On 14/11/2020 21:17, Vladimir Oltean wrote:
On Sat, Nov 14, 2020 at 05:56:54AM +0200, Grygorii Strashko wrote:
This patch enables support for ingress broadcast(BC)/multicast(MC) rate limiting
in TI AM65x CPSW driver (the corresponding ALE support was added in previous
patch) by implementing HW offload for simple tc-flower policer with matches
on dst_mac:
- ff:ff:ff:ff:ff:ff has to be used for BC rate limiting
- 01:00:00:00:00:00 fixed value has to be used for MC rate limiting
Hence tc policer defines rate limit in terms of bits per second, but the
ALE supports limiting in terms of packets per second - the rate limit
bits/sec is converted to number of packets per second assuming minimum
Ethernet packet size ETH_ZLEN=60 bytes.
Examples:
- BC rate limit to 1000pps:
tc qdisc add dev eth0 clsact
tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \
action police rate 480kbit burst 64k
rate 480kbit - 1000pps * 60 bytes * 8, burst - not used.
- MC rate limit to 20000pps:
tc qdisc add dev eth0 clsact
tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00 \
action police rate 9600kbit burst 64k
rate 9600kbit - 20000pps * 60 bytes * 8, burst - not used.
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
I understand this is unpleasant feedback, but don't you want to extend
tc-police to have an option to rate-limit based on packet count and not
based on byte count?
Huh.
I'd be appreciated if you could provide more detailed opinion of how it can look like?
Sry, it's my first experience with tc.
The assumption you make in the driver that the
packets are all going to be minimum-sized is not a great one.
I can
imagine that the user's policer budget is vastly exceeded if they enable
jumbo frames and they put a policer at 9.6 Mbps, and this is not at all
according to their expectation. 20Kpps assuming 60 bytes per packet
might be 9.6 Mbps, and the user will assume this bandwidth profile is
not exceeded, that's the whole point. But 20Kpps assuming 9KB per packet
is 1.44Gbps. Weird.
Sry, not sure I completely understood above. This is specific HW feature, which can
imit packet rate only. And it is expected to be applied by admin who know what he is doing.
The main purpose is to preserve CPU resource, which first of all affected by packet rate.
So, I see it as not "assumption", but requirement/agreement which will be reflected
in docs and works for a specific use case which is determined by presence of:
- skip_sw flag
- specific dst_mac/dst_mac_mask pair
in which case rate determines pps and not K/Mbps.
Also some ref on previous discussion [1] [2]
[1] https://www.spinics.net/lists/netdev/msg494630.html
[2] https://lore.kernel.org/patchwork/patch/481285/
--
Best regards,
grygorii
