do bus locking in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 29/56] drm/omap: dsi: do ULPS in host driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 28/56] drm/omap: dsi: untangle ulps ops from enable/disable
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 27/56] drm/omap: dsi: do bus locking in host driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 19/56] drm/omap: dsi: drop unused get_te()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 22/56] drm/omap: dsi: use pixel-format and mode from attach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 26/56] drm/omap: dsi: drop custom enable_te() API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 25/56] drm/omap: dsi: move TE GPIO handling into core
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 24/56] drm/omap: dsi: lp/hs switching support for transfer()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 23/56] drm/omap: panel-dsi-cm: use bulk regulator API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 22/56] drm/omap: dsi: use pixel-format and mode from attach
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 21/56] drm/omap: dsi: drop useless sync()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 20/56] drm/omap: dsi: drop unused enable_te()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 19/56] drm/omap: dsi: drop unused get_te()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 18/56] drm/omap: dsi: drop unused memory_read()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 17/56] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 16/56] drm/omap: panel-dsi-cm: drop hardcoded VC
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 15/56] drm/omap: dsi: request VC via mipi_dsi_attach
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 14/56] drm/omap: panel-dsi-cm: use DSI helpers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 13/56] drm/omap: dsi: introduce mipi_dsi_host
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 12/56] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 11/56] drm/omap: dsi: simplify read functions
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/56] drm/omap: dsi: simplify write function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 09/56] drm/omap: dsi: drop virtual channel logic
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 09/56] drm/omap: dsi: drop virtual channel logic
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 09/56] drm/omap: dsi: drop virtual channel logic
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 08/56] drm/omap: dsi: unexport specific data transfer functions
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH usb-next] usb: dwc3: Use devm_of_platform_populate
  • From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
• [PATCH v4] ARM: dts: motorola-mapphone-common: Add dts configureation for the android buttons beneath the screen
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v3] ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to support motorola xt894's magnetometer and motorola xt875's accelerometer respectivly
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v4] ARM: dts: mapphone: remove xt894 specific things from motorola-mapphone-common.dtsi and add them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as applicable.
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v2] ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to support motorola xt894's magnetometer and motorola xt875's accelerometer respectivly
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v3] ARM: dts: xt875: add section for kionix kxtf9
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v3] ARM: dts: mapphone: remove xt894 specific things from motorola-mapphone-common.dtsi and add them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as applicable.
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Nikhil Devshatwar <nikhil.nd@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [Letux-kernel] [REGRESSION] opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/16] PCI: dwc: Another round of clean-ups
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [Letux-kernel] [REGRESSION] opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [Letux-kernel] [REGRESSION] opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 07/56] drm/omap: panel-dsi-cm: convert to transfer API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/56] drm/omap: dsi: add generic transfer function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/56] drm/omap: constify write buffers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 04/56] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/56] drm/omap: drop unused dsi.configure_pins
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 02/56] Revert "drm/omap: dss: Remove unused omap_dss_device operations"
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/56] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [REGRESSION] opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [REGRESSION] opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v3 02/56] Revert "drm/omap: dss: Remove unused omap_dss_device operations"
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 12/16] PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 11/16] PCI: dwc: Move dw_pcie_msi_init() into core
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 10/16] PCI: dwc: Move link handling into common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 06/16] PCI: dwc/dra7xx: Use the common MSI irq_chip
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 03/16] PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 00/16] PCI: dwc: Another round of clean-ups
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 40/56] drm/panel: Move OMAP's DSI command mode panel driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 40/56] drm/panel: Move OMAP's DSI command mode panel driver
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v3] mfd: tps65910: Correct power-off programming sequence
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v3 56/56] drm/omap: remove dss_mgr_ops
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 55/56] drm/omap: remove dispc_ops
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 54/56] drm/omap: drop unused owner field
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 53/56] drm/omap: remove unused display.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 52/56] drm/omap: squash omapdrm sub-modules into one
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 51/56] ARM: omap2plus_defconfig: Update for moved DSI command mode panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 50/56] drm/omap: dsi: simplify pin config
