From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> Do not try to reset the panel after DSI has been detached, since the DSI clocks may have been disabled at this point. The panel will be disabled and unprepared before being removed and a reset will be done when being probed again. Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c index 19d629a976c5..35a0c7da1974 100644 --- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c +++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c @@ -613,9 +613,6 @@ static int dsicm_remove(struct mipi_dsi_device *dsi) if (ddata->extbldev) put_device(&ddata->extbldev->dev); - /* reset, to be sure that the panel is in a valid state */ - dsicm_hw_reset(ddata); - return 0; } -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
