Hi,
On Tue, Dec 08, 2020 at 02:28:50PM +0200, Tomi Valkeinen wrote:
> As we now have a fixed setup for VCs (VC0 for video stream, VC1 for
> commands), we can simplify the VC setup.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
-- Sebastian
> drivers/gpu/drm/omapdrm/dss/dsi.c | 85 +++++++++++--------------------
> 1 file changed, 31 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
> index d9c2cd849328..c32884f167b8 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dsi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
> @@ -2017,40 +2017,6 @@ static void dsi_vc_initial_config(struct dsi_data *dsi, int vc)
> dsi->vc[vc].source = DSI_VC_SOURCE_L4;
> }
>
> -static int dsi_vc_config_source(struct dsi_data *dsi, int vc,
> - enum dsi_vc_source source)
> -{
> - if (dsi->vc[vc].source == source)
> - return 0;
> -
> - DSSDBG("Source config of VC %d", vc);
> -
> - dsi_sync_vc(dsi, vc);
> -
> - dsi_vc_enable(dsi, vc, 0);
> -
> - /* VC_BUSY */
> - if (!wait_for_bit_change(dsi, DSI_VC_CTRL(vc), 15, 0)) {
> - DSSERR("vc(%d) busy when trying to config for VP\n", vc);
> - return -EIO;
> - }
> -
> - /* SOURCE, 0 = L4, 1 = video port */
> - REG_FLD_MOD(dsi, DSI_VC_CTRL(vc), source, 1, 1);
> -
> - /* DCS_CMD_ENABLE */
> - if (dsi->data->quirks & DSI_QUIRK_DCS_CMD_CONFIG_VC) {
> - bool enable = source == DSI_VC_SOURCE_VP;
> - REG_FLD_MOD(dsi, DSI_VC_CTRL(vc), enable, 30, 30);
> - }
> -
> - dsi_vc_enable(dsi, vc, 1);
> -
> - dsi->vc[vc].source = source;
> -
> - return 0;
> -}
> -
> static void dsi_vc_enable_hs(struct omap_dss_device *dssdev, int vc,
> bool enable)
> {
> @@ -2072,10 +2038,6 @@ static void dsi_vc_enable_hs(struct omap_dss_device *dssdev, int vc,
> dsi_if_enable(dsi, 1);
>
> dsi_force_tx_stop_mode_io(dsi);
> -
> - /* start the DDR clock by sending a NULL packet */
> - if (dsi->vm_timings.ddr_clk_always_on && enable)
> - dsi_vc_send_null(dsi, vc, dsi->dsidev->channel);
> }
>
> static void dsi_vc_flush_long_data(struct dsi_data *dsi, int vc)
> @@ -2270,8 +2232,6 @@ static int dsi_vc_send_long(struct dsi_data *dsi, int vc,
> return -EINVAL;
> }
>
> - dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_L4);
> -
> dsi_vc_write_long_header(dsi, vc, msg->channel, msg->type, msg->tx_len, 0);
>
> p = msg->tx_buf;
> @@ -2331,8 +2291,6 @@ static int dsi_vc_send_short(struct dsi_data *dsi, int vc,
> DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
> vc, msg->type, pkt.header[1], pkt.header[2]);
>
> - dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_L4);
> -
> if (FLD_GET(dsi_read_reg(dsi, DSI_VC_CTRL(vc)), 16, 16)) {
> DSSERR("ERROR FIFO FULL, aborting transfer\n");
> return -EINVAL;
> @@ -3351,8 +3309,6 @@ static void dsi_update_screen_dispc(struct dsi_data *dsi)
>
> DSSDBG("dsi_update_screen_dispc(%dx%d)\n", w, h);
>
> - dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_VP);
> -
> bytespp = mipi_dsi_pixel_format_to_bpp(dsi->pix_fmt) / 8;
> bytespl = w * bytespp;
> bytespf = bytespl * h;
> @@ -3522,14 +3478,12 @@ static int dsi_update_channel(struct omap_dss_device *dssdev, int vc)
>
> dsi_set_ulps_auto(dsi, false);
>
> - dsi_vc_enable_hs(dssdev, vc, true);
> -
> /*
> * Send NOP between the frames. If we don't send something here, the
> * updates stop working. This is probably related to DSI spec stating
> * that the DSI host should transition to LP at least once per frame.
> */
> - r = _dsi_send_nop(dsi, vc, dsi->dsidev->channel);
> + r = _dsi_send_nop(dsi, VC_CMD, dsi->dsidev->channel);
> if (r < 0) {
> DSSWARN("failed to send nop between frames: %d\n", r);
> goto err;
> @@ -3654,6 +3608,35 @@ static int dsi_configure_dsi_clocks(struct dsi_data *dsi)
> return 0;
> }
>
> +static void dsi_setup_dsi_vcs(struct dsi_data *dsi)
> +{
> + /* Setup VC_CMD for LP and cpu transfers */
> + REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_CMD), 0, 9, 9); /* LP */
> +
> + REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_CMD), 0, 1, 1); /* SOURCE_L4 */
> + dsi->vc[VC_CMD].source = DSI_VC_SOURCE_L4;
> +
> + /* Setup VC_VIDEO for HS and dispc transfers */
> + REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_VIDEO), 1, 9, 9); /* HS */
> +
> + REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_VIDEO), 1, 1, 1); /* SOURCE_VP */
> + dsi->vc[VC_VIDEO].source = DSI_VC_SOURCE_VP;
> +
> + if (dsi->data->quirks & DSI_QUIRK_DCS_CMD_CONFIG_VC)
> + REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_VIDEO), 1, 30, 30); /* DCS_CMD_ENABLE */
> +
> + dsi_vc_enable(dsi, VC_CMD, 1);
> + dsi_vc_enable(dsi, VC_VIDEO, 1);
> +
> + dsi_if_enable(dsi, 1);
> +
> + dsi_force_tx_stop_mode_io(dsi);
> +
> + /* start the DDR clock by sending a NULL packet */
> + if (dsi->vm_timings.ddr_clk_always_on)
> + dsi_vc_send_null(dsi, VC_CMD, dsi->dsidev->channel);
> +}
> +
> static int dsi_init_dsi(struct dsi_data *dsi)
> {
> int r;
> @@ -3696,13 +3679,7 @@ static int dsi_init_dsi(struct dsi_data *dsi)
> if (r)
> goto err3;
>
> - /* enable interface */
> - dsi_vc_enable(dsi, 0, 1);
> - dsi_vc_enable(dsi, 1, 1);
> - dsi_vc_enable(dsi, 2, 1);
> - dsi_vc_enable(dsi, 3, 1);
> - dsi_if_enable(dsi, 1);
> - dsi_force_tx_stop_mode_io(dsi);
> + dsi_setup_dsi_vcs(dsi);
>
> return 0;
> err3:
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
Attachment:
signature.asc
Description: PGP signature