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 49/56] drm/omap: simplify DSI manual update code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 48/56] drm/omap: drop dssdev display field
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 47/56] drm/omap: drop DSS ops_flags
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 46/56] drm/omap: drop empty omap_encoder helper functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 45/56] drm/omap: drop unused DSS next pointer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 44/56] drm/omap: simplify omap_display_id
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 43/56] drm/omap: remove unused omap_connector
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 40/56] drm/panel: Move OMAP's DSI command mode panel driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 42/56] drm/omap: remove legacy DSS device operations
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 41/56] drm/omap: dsi: Register a drm_bridge
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 39/56] drm/omap: remove global dss_device variable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 38/56] drm/omap: panel-dsi-cm: fix remove()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 37/56] drm/omap: panel-dsi-cm: support unbinding
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 36/56] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 35/56] drm/omap: dsi: implement check timings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 34/56] drm/omap: drop omapdss-boot-init
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 33/56] drm/omap: dsi: convert to drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 32/56] drm/omap: dsi: drop custom panel capability support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 31/56] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 30/56] drm/omap: dsi: move panel refresh function to host
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 29/56] drm/omap: dsi: do ULPS in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 28/56] drm/omap: dsi: untangle ulps ops from enable/disable
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 27/56] drm/omap: dsi: do bus locking in host driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 26/56] drm/omap: dsi: drop custom enable_te() API
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 25/56] drm/omap: dsi: move TE GPIO handling into core
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 24/56] drm/omap: dsi: lp/hs switching support for transfer()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 08/56] drm/omap: dsi: unexport specific data transfer functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 22/56] drm/omap: dsi: use pixel-format and mode from attach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 10/56] drm/omap: dsi: simplify write function
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 23/56] drm/omap: panel-dsi-cm: use bulk regulator API
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 21/56] drm/omap: dsi: drop useless sync()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 19/56] drm/omap: dsi: drop unused get_te()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 20/56] drm/omap: dsi: drop unused enable_te()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 16/56] drm/omap: panel-dsi-cm: drop hardcoded VC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 18/56] drm/omap: dsi: drop unused memory_read()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 17/56] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 13/56] drm/omap: dsi: introduce mipi_dsi_host
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 14/56] drm/omap: panel-dsi-cm: use DSI helpers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 15/56] drm/omap: dsi: request VC via mipi_dsi_attach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 12/56] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 11/56] drm/omap: dsi: simplify read functions
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 09/56] drm/omap: dsi: drop virtual channel logic
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 07/56] drm/omap: panel-dsi-cm: convert to transfer API
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 06/56] drm/omap: dsi: add generic transfer function
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 03/56] drm/omap: drop unused dsi.configure_pins
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 02/56] Revert "drm/omap: dss: Remove unused omap_dss_device operations"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 04/56] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 05/56] drm/omap: constify write buffers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 01/56] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 00/56] Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3] mfd: tps65910: Correct power-off programming sequence
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 4/5] mfd: tps65910: clean up after switching to regmap
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/5] mfd: tps65911-comparator: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/5] gpio: tps65910: use regmap accessors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v3] mfd: tps65910: Correct power-off programming sequence
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 3/8] mfd: Constify static struct resource in OMAP2+ drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
  • From: Xu Wang <vulab@xxxxxxxxxxx>
• Re: [PATCH v2] Drivers: input: misc: Add driver touchscreen-buttons to support physically labeled buttons on touch screen surfaces
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] ARM: dts: motorola-mapphone-common: Add dts configureation for the android buttons beneath the screen
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH net-next v3 00/10] net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2] Drivers: input: misc: Add driver touchscreen-buttons to support physically labeled buttons on touch screen surfaces
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next] selftests/net: timestamping: add ptp v2 support
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to support motorola xt894's magnetometer and motorola xt875's accelerometer respectivly
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v2] ARM: dts: xt875: Add section and support for kionix kxtf9 on XT875
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH net-next] selftests/net: timestamping: add ptp v2 support
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net-next] selftests/net: timestamping: add ptp v2 support
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH 1/1] power: supply: cpcap-battery: improve handling of 3rd party batteries.
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH v3] ARM: dts: motorola-mapphone-common: Add dts configureation for the android buttons beneath the screen
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH v3] ARM: dts: motorola-mapphone-common: Add dts configureation for the android buttons beneath the screen
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] bus: ti-sysc: Fix bogus resetdone warning for cpsw
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH net-next v3 03/10] net: ethernet: ti: am65-cpsw: use cppi5_desc_is_tdcm()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 04/10] net: ethernet: ti: cpsw_ale: add cpsw_ale_vlan_del_modify()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 07/10] net: ethernet: ti: am65-cpsw: fix tx csum offload for multi mac mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 06/10] net: ethernet: ti: am65-cpsw: keep active if cpts enabled
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 05/10] net: ethernet: ti: am65-cpsw: fix vlan offload for multi mac mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 09/10] net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 10/10] net: ethernet: ti: am65-cpsw: handle deferred probe with dev_err_probe()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 08/10] net: ethernet: ti: am65-cpsw: prepare xmit/rx path for multi-port devices in mac-only mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 02/10] net: ethernet: ti: am65-cpsw: move free desc queue mode selection in pdata
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 01/10] net: ethernet: ti: am65-cpsw: move ale selection in pdata
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next v3 00/10] net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 4/4] bus: ti-sysc: Fix bogus resetdone warning for cpsw
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/2] AMR: DTS: fix and extension for Pandaboard ES
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3] ARM: dts: motorola-mapphone-common: Add dts configureation for the android buttons beneath the screen
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [PATCH v7 08/12] ARM: dts: imx: Fix schema warnings for pwm-leds
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 12/13] PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 11/13] PCI: dwc: Move dw_pcie_msi_init() into core
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 10/13] PCI: dwc: Move link handling into common code
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 09/13] PCI: dwc: Rework MSI initialization
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 08/13] PCI: dwc: Move MSI interrupt setup into DWC common code
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 07/13] PCI: dwc: Drop the .set_num_vectors() host op
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 05/13] PCI: dwc: Ensure all outbound ATU windows are reset
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH 03/13] PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next] selftests/net: timestamping: add ptp v2 support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v1] of: platform: Batch fwnode parsing in the init_machine() path
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] documentation: dts documentation for touchscreen-buttons
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v2] ARM: dts: motorola-mapphone-common: Add dts configureation for the android buttons beneath the screen
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH v2] Drivers: input: misc: Add driver touchscreen-buttons to support physically labeled buttons on touch screen surfaces
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH] usb: musb: Fix suspend with devices connected for a64
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/13] PCI: dwc/imx6: Drop setting PCI_MSI_FLAGS_ENABLE
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: xt875: Improve dts support for Motorola XT875
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: xt875: Improve dts support for Motorola XT875
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH 05/42] mfd: axp20x: use PLATFORM_DEVID_NONE
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• [PATCH 07/13] PCI: dwc: Drop the .set_num_vectors() host op
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml
  • From: Alexander Dahl <post@xxxxxxxxxxx>
• [PATCH 05/13] PCI: dwc: Ensure all outbound ATU windows are reset
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 09/13] PCI: dwc: Rework MSI initialization
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 00/12] leds: pwm: Make automatic labels work
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [RESEND PATCH 03/42] mfd: as3722: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 01/42] mfd: arizona: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 04/42] mfd: atmel-hlcdc: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 07/42] mfd: bcm590xx: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 09/42] mfd: da9150: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 14/42] mfd: lp3943: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 13/42] mfd: lp8788: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 16/42] mfd: max77686: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 18/42] mfd: max77843: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 29/42] mfd: sta2x11: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 28/42] mfd: sky81452: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 32/42] mfd: tps6507x: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 31/42] mfd: timberdale: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 33/42] mfd: tps65090: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 34/42] mfd: tps65217: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 35/42] mfd: tps6586x: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 36/42] mfd: tps65910: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 37/42] mfd: tps80031: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 01/13] PCI: dwc/imx6: Drop setting PCI_MSI_FLAGS_ENABLE
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• [RESEND PATCH 38/42] mfd: twl6040: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 39/42] mfd: vx855: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 40/42] mfd: wl1273: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RESEND PATCH 41/42] mfd: wm8400: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 42/42] mfd: wm8994: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 30/42] mfd: tc3589x: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 22/42] mfd: mc13xxx: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 23/42] mfd: rc5t583: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 26/42] mfd: rt5033: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 27/42] mfd: sec: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 25/42] mfd: retu: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 24/42] mfd: rdc321x: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 21/42] mfd: max8998: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 20/42] mfd: max8997: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 19/42] mfd: max8907: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 17/42] mfd: max77693: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 15/42] mfd: max14577: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 12/42] mfd: kempld: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 11/42] mfd: intel_soc_pmic: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 10/42] mfd: intel_msic: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 08/42] mfd: da9055: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 06/42] mfd: bcm2835: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 05/42] mfd: axp20x: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH 02/42] mfd: as3711: use PLATFORM_DEVID_NONE
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [patch V2 06/13] usb: host: isp1362: Replace in_interrupt() usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 00/13] PCI: dwc: Another round of clean-ups
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 08/13] PCI: dwc: Move MSI interrupt setup into DWC common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 01/13] PCI: dwc/imx6: Drop setting PCI_MSI_FLAGS_ENABLE
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 03/13] PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 00/12] leds: pwm: Make automatic labels work
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 02/13] PCI: dwc/intel-gw: Move ATU offset out of driver match data
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 04/13] PCI: dwc/intel-gw: Remove some unneeded function wrappers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 13/13] PCI: dwc: Remove unnecessary wrappers around dw_pcie_host_init()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 12/13] PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 11/13] PCI: dwc: Move dw_pcie_msi_init() into core
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 06/13] PCI: dwc/dra7xx: Use the common MSI irq_chip
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 10/13] PCI: dwc: Move link handling into common code
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• [balbi-usb:testing/fixes] BUILD SUCCESS 129aa9734559a17990ee933351c7b6956f1dba62
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds
  • From: Alexander Dahl <post@xxxxxxxxxxx>
• Re: [PATCH v3 04/13 ] USB: serial: digi_acceleport: Remove in_interrupt() usage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [patch V2 02/13] USB: serial: keyspan_pda: Replace in_interrupt() usage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Bhushan Shah <bshah@xxxxxxx>
• Re: [Linux-stm32] [PATCH v7 10/12] ARM: dts: stm32: Fix schema warnings for pwm-leds
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Bhushan Shah <bshah@xxxxxxx>
• Re: [PATCH v1] of: platform: Batch fwnode parsing in the init_machine() path
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• [PATCH AUTOSEL 5.9 130/147] ARM: dts: omap4: Fix sgx clock rate for 4430
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.9 111/147] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.8 103/132] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 46/60] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 53/60] ARM: dts: omap4: Fix sgx clock rate for 4430
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 22/30] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 33/46] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 17/25] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 60/80] clk: ti: clockdomain: fix static checker warning
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 72/80] ARM: dts: omap4: Fix sgx clock rate for 4430
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.8 121/132] ARM: dts: omap4: Fix sgx clock rate for 4430
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v7 07/12] ARM: dts: exynos: Fix schema warnings for pwm-leds
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] soc: ti: pruss: Remove wrong check against *get_match_data return value
  • From: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
• [PATCH v3 04/13 ] USB: serial: digi_acceleport: Remove in_interrupt() usage
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 0/9] Genpd related code changes to drop am335x pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/18] Drop remaining pdata for am335x and use genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 9/9] remoteproc/wkup_m3: Use reset control driver if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch V2 02/13] USB: serial: keyspan_pda: Replace in_interrupt() usage
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 9/9] remoteproc/wkup_m3: Use reset control driver if available
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH 18/18] ARM: OMAP2+: Build hwmod related code as needed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/18] ARM: OMAP2+: Drop legacy remaining legacy platform data for am3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/18] ARM: dts: Use simple-pm-bus for genpd for am3 l3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_per
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_fast
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/18] ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/18] ARM: OMAP2+: Drop legacy platform data for am3 instr
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/18] ARM: OMAP2+: Drop legacy platform data for am3 mpuss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/18] ARM: OMAP2+: Drop legacy platform data for am3 ocmcram
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/18] ARM: OMAP2+: Drop legacy platform data for am3 emif
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/18] ARM: OMAP2+: Drop legacy platform data for am3 debugss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/18] ARM: OMAP2+: Drop legacy platform data for am3 and am4 gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/18] ARM: OMAP2+: Drop legacy platform data for am3 wkup_m3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/18] ARM: dts: Configure interconnect target module for am3 wkup_m3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/18] ARM: dts: Configure RTC powerdomain for am3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/18] ARM: OMAP2+: Drop legacy platform data for am3 control module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/18] ARM: dts: Configure also interconnect clocks for am3 system timers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/18] ARM: dts: am33xx: add remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/18] Drop remaining pdata for am335x and use genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/9] soc: ti: omap-prm: am3: add genpd support for remaining PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/9] remoteproc/wkup_m3: Use reset control driver if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/9] soc: ti: pm33xx: Enable basic PM runtime support for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/9] soc: ti: omap-prm: Add pm_clk for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/9] bus: ti-sysc: Support modules without control registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/9] clk: ti: am33xx: Keep am3 l3 main clock always on for genpd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/9] ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/9] ARM: OMAP2+: Check for inited flag
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/9] Genpd related code changes to drop am335x pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] bus: ti-sysc: Fix reset status check for modules with quirks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] bus: ti-sysc: Fix bogus resetdone warning for cpsw
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Few ti-sysc related fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch V2 04/13] USB: serial: digi_acceleport: Remove in_interrupt() usage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [patch V2 03/13] USB: serial: keyspan_pda: Consolidate room query
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [patch V2 02/13] USB: serial: keyspan_pda: Replace in_interrupt() usage
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: xt875: Improve dts support for Motorola XT875
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• [PATCH 1/2] ARM: dts: xt875: Improve dts support for Motorola XT875
  • From: Carl Philipp Klemm <philipp@xxxxxxxx>
• Re: [patch 05/12] usb: xhci: Remove in_interrupt() checks
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [patch 00/12] UBS: Cleanup in_interupt/in_irq/in_atomic() usage
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH 1/1] power: supply: cpcap-battery: improve handling of 3rd party and XT875 batteries.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] power: supply: cpcap-battery: improve handling of 3rd party and XT875 batteries.
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/1] power: supply: cpcap-battery: improve handling of 3rd party and XT875 batteries.
  • From: Dev Null <devnull@xxxxxxxx>
• Re: [PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 00/29] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: [patch V2 12/13] usb: core: Replace in_interrupt() in comments
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch V2 11/13] usb: gadget: udc: Remove in_interrupt()/in_irq() from comments
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch V2 09/13] USB: host: ehci-pmcmsp: Cleanup usb_hcd_msp_remove()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch V2 08/13] usb: hosts: Remove in_interrupt() from comments
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch V2 13/13] usb: atm: Replace in_interrupt() usage in comment
  • From: Duncan Sands <duncan.sands@xxxxxxx>
• [patch V2 02/13] USB: serial: keyspan_pda: Replace in_interrupt() usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 01/13] USB: sisusbvga: Make console support depend on BROKEN
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 03/13] USB: serial: keyspan_pda: Consolidate room query
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 05/13] usb: xhci: Remove in_interrupt() checks
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 09/13] USB: host: ehci-pmcmsp: Cleanup usb_hcd_msp_remove()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 11/13] usb: gadget: udc: Remove in_interrupt()/in_irq() from comments
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 10/13] usb: gadget: pxa27x_udc: Replace in_interrupt() usage in comments
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 12/13] usb: core: Replace in_interrupt() in comments
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 08/13] usb: hosts: Remove in_interrupt() from comments
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 07/13] usbip: Remove in_interrupt() check
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 13/13] usb: atm: Replace in_interrupt() usage in comment
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 06/13] usb: host: isp1362: Replace in_interrupt() usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [patch V2 04/13] USB: serial: digi_acceleport: Remove in_interrupt() usage
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>